Connecting rod bearing change | for BMW M5 (E39) 400hp S62

The carbon fibre front spoiler gives the front end of your vehicle a more aggressive look. Unlike regular carbon fibre, pre-preg carbon is reinforced to increase strength and durability. It can also be a staggering 70% lighter than other carbon fibre options.Prepreg carbon is far more uniform than other carbon types, meaning the likelihood of imperfections is drastically reduced. The manufacturing process eliminates unwanted air bubbles and results in a perfectly smooth and high-gloss finish. Details:- 100% pure prepreg carbon fibre construction- 3k 2x2 weave in OEM style- High gloss finish- Fit guarantee- Registration according to §21 possible Scope of delivery:- 1x Low-Line front spoiler Compatible vehicles:BMW E92 M3 Coupé (2008-2013)BMW E93 M3 Convertible (2008-2013) Note: This is NOT an original BMW product!

The ECU covers on the right and left are made of high-quality carbon fibre and give your vehicle that certain something. Details:- Constructed from 100% pure pre-preg carbon fibre- OEM style weave- High-gloss finish- Perfect fit- registration free Scope of delivery:1x set of ECU covers (1x right and 1x left) Compatible vehicles:BMW M5 G90BMW M5 G99Note: This is NOT an original BMW product!

Cold Air Intake System by BlackBoost. Precision-engineered performance upgrade for Mercedes S550 (217) M278 4.7 V8 BiTurbo Gen-2. Designed and built by BlackBoost Performance Engineering.

Facts: Power increase: 15-18 hp, 12-16ft-lb Manufacturer: Eventuri Material: Carbon fibre Parts certificate: A certificate is available for this product for certain regions and vehicles (details below) The Mercedes M139 intake manifold for the A45 and CLA45 has been developed to allow the turbo a smoother airflow. By redesigning the system to allow a much more direct path, the turbo is able to generate boost pressure with less drag and therefore reach the target boost pressure earlier in the rev range. This intake system is designed to provide the highest possible flow rate while maintaining the lowest intake temperatures to achieve a net power gain. The de-throttled flow path also allows for a more pronounced spooling of the turbo, adding to the dynamics of the overall driving experience. The Eventuri difference The Mercedes M139 Eventuri system uses our patented carbon fibre housing, which provides an aerodynamically efficient airflow path from the filter to the turbo. It's not another cone filter with a heat shield, but a unique design that creates the Venturi effect and maintains laminar flow conditions to reduce the drag of the turbo. Bench test Our M139 intake has been independently tested by a Mercedes specialised tuner in the UK - MSL Performance. Several runs were carried out with the OEM airbox to get a repeatable result and then again with the Eventuri intake. The tests were carried out back-to-back on the same day. The results show an increase in torque and power across the rev range - not just at peak revs, which is why the car feels more responsive and can accelerate faster through the gears. The Eventuri A45/CLA45 intake system consists of a number of components designed for a specific purpose and manufactured to the highest standards. We use 100% pre-impregnated carbon fibre with no glass fibre, which means we can achieve a smooth internal surface to get a smoother airflow. Below you will find the details of each component and the design philosophy behind it: Each intake system consists of: Patented carbon fibre Venturi filter housing Customised high-flow dry cone filter Carbon fibre inlet duct Laser-cut stainless steel brackets Parts certificate The manufacturer's specifications apply for installation. An existing certificate is no guarantee that the product can also be installed in the corresponding vehicle. A certificate is available for this product for the following regions and vehicles: * DE/AT: Vehicle registration document, field K --- CH/LI: Vehicle licence, field 24 Country Model Type approval* DE/AT Mercedes AMG A 45 e1*2007/46*1829*.. DE/AT Mercedes AMG A 45 S e1*2007/46*1829*.. DE/AT Mercedes AMG CLA 45 e1*2007/46*1912*.. DE/AT Mercedes AMG CLA 45 S e1*2007/46*1912*.. Compatible vehicles:VehicleTypePowerEngine capacityEngine typeYear of construction Mercedes A-Class (W177)A45 AMG 4-matic+285kW / 387hp1991cm³M 139.98007.19 - Mercedes A-Class (W177)A45 S AMG 4-matic+310kW / 421hp1991cm³M 139.98007.19 - Mercedes CLA (C118/X118)CLA45 AMG 4-matic+285kW / 387hp1991cm³M 139.98007.19 - Mercedes CLA (C118/X118)CLA45 S AMG 4-matic+310kW / 421hp1991cm³M 139.98007.19 -

Suitable for the following models:BMW F80 M3 317kW/431hpBMW F80 M3 Competition 331kW/450hpBMW F80 M3 CS 338kW/460hpBMW F82/F83 M4 317kW/431hpBMW F82/F83 M4 Competition 331kW/450hpBMW F82 M4 CS 338kW/460hpBMW F82 M4 GTS 368kW/500PS With parts certificate! The 3.0 liter S55B30 turbo engine is equipped with an indirect charge air cooling circuit. This means that the charge air is not cooled using the ambient air as a cooling medium (as usual), but with the aid of a separate cooling water circuit. A reduction in the cooling water temperature can therefore be directly equated with an improved cooling performance of the charge air. This is precisely where the advantages of the WAGNERTUNING upgrade water coolers come into play. The newly developed competition racing nets of the WAGNERTUNING high-performance water coolers increase the radiator volume of the standard water coolers by 89% for the front and 94% for the side. The ratio between the inner and outer cooling surface generates maximum heat transfer and at the same time allows the adjacent components (e.g. the engine water cooler located behind it) sufficient air flow for heat exchange. Furthermore, the increased cooling water volume allows the entire system thermal to be kept at a lower level over a longer period of time. All WAGNERTUNING water coolers are equipped with a thermally conductive anti-corrosion coating to ensure a long-lasting cooling effect. The installation of the system is also uncomplicated and plug & play with the help of our installation instructions. OEM water cooler dimensions (front):590 mm x 308 mm x 25 mmV = 4.5 litersA = 1817 cm² WT water cooler dimensions (front):568 mm x 468.4 mm x 32 mmV = 8.5 liters (+89%)A = 2660.5 cm² (+46.4%) OEM water cooler dimensions (side):250 mm x 165 mm x 40 mmV = 1.65 litersA = 412.5 cm² WT water cooler dimensions (side):252 mm x 188 mm x 68 mmV = 3.2 liters (+94%)A = 473.8 cm² (+14.9%) Scope of delivery:1x front water cooler (low-temperature circuit)1x side water cooler (low-temperature circuit)1x carbon air duct for the side water cooler1x mounting material1x installation instructions1x parts certificate With parts certificate (for easy registration according to §19 paragraph 3 of the StVZO).

Cold Air Intake System by BlackBoost. Precision-engineered performance upgrade for Mercedes AMG G63 (463A) M177 4.0L V8 BiTurbo Gen-2. Designed and built by BlackBoost Performance Engineering.