Aulitzky Exhaust | Race exhaust system 3” (76mm) with valve control | fits Ferrari F8 Tributo/Spider 721hp | Motorsport articles

MOVIT DDE steel brake system 396x36mm (6 piston calliper) for the front axle, from 20 inch rims upwardsApplication-focussed development is the cornerstone of this high-performance brake system. The required balance of weight, performance and durability is optimally combined. The uncompromising selection of materials in production results in a highly unique product that meets the diverse requirements of extreme automotive applications. The most important features of the MOVIT brake system are- The progressive staggering of the piston diameters, matched to the vehicle, so that precisely parallel contact pressure between the pad and the disc is guaranteed. This enables even wear of the brake pads and ensures even heat transfer and a reduced system temperature.- Very good heat dissipation due to the open design of the brake pad contour.- Calipers manufactured from high-strength, highly tempered aircraft aluminium 7075 with high-quality material properties (stiffer components, more homogeneous structure), hard anodised and coated with a triple layer of paint.- Optimised stability due to the length of the callipers- Larger brake disc diameter and thickness, more cross holes (each pre-cast hole is re-drilled and countersunk, which has a favourable effect on the flow).- The brake discs are thermally tempered.- The optimised DDE ventilation system (double directional evolvent system) of the brake disc has an 80% larger surface area compared to other brake discs, the temperature of the brake disc is significantly reduced and therefore also the wear.- Long service life of the wearing parts, excellent response behaviour, steel flex lines ensure consistent performance.- Optimally matched brake pads ensure fading resistance, a long service life and reduced wear on spare parts Attention: The conversion means that only rims with at least 20 inches can be fitted! The chassis number of the vehicle on which the brakes are fitted is required for the parts certificate. MOVIT sports brake callipers, 6s1, 6-piston- Milled from high-strength aircraft aluminium 7075- Two-piece- Use of maximum disc size due to long design- Significantly improved rigidity and extended contact surface of the pad- Uniform heat transfer- Reduced system temperature- Low, even pad wear- Progressive piston staggering- Crown system for fixing the brake hose- RAPAD-X system for quick brake pad replacement without removing the caliper from the bracket- Open brake pad track for optimised cooling- Maximum stability- Maximum braking force MOVIT sports brake discs, 396x36mm, 2-piece- Highly efficient DDE cooling system- Perforated for optimum response behaviour even on wet roads- Maximum fading resistance- Special alloy for high thermal conductivity MOVIT comfort brake pads, BE-6s1- Enlarged friction surface- Lower system temperature- Uniform heat transfer- Longer service life Scope of delivery:2x MOVIT brake caliper (left/right)2x MOVIT brake disc (left/right)2x vehicle-specific brake caliper adapter1x set of comfort brake pads2x steel flex lines1x assembly material1x installation instructions and running-in instructions1x parts certificate Compatible vehicles:Audi R8 type 420 -2018Audi S6 Type 4FBMW M2 F87BMW M3 E92BMW M4 F82BMW X5 E70Ford Mustang VI 2016- 2.3l EcoboostFord Mustang VI 5.0 V8 GT 2015-Mercedes Benz W906 Sprinter 3t & 3.5t

MOVIT DDE steel brake system 370x35mm (6 piston calliper) for the front axle, from 18 inch rims upwardsApplication-focussed development is the cornerstone of this high-performance brake system. The required balance of weight, performance and durability is optimally combined. The uncompromising selection of materials in production results in a highly unique product that meets the diverse requirements of extreme automotive applications. The most important features of the MOVIT brake system are- The progressive staggering of the piston diameters, matched to the vehicle, so that precisely parallel contact pressure between the pad and the disc is guaranteed. This enables even wear of the brake pads and ensures even heat transfer and a reduced system temperature.- Very good heat dissipation due to the open design of the brake pad contour.- Calipers manufactured from high-strength, highly tempered aircraft aluminium 7075 with high-quality material properties (stiffer components, more homogeneous structure), hard anodised and coated with a triple paint finish.- Optimised stability due to the length of the callipers- Larger brake disc diameter and thickness, more cross holes (each pre-cast hole is re-drilled and countersunk, which has a favourable effect on the flow).- The brake discs are thermally tempered.- The optimised DDE ventilation system (double directional evolvent system) of the brake disc has an 80% larger surface area compared to other brake discs, the temperature of the brake disc is significantly reduced and therefore also the wear.- Long service life of the wearing parts, excellent response behaviour, steel flex lines ensure consistent performance.- Optimally matched brake pads ensure fading resistance, a long service life and reduced wear on spare parts Attention: The conversion means that only rims with at least 18 inches can be fitted! The chassis number of the vehicle on which the brakes are fitted is required for the parts certificate. MOVIT sports brake callipers, 6s5, 6-piston- Milled from high-strength aircraft aluminium 7075- Two-piece- Use of maximum disc size due to long design- Significantly improved rigidity and extended contact surface of the pad- Uniform heat transfer- Reduced system temperature- Low, even pad wear- Progressive piston staggering- Crown system for fixing the brake hose- RAPAD-X system for quick brake pad replacement without removing the caliper from the bracket- Open brake pad track for optimised cooling- Maximum stability- Maximum braking force MOVIT sports brake discs, 370x35mm, 2-piece- Highly efficient DDE cooling system- Perforated for optimum response behaviour even on wet roads- Maximum fading resistance- Special alloy for high thermal conductivity MOVIT comfort brake pads, BE-6s1- Enlarged friction surface- Lower system temperature- Uniform heat transfer- Longer service life Scope of delivery:2x MOVIT brake caliper (left/right)2x MOVIT brake disc (left/right)2x vehicle-specific brake caliper adapter1x set of comfort brake pads2x steel flex lines1x assembly material1x installation instructions and running-in instructions1x parts certificate Compatible vehicles:BMW 1 Series F20 / F21 (also M)Ford Focus RS CB4 / MKIIAudi RS3 8PAudi RS4 B5Audi S4 Type 8D / B5BMW M3 E46BMW M3 E46 CSLBMW M3 E92Ford Mustang V Shelby GT 500Mercedes Benz W639 Vito / VianoVolvo XC90 1st gen. from 2011 onwardsVW Golf VII GTI / GTD 57 series pistonsVW Golf VII GTI / GTD 57 series pistonsVW GOLF VII GTI Clubsport / Performance 60 series pistonsVW Golf VII RVW Golf VII RVW T5 / T6 Multivan

