Air intake system Carbon Ø76mm | VAG 2.0TSI EA888 Gen.4 Golf 8 GTI 245hp | Wagner Tuning

MOVIT DDE steel brake system 396x36mm (6 piston calliper) for the front axle, from 20 inch rims upwardsApplication-focussed development is the cornerstone of this high-performance brake system. The required balance of weight, performance and durability is optimally combined. The uncompromising selection of materials in production results in a highly unique product that meets the diverse requirements of extreme automotive applications. The most important features of the MOVIT brake system are- The progressive staggering of the piston diameters, matched to the vehicle, so that precisely parallel contact pressure between the pad and the disc is guaranteed. This enables even wear of the brake pads and ensures even heat transfer and a reduced system temperature.- Very good heat dissipation due to the open design of the brake pad contour.- Calipers manufactured from high-strength, highly tempered aircraft aluminium 7075 with high-quality material properties (stiffer components, more homogeneous structure), hard anodised and coated with a triple layer of paint.- Optimised stability due to the length of the callipers- Larger brake disc diameter and thickness, more cross holes (each pre-cast hole is re-drilled and countersunk, which has a favourable effect on the flow).- The brake discs are thermally tempered.- The optimised DDE ventilation system (double directional evolvent system) of the brake disc has an 80% larger surface area compared to other brake discs, the temperature of the brake disc is significantly reduced and therefore also the wear.- Long service life of the wearing parts, excellent response behaviour, steel flex lines ensure consistent performance.- Optimally matched brake pads ensure fading resistance, a long service life and reduced wear on spare parts Attention: The conversion means that only rims with at least 20 inches can be fitted! The chassis number of the vehicle on which the brakes are fitted is required for the parts certificate. MOVIT sports brake callipers, 6s1, 6-piston- Milled from high-strength aircraft aluminium 7075- Two-piece- Use of maximum disc size due to long design- Significantly improved rigidity and extended contact surface of the pad- Uniform heat transfer- Reduced system temperature- Low, even pad wear- Progressive piston staggering- Crown system for fixing the brake hose- RAPAD-X system for quick brake pad replacement without removing the caliper from the bracket- Open brake pad track for optimised cooling- Maximum stability- Maximum braking force MOVIT sports brake discs, 396x36mm, 2-piece- Highly efficient DDE cooling system- Perforated for optimum response behaviour even on wet roads- Maximum fading resistance- Special alloy for high thermal conductivity MOVIT comfort brake pads, BE-6s1- Enlarged friction surface- Lower system temperature- Uniform heat transfer- Longer service life Scope of delivery:2x MOVIT brake caliper (left/right)2x MOVIT brake disc (left/right)2x vehicle-specific brake caliper adapter1x set of comfort brake pads2x steel flex lines1x assembly material1x installation instructions and running-in instructions1x parts certificate Compatible vehicles:Audi R8 type 420 -2018Audi S6 Type 4FBMW M2 F87BMW M3 E92BMW M4 F82BMW X5 E70Ford Mustang VI 2016- 2.3l EcoboostFord Mustang VI 5.0 V8 GT 2015-Mercedes Benz W906 Sprinter 3t & 3.5t

