Competition intercooler kit | fits Audi RS6 (C6/4F) 580hp | Wagner Tuning

The carbon eyebrows for the headlights add a subtle touch of aggressiveness to the vehicle without losing the clean look.Details:- 100% pure pre-preg carbon fibre construction- High gloss finish- Fit guarantee- Registration according to §21 possible Compatible vehicles:- BMW G87 2 Series M2Note: This is NOT an original BMW product!

Facts: more power, better response behaviour and a new sound experience Material: Carbon Manufacturer: Eventuri Parts certificate: A certificate is available for this product for certain regions and vehicles (details below) The Eventuri Carbon Kevlar intake system for F10 is designed to increase engine performance, improve handling and enhance the overall driving experience. Using an inverted cone shaped filter enclosed in a carbon/kevlar housing, Eventuri utilises the so-called Venturi effect. The result is an even laminar airflow, which not only provides more power but also better response behaviour and a new sound experience. The airbox is manufactured using the pre-preg process. The intake system is supplied complete with a parts certificate! Parts certificate The manufacturer's specifications apply for installation. An existing certificate is no guarantee that the product can also be installed in the corresponding vehicle. A certificate is available for this product for the following regions and vehicles: * DE/AT: Vehicle registration document, field K --- CH/LI: Vehicle licence, field 24 Country Model Type approval* DE/AT BMW M5 (F10) e1*xx/xx*0361*.. DE/AT BMW M6 (F06) e1*xx/xx*0361*.. DE/AT BMW M6 (F12) e1*xx/xx*0361*.. DE/AT BMW M6 (F13) e1*xx/xx*0361*.. Compatible vehicles:VehicleVehicle typePower outputDisplacementEngineYear of construction BMW 5 Series (F10)M5412kW / 560PS4395ccS63 B44 B09.11 - 10.16

The Vorsteiner VRS carbon rear wing for the Audi R8 V10 provides significantly higher downforce on the rear axle and ensures an absolute racing feeling on the road. The rear wing manufactured for the Audi R8 is made of high-quality prepreg carbon fibre and features high-quality autoclave processing of the materials. The rear wing from Vorsteiner is an absolute highlight on the road, and the rear wings are a perfect fit and plug & play. Expertise: Material certificate Compatible vehicles:AUDI R8 (4S3, 4SP) 5.2 FSI quattro Since 2015AUDI R8 Spyder (4S9, 4SR) 5.2 FSI quattro Since 2017

The Competition water cooler kit is suitable for the following models:Volkswagen T6 2.0 TDI: 62-110KW/84-150hp (2016-2019)Volkswagen T6.1 2.0 TDI: 66-110KW/84-150hp (2019-)Volkswagen T6 2.0BiTDI: 146-150KW/199- 204hp (2016-2019)Volkswagen T6.1 2.0BiTDI: 146-150KW/199- 204hp (2019-) Maximum performance and optimum cooling for your VW T6/T6.1 2.0 TDI with our Competition water cooler kit. The 2.0-liter TDI engine of the VW T6/T6.1 is equipped with an indirect charge air cooling circuit, which does not cool the charge air with ambient air as usual, but with its own cooling water circuit. A reduction in the cooling water temperature leads directly to an improved cooling performance of the charge air. This is where the advantages of our Wagner Tuning Upgrade water cooler come into play. Our newly developed competition racing nets increase the radiator volume of the standard water cooler by an impressive 30%. The ratio between the inner and outer cooling surface ensures maximum heat transfer and at the same time allows sufficient airflow for adjacent components such as the engine water cooler. The increased cooling water volume means that the entire system thermal can be kept at a lower level over a longer period of time. All Wagner Tuning water coolers are equipped with a thermally conductive anti-corrosion coating that ensures a long-lasting cooling effect. Installation of the system is uncomplicated and almost plug-and-play thanks to our detailed installation instructions. Prepare your VW T6/T6.1 2.0 TDI for maximum performance and optimum cooling with our Competition water cooler kit. Dimensions OEM water cooler:714 mm x 245 mm x 54 mmV = 9.5 litersA = 1750 cm² Wagner Tuning water cooler dimensions:710 mm x 311 mm x 56 mmV = 12.4 liters (+30%)A = 2208 cm² (+26%) Scope of delivery:1x frontal water cooler black coated (low temperature circuit)1x installation instructionsAttention: Not approved in the area of the StVZO.

