Charge pipe kit Ø66mm | fits Audi S4/S5 (B9/8W/F5) 3.0 TFSI 354hp | Wagner Tuning

The Competition intercooler kit is suitable for:Audi S4 B9 8W 3,0TFSI 260KW/354hp (2016+)*Audi S5 B9 F5 3,0TFSI 260KW/354hp (2016+)** The brackets supplied are only suitable for the EU model. Maximize the performance of your vehicle with our Competition high performance intercooler! Looking for a way to boost your vehicle's performance and efficiency? Our Competition high performance intercooler is the answer. Here's what you can expect from this exceptional product:Our high performance intercooler redefines the standards for performance. With net dimensions of 550 mm x 445 mm x 70 mm (equivalent to 17,130 cc), it offers an impressive 134% larger flow area and 105% more charge air volume compared to the conventional intercooler. This means that your engine receives more cooled air, resulting in a noticeable increase in performance. Our competition high performance mesh is made of high quality tube fin material with internal turbulators. This ensures maximum heat transfer and efficient airflow to keep cooling performance at the highest level.Despite its imposing size, our intercooler is surprisingly light, weighing just 9.5 kg. This minimizes the load on your vehicle and helps to improve overall performance.The kit is also available with complete charge air piping as an option. Want to get the most out of your intercooler? Our kit with complete charge air piping is the answer. It includes three reinforced silicone hoses and an aluminum charge air pipe for even better performance. The cast aluminium end boxes of our intercooler were developed and optimized with the help of flow analyses in the CFD system. The result is excellent cooling properties with minimal back pressure. All our intercoolers are equipped with an anti-corrosion coating that also has excellent heat conduction properties. This ensures permanent and optimum cooling, which is reflected in an impressive increase in performance. Our kit is completely ready to install and enables simple replacement with the standard intercooler. No complex conversion required - simply plug-and-play. Tested at up to 6 bar and pressure-stable. Our products are subject to strict quality control and are also suitable for racing. Boost the performance of your vehicle with our Competition high-performance intercooler and feel the difference every time you drive. Experience a new dimension in vehicle performance! Dimensions original intercooler:720mm x 145mm x 80mmV=8.35 litersA=1044 cm² Wagner Tuning intercooler dimensions:550mm x 445mm x 70mmV=17.13 litersA=2447 cm² Scope of delivery intercooler single:1 intercooler (black coated)1 Ø65mm aluminum charge air pipe (black coated) / optional3 reinforced silicone hoses (black) / optional1 mounting material1 assembly instructions Scope of delivery charge air cooler + charge air pipe:1 intercooler (black coated)1 Ø65mm aluminum charge air pipe (black coated) / optional3 reinforced silicone hoses (black) / optional1 mounting material1 assembly instructionsAttention: Not approved in the area of the StVZO.

Vorsteiner 458-VX Aero carbon rear bumper with rear diffuser (incl. exhaust trims) for Ferrari 458 Italia Expertise: Material certificate Compatible vehicles:FERRARI 458 4.5 2009-2015FERRARI 458 4.5 since 2009FERRARI 458 4.5 Since 2013

KW V1 coilover suspension Sportiness paired with outstanding looks. With factory pre-configured damping.Our entry-level model for more driving pleasure through an appealing and individually adjustable lowering is the KW V1 coilover suspension in the KW typical "inox-line". Thanks to its high-quality workmanship, the consistent use of stainless steel struts, corrosion-resistant springs and harmonised components, it stands for many years of driving pleasure - and not just for the life of the car. Stepless loweringThe KW V1 enables maximum lowering within the tested adjustment range. This varies depending on the vehicle model and can, for example, be between 30 and 70 millimetres or 50 to 90 millimetres for an individual lowering. Thanks to the dirt-resistant trapezoidal thread and the polyamide threaded ring, the stepless lowering can be varied quickly and easily even years later. Depending on the vehicle, the lowering is carried out either on the wheel-guiding KW stainless steel suspension struts or on the rear axle height adjustment for non-wheel-guiding double-wishbone rear axles. The benchmark for sporty, dynamic tuning fansWith its harmonious basic set-up for sporty driving on the road, the KW V1 convinces the discerning tuning fan. Our development engineers determine a specific damper set-up and spring rate for each vehicle in order to increase your driving pleasure with the optimum balance of sportiness and suitability for everyday use. After all, you are not buying just any coilover suspension, but a KW coilover suspension that has been specially developed and tuned for your vehicle type. As a manufacturer, KW only uses its own resources, high-quality components and the same damper technology as mass-produced manufacturers. With the KW V1, the rolling and rolling movements of the vehicle body are reduced during compression, allowing you to benefit from unadulterated directness and sportier handling when driving. Our experience for your driving pleasureAs a manufacturer of customised suspension solutions for road and racing, we have been the market leader and innovation driver for over 25 years. No matter where in the world, sporty drivers, car manufacturers and tuners rely on our KW coilovers "Made in Germany". Every KW coilover suspension is subjected to extensive load tests during production and is developed and manufactured directly at our company headquarters in Fichtenberg, Swabia, in order to fulfil the high standards of our KW quality management. As a German manufacturer, it is a matter of course for us to provide a multi-year warranty on our KW coilover suspension kits, which exceed OEM quality and cover over 4,600 applications. When installed by one of our KW specialist dealers, this warranty is valid for up to five years. - Optimally adjusted in advance- sporty and harmonious damping technology- Stainless steel technology "inox-line"- Individually height-adjustable- Tested adjustment range- Ready-to-install complete solution- High-quality components for a long service life- Complete documentation for easy handling Setup - factory pre-configured damping setupThe KW V1 has a vehicle-specific, permanently configured damper setup. The spring and the damper are perfectly matched to each other so that you experience an optimum balance of sportiness and suitability for everyday use when driving. Even with a full payload and maximum axle loads, the dampers always work with a sporty characteristic curve. The KW V1 is particularly interesting for tuning enthusiasts who prioritise the show & shine concept. Please note the conditions and instructions for this product: - VA + HA height-adjustable (VA coilover struts, HA springs with height adjustment + damper) Technical info: Lowering VA/HA (mm): 25-40/20-40 Version: V1 Hardness adjustment: none Material: stainless steel Adjustment VA/HA: thread/thread Approval: parts certificate (§19.3) Compatible vehicles: Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive FORD FOCUS III Turnier (DYB) 07/2010- 2.0 ST Kombi Petrol 184 KW 1999 ccm 4 Front-wheel drive FORD FOCUS III Turnier (DYB) 07/2010- 2.0 TDCi ST Kombi Diesel 136 KW 1997 ccm 4 Front-wheel drive

