Aulitzky Exhaust | ECE downpipe with sports catalyst | fits BMW M2 Competition/CS (F87) S55

ST wheel nuts & wheel bolts We recommend ST wheel bolts in silver for fitting the D1, D2, DZ and DZX systems. The wheel bolts must be selected longer by the thickness of the spacer disc. The type of bolt head and thread must also be taken into account. Important note! The minimum screw-in depth of the wheel bolts must be observed in all cases: - M12x1.25 min. 8.0 turns- M12x1.5 at least 6.5 turns- M12x1.75 at least 6.5 turns- M14x1.25 min. 9.0 turns- M14x1.5 min. 7.5 turns- M15x1.25 min. 10.0 turns- 1/2" min. 8.0 turns Caution:If the wheel bolt is too long, the axle parts may be damaged! Technical information:Item number:56110451Short description: Wheel bolt M14x1.25x40mm KE60° silver (10 pcs.)Colour: silverApproval: Registration-freeScope of delivery: Set (10 pcs.) in boxDesign: Cone 60°Product: Wheel boltThread: M14x1.25Shank length: 40mmKey width: 17mmcollar: tapered collarProduct category: Wheel bolts / Rim locksBrand: ST

Facts: Material: Carbon Manufacturer: Eventuri Parts certificate: For this product a certificate is available for certain regions and vehicles (details below) The Eventuri carbon intake system for VAG 2.0 TFSI replaces the cuboid OEM airbox and restrictive air ducts with the free-flowing Venturi air filter housing and a completely newly developed air duct. The system is designed so that no hot air is drawn out of the engine compartment. Instead, only pure fresh air reaches the engine to generate maximum performance gains. The air routing has been designed to create an ideal transition between the round opening on the filter housing and the rectangular opening on the cover. Of particular importance is the air baffle at the front behind the radiator grille, which enables a direct supply of cold air into the intake system. The patented Eventuri process also allows the airflow to be accelerated. This is achieved by means of the Venturi effect, in which the inverted conical filter causes the cross-section to become progressively narrower. This ultimately generates an increase in performance, torque and an improvement in response behaviour and sound. A parts certificate is included! Parts certificate The manufacturer's specifications apply for installation. An existing certificate is no guarantee that the product can also be installed in the corresponding vehicle. A certificate is available for this product for the following regions and vehicles: * DE/AT: Vehicle registration document, field K --- CH/LI: Vehicle licence, field 24 Country Model Type approval* DE/AT Audi A3 e1*2007/46*0607*.. DE/AT Audi A3 e1*xx/xx*0607*.. DE/AT Audi S1 e1*xx/xx*0414*.. DE/AT Audi S3 e1*xx/xx*0607*.. DE/AT Audi TT e1*xx/xx*0369*.. DE/AT SEAT Leon e9*2007/46*0094*.. DE/AT SEAT Leon e9*xx/xx*0094*.. DE/AT SEAT Leon Cupra e9*xx/xx*0094*.. DE/AT Skoda Octavia e11*xx/xx*0243*.. DE/AT Skoda Octavia e8*xx/xx*0318*.. DE/AT Skoda Octavia RS e11*xx/xx*0243*.. DE/AT VW Arteon e1*2007/46*1725*.. DE/AT VW Golf e1*2007/46*0623*.. DE/AT VW Golf e1*2007/46*0627*.. DE/AT VW Golf GTI e1*xx/xx*0623*.. DE/AT VW Golf GTI Clubsport e1*xx/xx*0623*.. DE/AT VW Golf GTI Performance e1*xx/xx*0623*.. DE/AT VW Golf R e1*xx/xx*0623*.. DE/AT VW Golf R Variant e1*xx/xx*0627*.. DE/AT VW Polo GTI e1*xx/xx*0510*.. DE/AT VW Scirocco e1*xx/xx*0471*.. DE/AT VW Tiguan e1*xx/xx*0450*.. Compatible vehicles: VehicleVehicle typePowerEngine capacityEngine type Audi A3 (8V)2.0 TFSI / quattro2.0 TFSI140kW / 190hp162kW / 220hp1984cm³CZPBCHHB Audi A3 (8V)S3 quattroS3 quattroS3 quattroS3 quattroS3 quattro206kW / 280hp210kW / 286hp213kW / 290hp221kW / 300hp228kW / 310hp1984cm³CJXBCJXFCJXDCJXCCJXG Audi TT (8J1/8S)2.0 TFSI / quattro169kW / 230hp1984cm³CHHC Audi TT (8J1/8S)TTS quattroTTS quattroTTS quattro210kW / 286hp215kW / 292hp228kW / 310hp1984cm³CJXFCYFBCJXG Seat Leon (5F)2.0 Cupra2.0 Cupra2.0 Cupra2.0 Cupra195kW / 265hp206kW / 280hp213kW / 290hp221kW / 300hp1984cm³CJXECJXACJXHCJXC Seat Leon (5F)2.0 Cupra R228kW / 310hp1984cm³CJXG Skoda Octavia (5E)2.0 TSI RS2.0 TSI RS162kW / 220hp169kW / 230hp1984cm³CHHBCHHA VW Golf 7GTI162kW / 220hp1984cm³CHHB, CXDA, CXCB, CNTC VW Golf 7GTI Performance169kW / 230hp1984cm³CHHA VW Golf 7GTI ClubsportGTI Clubsport S195kW / 265hp228KW / 310hp1984cm³CJXECJXG VW Golf 7RRRRR 360S206kW / 280hp213KW / 290hp221KW / 300hp228kW / 310hp265kW / 360hp1984cm³CJXBCJXDCJXCCJXGCJXC VW Golf 7.5 FaceliftGTI169kW / 230hp1984cm³CHHA VW Golf 7.5 FaceliftGTI TCR213kW / 290hp1984cm³CJXH