The Competition Intercooler Upgrade Kit is suitable for:Porsche Macan 2,0TFSI 2014-2018 (174KW/237hp)Porsche Macan 2,0TFSI 2018-2021 (180KW/245hp)Porsche Macan 2,0TFSI 2016-2018 (185KW/252hp) Unleash the true power of your Porsche Macan 2.0 TSI with the Competition Intercooler Kit Ready to take your Porsche Macan 2.0 TSI to a new level of performance? With the high-performance intercooler from Wagner Tuning, this dream becomes a reality. The figures speak for themselves: with impressive mesh dimensions of 610 mm x 440 mm x 65 mm (= 17,446L), this cooler offers an impressive 178% larger airflow area and a whopping 158% more charge air volume compared to the original. The competition high-performance mesh with internal turbulators sets new standards. And the best thing? All this power comes at a weight of just 9.1 kg. The cast aluminum end boxes are the result of CAD precision and CFD simulations for optimal internal airflow. An air guide integrated into the end box ensures even filling of the Competition high-performance mesh. With connection diameters of Ø67 mm, this kit is equipped with reinforced silicone hoses. The back pressure of this intercooler is significantly lower than that of the standard intercooler. The anti-corrosion coating with excellent heat conduction properties is the secret to long-lasting, optimum cooling and a noticeable increase in performance. This complete kit is ready to install and can be easily replaced with the standard intercooler. Perfection in every respectPressure-resistant up to 6 bar and perfectly tuned for racing, this product, like all our other products, is subject to strict quality control. Ready to take your Porsche Macan 2.0 TSI to the next level? Choose the COMPETITION CHARGE AIR COOLER KIT and feel the difference. Advantages of the Wagner Tuning intercooler:- Improved cooling performance- 178% larger inflow area- 158% more charge air volume- Connection diameter of Ø67 mm- Lower back pressure- Plug & Play Scope of delivery:1 intercooler1 air duct2 charge air hoses4 hose clamps1 mounting material1 assembly instructionsAttention: Not approved in the area of the StVZO.

Facts: Power increase (RS3 with series turbo): 15-18hp, 19-23ft-lb Power increase (RS3 with hybrid turbo): 25-30hp, 20-24ft-lb Flow dyno data: Standard intake 530 CFM: Eventuri intake 840 CFM Material: Carbon fibre Manufacturer: Eventuri Parts certificate: Approval is available for this product for certain regions and vehicles (details below) Suitable for: F3 RSQ3, RSQ3 Fastback 2019+ Originally developed for the RS3 platform, we now also offer this intake for the RSQ3. This intake system has been developed to provide the highest possible flow rate while allowing the lowest possible intake temperatures. Each component has been designed to provide the turbo with a smooth and clear flow path. The intake tube has an internal diameter of 103mm or just over 4? and has a smooth bend from the filter housing to the turbo inlet. The filter itself has been specifically designed for this inlet and has a huge outer diameter of 210mm or 8.3? with a filter area of over 130,000mm^2. The patented Venturi housing has been designed to provide the maximum possible internal volume for the RSQ3 engine bay and provides laminar flow to the turbo pipe. Finally, the duct seals the filter opening at the windscreen, but is not restricted by the standard intake alone. We have raised the front of the duct to now create an additional opening behind the bonnet, which corresponds to an additional 7? diameter hole from which the intake manifold can be removed. The resulting system has the ability to flow 840 CFM at 28? H2O while keeping intake temperatures to a minimum with the sealed design. The Eventuri difference The F3 RSQ3 Eventuri system uses our patented carbon fibre housings that provide an aerodynamically efficient airflow path from the filter to the turbocharger pipe. Not just another cone filter with a heat shield, but a unique design that creates the Venturi effect. Flow bench tests We conducted flow tests with a Superflow SF-1020 to measure the maximum possible flow rate at a pressure drop of 28" H2O. The tests were performed on the same day under controlled conditions using the same test fixture for each system. We tested our complete intake system against the stock airbox system. The results show how restrictive the stock airbox is, which we were able to improve by up to 58% in maximum possible flow rate. Importantly, this was achieved with a sealed intake system so that intake temperatures are also kept to a minimum. Testing on the test bench Our Stage 3 intake has been tested by various renowned tuners worldwide who have built high performance RS3/TTRS projects for road and track use. The first results come from BR Performance Netherlands, who tested our system on a TTRS with a TTE700 hybrid turbo. The tests were carried out on the same day with the bonnet closed. They tested the stock airbox against our stage 3 intake and also with the addition of our 4" turbo inlet pipe, which is an additional product - details can be found on our Audi product page. Summary of the Dyno results: Standard airbox with modified standard turbo inlet for TTE700 = 576.5 hp Eventuri stage 3 intake with modified standard turbo inlet for TTE700 = 606.5 hp Eventuri stage 3 intake with Eventuri turbo inlet for TTE700 = 620.8 hp Parts certificate The manufacturer's specifications apply for installation. An existing certificate is no guarantee that the product can also be installed in the corresponding vehicle. A certificate is available for this product for the following regions and vehicles: * DE/AT: Vehicle registration document, field K --- CH/LI: Vehicle licence, field 24 Country Model Type approval* DE/AT Audi RS3 e1*xx/xx*0608*06 DE/AT Audi RS3 (8V) from e1*xx/xx*0608*06 DE/AT Audi RS3 (8V) e1*2007/46*0608*08 DE/AT Audi RS3 (8Y) e1*2007/xx*2144*.. DE/AT Audi RSQ3 (F3) e1*xx/xx*2038*.. DE/AT Audi TTRS (8J) e1*xx/xx*1686*.. DE/AT Cupra Formentor VZ5 e9*xx/xx*4008*.. Compatible vehicles:VehicleVehicle typePowerEngine capacityEngine type Audi Q3 (F3) 2019+RSQ3 quattro294kW / 400hp2480cm³DAZA, DNWA