Free shipping
info@aulitzkytuning.ae
+971 50 660 4009

Air filter | fits BMW M5/M8 incl. Competition/CS (F90/G90/G99/F91/F92/F93) S63 S68 | Aulitzky Tuning

AED 644.57*

Delivery time: Immediately available: approx. 1-3 working days*

place a request
Product number: ATFILTM5F90
Product information "Air filter | fits BMW M5/M8 incl. Competition/CS (F90/G90/G99/F91/F92/F93) S63 S68 | Aulitzky Tuning"

Here you get an original TitanTec sports air filter with all its advantages:
- higher air flow rate
- higher filter performance (even smaller particles are filtered)
- The particles are trapped in the filter after intake and thus remain trapped until cleaning.
- Washable and reusable filter
- Increased air flow and therefore better combustion in the engine
- No reduction in air flow over a minimum of 50,000 km
- Sufficient air even at high engine speeds
- more power
- Better intake noise
- Reduced fuel consumption

Only TitanTec sports air filters use polyurethane as the edge material. Polyurethane is more resistant to petrol, vapours and the like.
It has an ideal remoulding. This ensures that the edge of the filter is 100% sealed even when it is reinserted after cleaning.

The edge surface is made from a single mould.
With many other makes, pores in the edge material and joining surfaces where the edge is joined together often lead to a crack in the edge, which can result in unclean air being sucked into the engine.

With paper filters, the air flow rate is significantly lower and decreases further after just a short period of use.
In addition, paper filters must be disposed of after the specified mileage.
TitanTec sports air filters last a lifetime. This is good for the environment and your wallet.
Compared to TitanTec sports air filters, other washable cotton filters only filter much larger particles.

Cleaning the filters:
A TitanTec sports air filter has no oil residue and has 100% of its original performance again after cleaning.
Cleaning is quick and easy.
We recommend cleaning after 15,000-20,000 kilometres or once a year at the latest.
The best time to clean the air filter is around the end of May or beginning of June, i.e. after the pollen count, as this is the time when the air filter is under the most strain.
Under no circumstances should aggressive cleaning agents such as petroleum ether, cleaning petrol, brake cleaner etc. be used, as this can damage the material.

Details:
1x set of panel filters (right/left)
Length: 264 mm
Width: 215 mm

Compatible vehicles:
BMW M5 (F90) 600 hp, 441 kW, 09/17 to 06/23
BMW M5 (F90) M5 Competition, 625 hp, 460 kW, 07/18 to 06/23
BMW M5 (F90) M5 CS, 635 hp, 467 kW, 03/21 to 02/22
BMW M5 (G90) M5 plug-in hybrid all-wheel drive, 727 hp, 535 kW, from 07/24
BMW M5 Touring (G99) M 5 plug-in hybrid all-wheel drive, 727 hp, 535 kW, from 10/24
BMW M8 Coupe (F92) M8, 600 hp, 441 kW, from 07/19
BMW M8 Coupe (F92) M8 Competition, 625 hp, 460 kW, from 07/19
BMW M8 Gran Coupe (F93) M8, 600 hp, 441 kW, from 11/19
BMW M8 Gran Coupe (F93) M8 Competition, 625 hp, 460 kW, from 11/19
BMW M8 Convertible (F91) M8, 600 hp, 441 kW, from 07/19
BMW M8 Convertible (F91) M8 Competition, 625 hp, 460 kW, from 07/19

Note: This is NOT an original BMW product!

Please enter a valid email address.
Please enter a valid question.
Fields marked with * are mandatory.

There aren't any asked questions yet.
Last seen products

Last seen products

Kevlar Scoop Carbon | fits BMW M3 (E46) 343hp S54 | Eventuri
Facts: Material: Carbon Manufacturer: Eventuri Expert opinon: Material certificate Compatible vehicles: VehicleVehicle typePowerEngine capacityEngine typeBMW 3 Series (E46) ConvertibleM3252kW / 343hp3246cm³S54 B32BMW 3 Series (E46) CoupéM3252kW / 343hp3246cm³S54 B32BMW 3 Series (E46) CoupéM3 CSL265kW / 360hp3246cm³S54 B32

AED 1,109.40*
Oil cooler Race-Spec | fits BMW M3 incl. CRT/GTS (E90/E92/E93) S65 | CSF Race
CSF Race suitable for BMW E9x race specific oil cooler Designed and developed in co-operation with VF Engineering, the manufacturer of high-performance compressor systems. "Drop-in fit requires no adjustments during installation. The only cooler on the market today that does not require cutting of the shroud. Fully TIG welded cast end tank design vs. OEM mechanically bonded and tack welded design for superior reliability and durability. - Accepts all OEM components, including oil line connections, mounting brackets and shroud- Tapered cast end tank design fits the exact contour of the OEM bumper- Turbulised heavy/duty bar/plate design for the most reliable and durable oil cooler for the platform- 8 rows of maximum cooling with a high density multi-fin fin slot design Compatible vehicles:BMW 3 (E90) M3 2007-2011BMW 3 (E90) M3 CRT 2011-2011BMW 3 Convertible (E93) M3 2008-2013BMW 3 Coupe (E92) M3 2007-2013BMW 3 Coupe (E92) M3 GTS 2007-2013

AED 3,274.88*