Suitable for the following vehicles:Audi S3 8Y 2.0TFSI 228KW/310hp (from 10/2020 MKB: DNFB)Audi TT 8S 45TSI 180kW / 245hp (from 10/2020 MKB: DNPA)Audi TTS 8S 235KW/320hp (from 11/2020 MKB: DNFD)VW Golf VIII type CD2.0 GTI 180kW / 245hp (from 08/2020 MKB: DNPA)VW Golf VIII type CD2.0 GTI Clubsport 220KW/300hp (from 10/2020 MKB: DNFC)VW Golf VIII Type CD2.0 R 235KW/320hp (from 12/2020 MKB: DNFG)VW Passat B8 2.0TSI 206KW/280hp (from 11/2020 MKB:DNFE)VW Arteon (type 3H) 2.0TSI R 206-235KW / 280-320hp (from 12/2020 MKB: DNFE, DNFG)VW T-Roc R 221kW/300hp (from 10/2020 MKB: DNFC)Cupra Leon IV KL Cupra TSI 4Drive 228KW/310hp (from 02/2021 MKB: DNFB)Cupra Formentor VZ 2.0TSI 180kW / 245hp (from 03/2021 MKB: DNPA)Cupra Formentor VZ 2.0TSI 228kW / 310hp (from 11/2020 MKB: DNFB)Skoda Octavia NX 2.0 TSI RS 180kW / 245hp (from 09/2020 MKB: DNPA)Skoda Superb 3V 2.0TSI 206KW/280hp (from 11/2020 MKB:DNFE) With parts certificate! With our Wagner Tuning Competition intercooler, we offer you the perfect solution to exploit the full potential of your vehicle and experience an extraordinary driving experience. With impressive mesh dimensions of 620 mm x 440 mm x 65 mm and an external charge air volume of 17.7 liters (compared to 9 liters for OEM), this high-performance charge air cooler ensures optimum cooling of the charged air. Our newly developed competition high-performance mesh (Tube Fine) not only enables excellent cooling performance, but also ensures sufficient airflow for adjacent components such as the water cooler. The intercooler remains lightweight and weighs only 9.2 kg in total. The cast aluminium end boxes have been optimized using CAD technology and CFD simulations to achieve optimum internal airflow. An integrated air duct in the end box ensures even filling of the competition high-performance mesh. With an inlet and outlet diameter of Ø70 mm, this intercooler offers a significantly lower back pressure compared to the intercooler fitted as standard. In addition, all our charge air coolers are provided with a high-quality anti-corrosion coating, which not only ensures protection against environmental influences, but also has superior heat conduction properties. This ensures a long-lasting and optimum cooling effect with a noticeable increase in performance. Installation is carried out by simply replacing the OEM intercooler and is straightforward. You can rely on our constant quality monitoring to offer you only the highest quality products. Boost your vehicle's performance to a new level and rely on the Competition intercooler. Treat yourself to the upgrade your vehicle deserves! Important information!Our intercooler is currently only compatible with the 5Q0-121-251GN engine water cooler. We are currently working on a solution for vehicles equipped with the current 5WA121251H engine water cooler. Scope of delivery:1 intercooler2 silicone hoses4 hose clamps1 mounting material1 assembly instruction1 parts certificate With parts certificate (for easy registration according to §19 paragraph 3 of the StVZO).