MOVIT DDE steel brake system 370x35mm (6 piston calliper) for the front axle, from 18 inch rims upwardsApplication-focussed development is the cornerstone of this high-performance brake system. The required balance of weight, performance and durability is optimally combined. The uncompromising selection of materials in production results in a highly unique product that meets the diverse requirements of extreme automotive applications. The most important features of the MOVIT brake system are- The progressive staggering of the piston diameters, matched to the vehicle, so that precisely parallel contact pressure between the pad and the disc is guaranteed. This enables even wear of the brake pads and ensures even heat transfer and a reduced system temperature.- Very good heat dissipation due to the open design of the brake pad contour.- Calipers manufactured from high-strength, highly tempered aircraft aluminium 7075 with high-quality material properties (stiffer components, more homogeneous structure), hard anodised and coated with a triple paint finish.- Optimised stability due to the length of the callipers- Larger brake disc diameter and thickness, more cross holes (each pre-cast hole is re-drilled and countersunk, which has a favourable effect on the flow).- The brake discs are thermally tempered.- The optimised DDE ventilation system (double directional evolvent system) of the brake disc has an 80% larger surface area compared to other brake discs, the temperature of the brake disc is significantly reduced and therefore also the wear.- Long service life of the wearing parts, excellent response behaviour, steel flex lines ensure consistent performance.- Optimally matched brake pads ensure fading resistance, a long service life and reduced wear on spare parts Attention: The conversion means that only rims with at least 18 inches can be fitted! The chassis number of the vehicle on which the brakes are fitted is required for the parts certificate. MOVIT sports brake callipers, 6s5, 6-piston- Milled from high-strength aircraft aluminium 7075- Two-piece- Use of maximum disc size due to long design- Significantly improved rigidity and extended contact surface of the pad- Uniform heat transfer- Reduced system temperature- Low, even pad wear- Progressive piston staggering- Crown system for fixing the brake hose- RAPAD-X system for quick brake pad replacement without removing the caliper from the bracket- Open brake pad track for optimised cooling- Maximum stability- Maximum braking force MOVIT sports brake discs, 370x35mm, 2-piece- Highly efficient DDE cooling system- Perforated for optimum response behaviour even on wet roads- Maximum fading resistance- Special alloy for high thermal conductivity MOVIT comfort brake pads, BE-6s1- Enlarged friction surface- Lower system temperature- Uniform heat transfer- Longer service life Scope of delivery:2x MOVIT brake caliper (left/right)2x MOVIT brake disc (left/right)2x vehicle-specific brake caliper adapter1x set of comfort brake pads2x steel flex lines1x assembly material1x installation instructions and running-in instructions1x parts certificate Compatible vehicles:BMW 1 Series F20 / F21 (also M)Ford Focus RS CB4 / MKIIAudi RS3 8PAudi RS4 B5Audi S4 Type 8D / B5BMW M3 E46BMW M3 E46 CSLBMW M3 E92Ford Mustang V Shelby GT 500Mercedes Benz W639 Vito / VianoVolvo XC90 1st gen. from 2011 onwardsVW Golf VII GTI / GTD 57 series pistonsVW Golf VII GTI / GTD 57 series pistonsVW GOLF VII GTI Clubsport / Performance 60 series pistonsVW Golf VII RVW Golf VII RVW T5 / T6 Multivan

Facts: - 2x 3” (76mm), replaces the main catalyst - with 200 cell stainless steel sports catalyst - Euro 6 compatible - for current OPF models - with Thermo-Integral insulation (for an extra charge) - with ECE approval* Compatible vehicles:VehicleVehicle typePowerCapacityEngineYear of construction BMW 2er (G87)M2338kW / 460hp2993cm³S58 B30 A11.22 - BMW 3 Series (G80)M3353kW / 480hp2993cm³S58 B30 B11.20 - BMW 3 Series (G80/G81)M3 Competition / xDrive375kW / 510hp390kW / 530hp2993cm³S58 B30 A05.21 -07.24 - BMW 3 Series (G80)M3 CS xDrive405kW / 551hp2993cm³S58 B30 A03.23 - BMW 4 Series (G82)M4353kW / 480hp2993cm³S58 B30 B11.20 - BMW 4 Series (G82/G83)M4 Competition / M xDrive375kW / 510hp2993cm³S58 B30 A11.20 - BMW 4 Series (G82)M4 CSL xDrive405kW / 551hp412kW / 560hp2993cm³S58 B30 A05.22 - 02.2311.22 - 02.23 Note: Depending on the software version, the engine control light may light up. We recommend the purchase of an OFF set module or software customisation. *This downpipe has ECE approval so that it can be used within the scope of the German Road Traffic Licensing Regulations (StVZO) without registration in the vehicle documents.

