Brake system Big Brake Kit 378×34mm | fits BMW M2/M3/M4 (F87/F80/F82/F83) | AP Racing

AP Racing

From AED 14,739.24*

Prices excl. VAT plus shipping costs

Delivery time: approx. 2-4 weeks. Exact delivery time on request*.

Variant

Front axle

Rear axle

Front and rear axle

Finanzieren Sie ihren Einkauf über die Targobank.

Product number: AP378X34

Product information "Brake system Big Brake Kit 378×34mm | fits BMW M2/M3/M4 (F87/F80/F82/F83) | AP Racing"

With the AP-Racing Big Brake Kit, we offer a high-performance solution especially for track days and for race track drivers.

The friction rings are mounted floating on the high-strength, milled aluminium pots. The advantages of this are, on the one hand, the lower weight and, on the other, the fact that the friction rings can be replaced cost-effectively when they wear out.

The AP-Racing calipers are racing calipers without dust boots, which are only recommended for use on the racetrack (regular cleaning of the calipers is necessary in normal road traffic).

Details and scope of delivery:
- Big Brake Kit for the front/rear axle, consisting of AP Racing calipers and J-Hook brake discs in 378×34mm
- AP Racing 6-piston brake caliper
- Brake discs 378×34mm, J-Hook
- CNC milled brake caliper adapter incl. material certificate
- Braided steel brake lines
- incl. brake pads
Aluminium pots and floating mounting

Compatible vehicles:
- BMW F87 M2 incl. Competition/CS
- BMW F8x M3/M4 incl. Competition

NOTES:
If we do not expressly refer to a parts certificate or general operating licence (ABE) in the product text, this is a motorsport article that is not approved in the German Road Traffic Regulations (StVZO) and therefore the operating licence expires if no registration is made in accordance with § 21 StVO!

This brake system can only be registered by us after special tests.

Please note that vehicle spare parts should only be installed by a qualified specialist workshop in order to ensure that they function properly and that the vehicle is roadworthy.

Please enter a valid email address.

Your question *

Please enter a valid question.

I agree that my data will be processed to answer the question. I have taken note of the Privacy Policy and agree to the information described therein.*

To continue, enter the characters shown above*

Fields marked with * are mandatory.

There aren't any asked questions yet.

Last seen products

Diffusor type 2 Carbon | fits BMW M3/M4 incl. Competition/CS/GTS (F80/F82/F83) | 3DDesign

The 3DDesign carbon diffuser type 2 is made entirely of carbon fibre and gives the rear of the F80 or F82 an individual look in no time at all. The combination of sportiness and elegance is particularly impressive across the board. In addition, the downforce on the rear axle is slightly increased, which has a positive effect on the aerodynamics of the vehicle. A Type 1 diffuser from 3DDesign is also available, which differs in that it has an additional fin on the side. Compatible vehicles:BMW 4 Convertible (F33, F83) M4 2014-2020BMW 4 Convertible (F33, F83) M4 Competition 2016-2020BMW 4 Coupe (F32, F82) M4 2014-2020BMW 4 Coupe (F32, F82) M4 CS 2017-2019BMW 4 Coupe (F32, F82) M4 Competition 2016-2020BMW 4 Coupe (F32, F82) M4 GTS 2016-2019

AED 7,913.45*

Diffuser Dry Carbon | fits BMW M2 incl. Competition (F87) N55 S55 | AutoTecknic

Autotecknic dry carbon fibre diffuser for 2 Series F87 incl. Competition Compatible vehicles:BMW 2 Coupe (F22, F87) M2 2015-2018BMW 2 Coupe (F22, F87) M2 Competition 2018-2021