The Wagner Tuning Competition intercooler kit EVO 2 fits the following vehicles with N54 & N55 engine:BMW 335 (x)i E90/E91/E92/93 2006-2011*BMW 335is E92 2009-2013*BMW 135i E82/E88 2008-2013*BMW 1 Series M E82 2011-2013** (reworking of the radiator support required) Would you like to take the performance and efficiency of your vehicle to the next level? Then our Competition Intercooler EVO 2 is the ideal choice. This kit has been specifically designed to meet the high demands of N54 & N55 engines and provide you with an incredible performance boost. Our Competition Intercooler EVO 2 sets the standard with mesh dimensions of 520x210x150 (13,572 cc). This means an impressive 85% larger flow area and an incredible 90% more charge air volume compared to the factory intercooler. Feel the power and acceleration your vehicle deserves. Our high-performance net is a high-quality tube fin net with internal turbulators. Despite its impressive size, the total weight of the intercooler is only 7.4 kg. The end boxes are made of high-quality cast aluminium and have been optimized with the help of flow analyses in the CFD system. The original click connections have been eliminated and the connection diameters at the inlet and outlet have been increased to Ø70 mm. The kit also includes 2 reinforced silicone hoses. Our EVO 2 intercooler offers outstanding cooling properties while minimizing back pressure. This is crucial for optimum performance. All our intercoolers have an anti-corrosion coating with heat conduction properties, which ensures long-lasting and optimal cooling. The kit is completely ready to install and replacing the factory intercooler is easy. It has been tested to up to 6 bar and is pressure-stable. Like all our products, the Competition Intercooler EVO 2 is subject to constant quality monitoring to ensure the highest standards. Prepare to dominate the road with your vehicle. Boost the power, acceleration and handling of your vehicle with our Competition intercooler kit EVO 2. Whether you're on the track or conquering the streets, this kit redefines the performance.In order for our EVO 2 version to fit in all specified vehicles, minor adjustments must be made.For vehicles with the M package, additional adaptation work on the underbody paneling is necessary. Advantages of the Wagner Tuning intercooler:- improved cooling performance- 85% larger inflow area- 90% more charge air volume- Inlet and outlet Ø70 mm- Plug & Play Scope of delivery:1 intercooler (black coated)2 silicone hoses1 aluminum adapter1 mounting material1 assembly instructionAttention: Not approved in the area of the StVZO.

H&R lowering springs for G80 2020-, only with adaptive damping VA30/HA10mm H&R sports spring kits are the ideal solution if you want to optimize the handling of your vehicle and achieve a sporty look while retaining the standard ride comfort. Details:Lowering VA: 30mmLowering HA: 10mmAxle load front: up to 1080 kgRear axle load: up to 1180 kgChassis: for vehicles with electric damper controlType of approval: with general operating permit (ABE) Product benefits:Sporty look and performanceLowering of the vehicle's center of gravityLinear or progressive suspension characteristicsCan be combined with standard or retrofit dampersOptimized driving dynamicsSurface protection through powder coatingMade in Germany Compatible vehicles:BMW M3 (G80) incl. Competition from 2020, only with adaptive M suspension

The Competition intercooler fits the following vehicles:BMW X5 E70 3.0d / 3.0sd (2006-2010)BMW X5 E70 LCI 30dX / 35dX / 35iX / 40dX / 40iX (2009-2013)BMW X6 E71 30dX / 35dX / 35iX / 40dX / 40iX (2007-2014)BMW X5 F15 25d / 25dX / 28iX / 30dX / 35dX / 35i / 35iX / 40dX / 40eX (2012-2018)BMW X6 F16 28iX / 30dX / 35i / 35iX / 40dX (2013-2018) Unleash the full power of your vehicle with the Competition high-performance intercooler. Are you dreaming of a noticeable increase in performance? Our Competition high-performance intercooler makes this dream a reality. With impressive mesh dimensions of 535 mm x 332 mm x 150 mm (stepped to 19.2 liters), our intercooler offers a staggering 113.5% larger flow area and an incredible 120% more charge air volume compared to the original. Our competition high-performance network is based on Tube Fin technology with internal turbulators. Despite its considerable size, the entire intercooler weighs just 12.5 kg. The cast aluminium end boxes have been optimized using flow analyses in the CFD system to reduce the back pressure to a minimum. The result: outstanding cooling properties. Our intercoolers have an anti-corrosion coating with outstanding heat conduction properties that ensure long-lasting and optimum cooling. You can rely on a continuous increase in performance. Our kit is completely ready to install and only requires the replacement of the stock intercooler - a plug-and-play experience. The original charge air hoses can still be used. Our intercooler has been tested at an impressive 6 bar pressure and has proven its pressure stability. You can rely on our constant quality monitoring. This intercooler was specially developed for racing and meets the highest demands.Advantages of the Wagner Tuning intercooler:- Improved cooling performance- 113.5% larger inflow area- 120% more charge air volume- Minimal back pressure- Plug and Play Scope of delivery:1 intercooler1 mounting material1 assembly instructionAttention: Not approved in the area of the StVZO.