KW V3 Clubsport coilover suspension incl. support bearing With an uncompromising technology transfer from racing to the road, the KW Clubsport coilovers convince.The KW Clubsport coilovers convince with their uncompromising combination of high-end racing technology with maintenance-free KW original equipment components and expertises.This gives you the ideal accessories to realise the full potential of your sports car at trackdays, sports driver training courses, tourist drives on Grand Prix circuits and on the Nürburgring Nordschleife. Developed for the toughest racetrack in the world: the Nürburgring NordschleifeEven in their basic set-up, KW Clubsport coilovers are tuned to the different track surfaces, steep bends, jumps and chicanes of the 20.8 kilometre long Nürburgring Nordschleife. After all, as one of the most successful suspension manufacturers and suppliers in motorsport, we are at home on the Nordschleife.In the VLN Endurance Championship alone, we equip over 70 racing teams and, as a suspension manufacturer, have supported six overall victories at the ADAC Zurich 24h Race Nürburgring in ten years. The winner of the ADAC GT Masters 2011 also relies on our racing expertise, from which the KW Clubsport coilovers benefit.The basic setup of the KW V3 Clubsport and KW V4 Clubsport with separate expansion tank, which is perfectly adapted to the Nordschleife, allows you to adjust your sports car even more individually to the desired sports tyre setup thanks to the numerous adjustment options.In addition to optionally available adjustable support bearings, you can adjust the damping forces of the KW Clubsport coilovers independently in the rebound and compression stages with the integrated KW V3 Clubsport coilover suspension technology like in racingWith the adjustment wheels for the rebound adjustment, you can fine-tune the recommended basic setup for your sports car and your individually installed performance components with 16 exact clicks. This allows you to directly influence changed wheel loads, for example to influence bodywork movements. Separate from the rebound adjustment, the KW V3 Clubsport allows you to adjust the compression damping with twelve exact clicks in the low-speed range to your requirements, such as the sports tyres used.These setting options allow you to consider individual setups to suit the vehicle weight, sports tyre characteristics, track characteristics and operating conditions. - Freely adjustable damping technology in rebound and compression damping- Stainless steel technology "inox-line"- Stepless lowering- Tested adjustment range- high-quality components for a long service life- Adjustable rebound damping with 16 exact clicks- Adjustable compression damping with 12 exact clicks- Unique, independently acting damping force adjustment- optionally available with aluminium Unibal support bearing. Setup: Application range and damper tuningThe KW V3 Clubsport coilover suspensions impress with their vehicle-specific setup for trackday events on the Nürburgring Nordschleife, as well as the possibility of quickly tuning these suspensions for other racetracks and individual performance sports cars. Please note the conditions and instructions for this product: - VA + HA height adjustable (VA coilover struts, HA springs with height adjustment + damper) - Clubsport suspension with support bearing: only available with VA support bearing Technical information: Lowering VA/HA (mm): 25-50/20-45 Version: V3 Clubsport Hardness adjustment: Rebound and compression Material: Stainless steel Adjustment VA/HA: Thread/thread Approval: Parts certificate (§19.3) Compatible vehicles: Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive FORD FOCUS II (DA_) 07/2004-09/2013 2.5 RS Hatchback Petrol 224 KW 2521 ccm 5 Front-wheel drive FORD FOCUS II (DA_) 07/2004-09/2013 2.5 RS 500 Hatchback Petrol 257 KW 2521 ccm 5 Front-wheel drive