Facts: - 2x 3” (76mm), replaces the main catalyst - with 200 cell stainless steel sports catalyst - Euro 6 compatible - for current OPF models - with Thermo-Integral insulation (for an extra charge) - with ECE approval* Compatible vehicles:VehicleVehicle typePowerCapacityEngineYear of construction BMW 2er (G87)M2338kW / 460hp2993cm³S58 B30 A11.22 - BMW 3 Series (G80)M3353kW / 480hp2993cm³S58 B30 B11.20 - BMW 3 Series (G80/G81)M3 Competition / xDrive375kW / 510hp390kW / 530hp2993cm³S58 B30 A05.21 -07.24 - BMW 3 Series (G80)M3 CS xDrive405kW / 551hp2993cm³S58 B30 A03.23 - BMW 4 Series (G82)M4353kW / 480hp2993cm³S58 B30 B11.20 - BMW 4 Series (G82/G83)M4 Competition / M xDrive375kW / 510hp2993cm³S58 B30 A11.20 - BMW 4 Series (G82)M4 CSL xDrive405kW / 551hp412kW / 560hp2993cm³S58 B30 A05.22 - 02.2311.22 - 02.23 Note: Depending on the software version, the engine control light may light up. We recommend the purchase of an OFF set module or software customisation. *This downpipe has ECE approval so that it can be used within the scope of the German Road Traffic Licensing Regulations (StVZO) without registration in the vehicle documents.

Facts: - 3" (76mm) stainless steel rear silencer - with Thermo-Integral insulation - Tailpipe not selectable, pipe outlets for original trim in the rear apron - Original exhaust flap control is decommissioned - without approval* Scope of delivery: - 1x rear silencer Compatible vehicles:VehicleVehicle typePowerEngine capacityEngineYear of constructionFerrari F8 Tributo Coupe3.9530kW / 721hp3902cm³F 154 CD03.19 -Ferrari F8 Spider3.9530kW / 721hp3902cm³F 154 CD12.19 - *ATTENTION :Exhaust systems without approval are not permitted for use on public roads and are only intended for racing purposes! If you nevertheless install a product without approval in your vehicle and use it within the scope of the StVZO, you are liable to prosecution. Possible consequences that you can expect in this case: Expiry of the operating licence in accordance with §19 of the StVZO and possible resulting immobilisation of the vehicle. Other possible consequences, such as a charge of tax evasion, as well as possible investigations by the environmental authorities are at the discretion of the investigators.

Facts:Material: CarbonManufacturer: EventuriParts certificate: A certificate is available for this product for certain regions and vehicles (details below) Introducing our E9X carbon fiber air collector. Made from 100% high quality prepreg carbon including the inner trumpets, this air collector replaces the stock plastic version and unleashes the roar of the naturally aspirated V8 engine.As the trumpet lengths are tuned to the inner volume, changing this setting can result in a loss of power, so we have kept the same volume so as not to affect the way the car drives in terms of power delivery. Although there is no performance gain from the carbon plenum, the intake noise produced takes the driving experience to a whole new level. We went through several iterations with different material thicknesses to fine tune the sound, and the resulting plenum produces an almost unbelievable intake sound! This plenum can be used with the OEM airbox or any other aftermarket intake system, including our own Eventuri intake systems for a real performance boost. Parts certificateThe manufacturer's specifications apply to installation. An existing certificate is no guarantee that the product can also be installed in the corresponding vehicle. A certificate is available for this product for the following regions and vehicles:* DE/AT: Vehicle registration document, field K --- CH/LI: Vehicle registration document, field 24Country model type approval*DE/AT BMW E90 M3 e1*2007/46*0377*..DE/AT BMW E92 M3 e1*2007/46*0377*..DE/AT BMW E93 M3 e1*2007/46*0377*..DE/AT BMW GTS e1*KS07/46*0012*..DE/AT BMW M3 e1*2001/116*0345*.. Compatible vehicles:VehicleVehicle typePowerEngine capacityEngine typeYear of construction BMW 3er (E90/E92/E93)M3309kW / 420hp3999cm³S65 B40 A06.07 - 06.13