Facts: - 3" (76mm) stainless steel rear silencer - with Thermo-Integral insulation - Tailpipe not selectable, pipe outlets for original trim in the rear apron - Original exhaust flap control is decommissioned - without approval* Scope of delivery: - 1x rear silencer Compatible vehicles:VehicleVehicle typePowerEngine capacityEngineYear of constructionFerrari F8 Tributo Coupe3.9530kW / 721hp3902cm³F 154 CD03.19 -Ferrari F8 Spider3.9530kW / 721hp3902cm³F 154 CD12.19 - *ATTENTION :Exhaust systems without approval are not permitted for use on public roads and are only intended for racing purposes! If you nevertheless install a product without approval in your vehicle and use it within the scope of the StVZO, you are liable to prosecution. Possible consequences that you can expect in this case: Expiry of the operating licence in accordance with §19 of the StVZO and possible resulting immobilisation of the vehicle. Other possible consequences, such as a charge of tax evasion, as well as possible investigations by the environmental authorities are at the discretion of the investigators.

Upgrade your Mercedes AMG M177 with the BlackBoost Generation 2 Cold Air Intake System - perfect for performance enthusiasts looking for more power, efficiency and a striking aesthetic. State-of-the-art design and durabilityThese airboxes are made from high-strength aluminum, laser-cut, assembled with stainless steel fasteners and coated with black powder for durability. This design ensures optimum performance under extreme conditions. Custom engine coverThe intake system includes a custom engine cover that combines style with functionality. Not only does it protect vital components, but it also enhances the look of your engine bay with a refined, modern aesthetic. Dual Synthetic High-Flow Dry Air FiltersEquipped with newly developed 4.3-inch high-flow filters, this system maximizes surface area for optimal airflow and filtration. The synthetic filter element allows for cleaner air intake, increasing engine power and overall performance. Synthetic Composite Pipe with 1/8″ NPT Pre-Turbo Methanol PortThis high performance pipe features 1/8″ NPT ports and is compatible with pre-turbo methanol injection upgrades to lower intake temperatures. Its oversized design further improves power delivery. Oversized couplings for maximum performanceThe system features oversized couplings designed for improved heat resistance and airflow.Designed for durability and ease of installation, these couplings are ideal for high performance applications in extreme conditions. Included:- Powder coated airbox- Oval double dry filters with high flow rate- Oversized intake manifold made from molded synthetic composite material- AMG badge transfer kit- Extension cable for airbox pressure sensor Key features:- Proven performance increase of 8-30+ on production vehicles- Improved responsiveness across the entire rev range- Optimized airflow and increased volume range compared to the original- Intake manifold made of synthetic composite material for optimum air circulation- 1/8 NPT connection in the pipe for methanol injection- Enlarged surface area of the filter element- Can support airflow for over 1000 WHP configurations- Larger filter element surface area compared to OEM- Plug and play bolt-on installation- No ECU tuning required- No CEL (check engine light) Compatible vehicles:C63 AMG (W205/C205) - M177 LS1 4.0L V8 BiTurbo - 350kW / 476PS - (2015 - 2021)C63S AMG (W205/C205) - M177 LS1 4.0L V8 BiTurbo - 375kW / 510PS - (2015 - 2021)GLC63 AMG (X253/C253) - M177 LS1 4. 0L V8 BiTurbo - 350kW / 476PS - (2017 - 2022)GLC63S AMG (X253/C253) - M177 LS1 4.0L V8 BiTurbo - 375kW / 510PS - (2017 - 2022)S560 (W222/A217/C217) - M176 4.0L V8 BiTurbo - 345kW / 469PS - (2017 - 2020)

Performance-enhancing 3” (76mm) exhaust system with flap control Facts: - Material: Stainless steel - with Thermo-Integral insulation - Tailpipe not selectable, pipe outlets for original trim in the rear apron - without approval* Compatible Vehicles:VehicleVehicle typePowerEngine capacityEngineYear of constructionFerrari F8 Tributo Coupe3.9530kW / 721hp3902cm³F 154 CD03.19 -Ferrari F8 Spider3.9530kW / 721hp3902cm³F 154 CD12.19 - *ATTENTION!Exhaust systems without approval are not permitted for use on public roads and are only intended for racing purposes! If you nevertheless install a product without approval in your vehicle and use it within the scope of the StVZO, you are liable to prosecution. Possible consequences that you can expect in this case: Expiry of the operating license according to §19 of the StVZO and a possible resulting immobilization of the vehicle. Other possible consequences, such as a charge of tax evasion, as well as possible investigations by the environmental authorities are at the discretion of the investigators.