Free shipping
info@aulitzkytuning.ae
+971 50 660 4009

Competition intercooler kit | fits VAG 1.8/2.0 TSI EA888 Gen.3 Golf 7 GTI/R, S3 8V, SQ2, TTS 8S, Leon Cupra 5F, Octavia RS 5E etc. | Wagner Tuning

AED 4,472.00*

Delivery time: approx. 1-5 working days*

place a request
Product number: WT200001048
Product information "Competition intercooler kit | fits VAG 1.8/2.0 TSI EA888 Gen.3 Golf 7 GTI/R, S3 8V, SQ2, TTS 8S, Leon Cupra 5F, Octavia RS 5E etc. | Wagner Tuning"

The Wagner Tuning Competition intercooler kit for the VAG 1.8TSI - 2.0TSI engine is suitable for the following vehicles:
VW Golf 7+7.5 GTI 2,0 TSI 162-228KW/220-310hp (incl. Facelift- Performance and Clubsport[S], as well as TCR models)
VW Golf 7+7.5 R 2.0 TSI 221-228KW/300-310hp (incl. facelift models)
VW Arteon 2.0 TSI 140-206KW/190-280hp (7-speed DSG only)
VW T-Roc 2.0TSI 4Motion 140KW/190hp (not included in the parts certificate)
VW T-Roc R 4Motion 221KW/300hp (not included in the parts certificate)
Skoda Superb 3V 2,0TSI 162KW/220hp
Skoda Superb 3V 2,0TSI 206KW/280hp

With further modifications (see notes under data sheets) on the vehicle, also suitable for:
Audi Q2 40TFSI 140KW/190hp* (not included in the parts certificate)
Audi SQ2 221KW/300hp (not included in the parts certificate)
Audi A3 8V 1,8TSI 132KW/180hp*
Audi A3 8V 2,0TSI 140KW/190hp*
Audi S3 8V 2.0TSI 221-228KW/300-310hp*
Audi TT 8S 2.0TFSI 169KW / 230hp*
Audi TTS 8S 2.0TSI 228KW/310hp*
Seat Leon 5F Cupra 2,0TSI 195-272KW/265-370hp* (incl. Cupra ST 265-370 & Cupra R)
Skoda Octavia 5E 1,8TSI 132KW/180hp*
Skoda Octavia 5E RS 2.0TSI 162-180KW/220-245hp*
*The additional modifications increase the installation time to approx. 5-6 hours.

Experience top performance with the Competition intercooler kit for your VW Golf 7 GTI!

Get your VW Golf 7 GTI ready for the ultimate performance upgrade with our Competition intercooler kit. We have developed this kit to take your vehicle performance to a whole new level.

Our intercooler has impressive mesh dimensions of 640 mm x 410 mm x 65 mm, offering an increased external charge air volume of 17 liters compared to the factory 9 liters. This means more air, more power and impressive acceleration for your Golf 7 GTI.

Our specially developed competition high-performance mesh (Tube Fine) ensures optimum airflow to neighboring components such as the water cooler. Despite its size, our intercooler is surprisingly light at just 8.9 kg. The cast aluminium end boxes were created in the CAD system and optimized using CFD simulations to ensure optimal internal airflow. An integrated air duct in the end box ensures an even filling of the competition high-performance mesh.

The intercooler inlets and outlets have been enlarged to an impressive Ø 70 mm and our kit includes reinforced silicone hoses to cope with the increased airflow. Compared to the factory intercooler, our intercooler offers significantly less back pressure, resulting in improved performance. All our intercoolers are equipped with an anti-corrosion coating with excellent heat conduction properties. This guarantees long-lasting and optimum cooling performance for a constant increase in performance.

Replacing the factory intercooler with our kit is uncomplicated and can be carried out without any problems. Enjoy the benefits without costly modifications. Our products are subject to strict quality control procedures to ensure the highest standards.

Prepare to conquer the road with your Golf 7 GTI. Boost your vehicle's performance and acceleration with our Competition intercooler kit and enjoy a top-class driving experience. Give your Golf 7 GTI the performance it deserves. Get ready to dominate the road!

Advantages of the Wagner Tuning intercooler:
- improved cooling performance
- Charge air volume of 17 liters (instead of 8.9 liters OEM)
- Inlets and outlets extended to Ø 70 mm
- less back pressure
- uncomplicated replacement (plug-and-play)

Scope of delivery:
1 intercooler
2 silicone hoses
2 hose clamps
1 mounting material
1 installation instruction
1 parts certificate (OPF models excluded)

With parts certificate (OPF models excluded) for easy registration according to §19 paragraph 3 of the StVZO.

Please enter a valid email address.
Please enter a valid question.
Fields marked with * are mandatory.