AED 3,248.48*

Intake system Carbon | fits Audi RS3 (8V) 367hp | Eventuri

Facts: up to 30 hp more power Material: Carbon Manufacturer: Eventuri Parts certificate: A certificate is available for this product for certain regions and vehicles (details below) The new intake system for the Audi RS3 from Eventuri presents itself with vigour and power. The special look of the intake is the result of a months-long development process, interspersed with countless tests to generate the perfect airflow. The narrow but clear shape of the large scoop and the air duct for the air intake follows the well-known and patented Eventuri housing in which the large air filter sits. Especially for the intake of the Audi RS3, the conical filter housing is followed by an inlet pipe with a diameter of 88 mm (standard 77 mm), which directs the laminar, compressed and maximally efficient airflow directly into the turbo and thus offers up to 30 hp more power. The Eventuri RS3 Intake is supplied with a parts certificate, suitable for all vehicles listed above. The certificate does not exclude exhaust systems from other manufacturers. The Eventuri Intake for the Audi RS3 comes in the following components: Patented carbon filter housing Efficient high-flow cone with urethane filter Carbon scoop 88mm inlet pipe made from full carbon fibre Widely curved housing for air intake 2-piece main heat shield Laser-cut suspension Parts certificate Thanks to the curved conical shape of the housing and the ingenious routing of the airflow at the large intake of the scoop, the airflow is compressed and accelerated by the Venturi effect and thus channelled laminar into the turbo. This not only produces a fat sound but also a noticeable uplift in engine performance. Parts certificate The manufacturer's specifications apply for installation. An existing certificate is no guarantee that the product can also be installed in the corresponding vehicle. A certificate is available for this product for the following regions and vehicles: * DE/AT: Vehicle registration document, field K --- CH/LI: Vehicle licence, field 24 Country Model Type approval* DE/AT Audi RS Q3 (8U) e1*2007/46*0590*.. DE/AT Audi RS Q3 Performance (8U) e1*2007/46*0590*.. DE/AT Audi RS3 (8P/8PA) e1*2007/46*0615*.. DE/AT Audi RS3 (8V) from e1*xx/xx*0608*06 DE/AT Audi RS3 (8V) from e1*xx/xx*0608*08 DE/AT Audi RS3 (8V) e1*2007/46*0608*.. DE/AT Audi RS3 (8V) e1*2007/46*0608*08 DE/AT Audi RSQ3 (F3) e13*xx/xx*2038*.. DE/AT Audi TTRS (8J) e1*2007/46*1686*.. DE/AT Audi TTRS (8J) e1*xx/xx*1686*.. DE/AT Audi TTRS (8J1) e1*KS07/46*0054*.. DE/AT Audi TTRS Plus (8J) e1*2007/46*1686*.. CH/LI Audi RS3 8V 1AF394-1AF399 CH/LI Audi RS3 8V 1AF401-1AF402 Compatible vehicles:VehicleTypePowerEngine capacityEngine type Audi A3 (8V)RS3 quattro270kW / 367hp2480cm³CZGB

AED 7,014.76*

Twin Air Flow Filter Set 110mm | fits Mercedes-Benz AMG | Blackboost

Blackboost Conical Twin Flow Synthetic Dry Air Filters The filter consists of two filter elements, firstly the primary filter element on the outside. The secondary filter element on the top increases the surface area through which the air can flow. Underneath the secondary filter element is a TPU cone which helps to direct the air flowing through the filter, reducing turbulence and increasing the overall flow rate. We opted for dry filters as they allow us to cover a wide range of applications involving mass airflow sensors that are damaged over time by oiled filters. With the synthetic cotton filter element, we can work completely dry (unoiled) and still ensure good filtration and airflow. The layers of the synthetic filter material are better than its non-synthetic counterpart as the layered structure of the synthetic cotton allows a homogeneous airflow through the filter. The kits include the hoses, the moulded plastic composite adapters and the necessary BlackBoost SS316 clamps to keep the components well in place. Features: -Twin Flow technology for more air -Black Boost centre cone for flow optimisation -High flow and homogeneous synthetic filtration -High protection through synthetic filtration -High heat resistance -Plug and Play: can be used in universal applications -Fits plug and play on BlackBoost intake manifolds -Upgraded look, non-invasive, completely black -316 stainless steel BlackBoost clamp for secure attachment -Inlet diameter: 4.3"/ 110mm -Length: 8.6"/ 218mm Scope of delivery: 2x Blackboost Twin Flow Synthetic Dry Conical air filter 2x Black Boost stainless steel 316 clamps

AED 899.73*

Diffusor Carbon | fits BMW M3 incl. GTS (E92) S65 | 3DDesign

The 3DDesign carbon diffuser for the E92 is made entirely of carbon fibre and provides even more sportiness at the rear of the E92. It also increases the downforce on the rear axle, which further improves the aerodynamics of the entire vehicle. Compatible vehicles:BMW 3 Coupe (E92) M3 2007-2013BMW 3 Coupe (E92) M3 GTS 2007-2013

AED 6,251.26*

Diffusor Competition Dry Carbon | fits BMW M5 incl. Competition (F90) S63 | AutoTecknic

Dry Carbon Competition diffuser for the rear center diffuser of the F90. Designed to mount directly to the factory lower mounting position for quick and easy installation. The rear diffuser features durable and precise plastic mounting positions and is manufactured using autoclave technology for ultimate lightweight, high durability and precise fitment. Compatible vehicles:BMW 5 (G30, F90) M5 2017-2023BMW 5 (G30, F90) M5 Competition 2018-2023

AED 3,367.72*

Brake system Big Brake Kit 378×34mm | fits BMW M2/M3/M4 (F87/F80/F82/F83) | AP Racing

Ratenrechner

Ask a question

Previously asked questions