There aren't any asked questions yet.
Last seen products

Last seen products

Coilover suspension ST X steel galvanized | fits A1 (GB), Polo (AW) GTI | with fixed identification | 132800BW | ST Suspensions
ST X COILOVERS The ST X coilovers allow moderate to eXtreme lowering thanks to the infinitely variable thread adjustment. Based on the know-how of KW, the market leader for individual suspension solutions, the ST X coilovers impress with their quality and driving dynamics. The ST X coilovers made by KW can be quickly and easily adjusted in the lowering level via the trapezoidal thread on the galvanized and multi-sealed spring strut. To do this, the ST polyamide threaded spring washer is turned up or down when installed. The adjustment range is different for each vehicle, for example between 35 and 65 mm on the front and rear axle of the Audi A3. On a vehicle that is already relatively low as standard, such as the BMW 3 Series (E9x), individual lowering in the range of 30 to 60 mm at the front and 25 to 55 mm at the rear can be achieved with the ST X coilover suspension. For vehicles with non-wheel-drive double wishbone rear axles, the lowering is set using the ST X coilover suspension rear axle height adjustment. A damper setup for more driving pleasureWith the damper setup used by ST Suspensions in collaboration with KW, the focus is on a sporty set-up. This reduces the typical roll and body roll movements during compression. A vehicle equipped with an ST coilover suspension responds more directly to all driving maneuvers and is significantly more agile when driving. For example, the nose of the vehicle dips less during braking maneuvers and the handling characteristics increase. The high-quality workmanship of the ST X coilovers includes a low-friction and pressure-resistant housing as well as a chrome-plated piston rod. The monoblock guide and seal package, which protects the twin-tube damper from the ingress of dirt particles, also ensures long-lasting driving pleasure. Lowering with STil: the ST X coiloversThanks to their high-quality workmanship, the balanced damper tuning and the easy adjustability of the infinitely variable lowering, the ST X coilover suspensions made by KW are the ideal coilover suspension for tuning enthusiasts: - Individual lowering within the tested adjustment range- VA and HA (if technically possible) with threaded adjustment- Galvanized coilover struts with additional sealing for optimized corrosion protection- Complete solution with adjustable spring plate, spring system and stop elements with dust protection system- High-performance 2-tube damper with high-quality components for a long service life Please note the conditions and instructions for this product:- For vehicles with factory lowering, the specified lowering rate is reduced by the amount of factory lowering Technical information:Lowering VA/HA (mm): 30-50/30-50Design: XHeight adjustment: noneMaterial: Galvanized steelAdjustment VA/HA: thread/threadApproval: Parts certificate (§19.3) Compatible vehicles:Manufacturer Model Version Body Fuel Performance Displacement Cylinder DriveAUDI A1 Sportback (GB) GBA 07/2018- 25 TFSI hatchback petrol 70 KW 999 ccm 3 front-wheel driveAUDI A1 Sportback (GB) GBA 07/2018- 30 TFSI Hatchback Petrol 81 KW 999 ccm 3 Front-wheel driveAUDI A1 Sportback (GB) GBA 07/2018- 30 TFSI Hatchback Petrol 85 KW 999 ccm 3 Front-wheel driveAUDI A1 Sportback (GB) GBA 07/2018- 35 TFSI Hatchback Petrol 110 KW 1495 ccm 4 Front-wheel driveAUDI A1 Sportback (GB) GBA 07/2018- 40 TFSI Hatchback Petrol 147 KW 1984 ccm 4 Front-wheel driveAUDI A1 Sportback (GB) GBA 07/2018- 40 TFSI hatchback Petrol 152 KW 1984 ccm 4 front-wheel driveVW POLO VI (AW, AW1, BZ1) 06/2017- 2.0 GTI Hatchback Petrol 147 KW 1984 ccm 4 front-wheel driveVW POLO VI (AW, AW1, BZ1) 06/2017- GTI Hatchback Petrol 152 KW 1984 ccm 4 Front-wheel driveSKODA SCALA (NW) 02/2019- 1.0 TSI Hatchback Petrol 70 KW 999 ccm 3 Front-wheel driveSKODA SCALA (NW) 02/2019- 1.0 TSI Hatchback Petrol 81 KW 999 ccm 3 Front-wheel drive SKODA SCALA (NW) 02/2019- 1.0 TSI Hatchback Petrol 85 KW 999 ccm 3 Front-wheel driveSKODA SCALA (NW) 02/2019- 1.5 TSI Hatchback Petrol 110 KW 1495 ccm 4 Front-wheel driveSKODA SCALA (NW) 02/2019- 1.6 TDI Hatchback Diesel 70 KW 1598 ccm 4 Front-wheel driveSKODA SCALA (NW) 02/2019- 1.6 TDI Hatchback Diesel 85 KW 1598 ccm 4 front-wheel drive 

AED 3,435.70*