Free shipping
info@aulitzkytuning.ae
+971 50 660 4009

Downpipe kit 300cpsi E6 | fits Honda Civic Mk10 1.5 VTEC (FK7) 182hp | Wagner Tuning

AED 5,977.00*

Delivery time: approx. 1-5 working days*

place a request
Product number: WT500001029
Product information "Downpipe kit 300cpsi E6 | fits Honda Civic Mk10 1.5 VTEC (FK7) 182hp | Wagner Tuning"

The Y-pipe kit is suitable for:
Honda Civic FK7 1,5VTec Turbo 134KW/182hp (2017+)

Revolutionary Y-pipe/downpipe kit with 300CPSI racing catalytic converter for Honda Civic FK7 1,5VTec Turbo

Discover a new dimension in performance with our Y-pipe/downpipe kit, designed specifically for the Honda Civic FK7 1.5VTec Turbo. Equipped with a state-of-the-art 300CPSI racing catalytic converter, this kit sets new standards in performance and efficiency.

Technical specifications:
- Manufactured from high quality cast stainless steel 1.4301 (SS304) for exceptional durability and corrosion resistance
- Diameter before cat: 85mm, after cat: 76mm for optimized exhaust flow and maximum performance
- CAD-designed and flow-optimized for improved flow dynamics and outstanding performance
- 2 lambda probe connections ensure precise exhaust gas measurements and optimum performance
- High-quality 300CPSI racing metal catalytic converter with EU6 coating for efficient exhaust gas purification and environmental compatibility
- Includes Ø76mm downpipe for seamless integration into the exhaust system
- 100% accuracy of fit enables easy replacement with the standard part
- Reduces the thermal load on the turbocharger, resulting in a longer service life
- Increased performance by reducing back pressure and significantly more torque for an impressive driving experience

Experience the performance:
Our Y-pipe/downpipe kit with 300CPSI racing catalytic converter for the Honda Civic FK7 1.5VTec Turbo not only offers improved performance, but also an incomparable driving experience. Experience the power and dynamics of your vehicle in a completely new way.

Quality and innovation:
With our Y-pipe/downpipe kit, you can rely on quality and innovation. Discover the ultimate combination of performance, efficiency and reliability.

Disclaimer for catalytic converters
Please note that Wagner Tuning catalytic converters are intended for use on OEM vehicles for performance optimization. They are NOT intended for use in conjunction with ECU tuning. Wagner Tuning GmbH & Co. Kg. accepts no responsibility for damage caused by modifications to a vehicle, such as a tuned ECU and/or deactivation of the boost cut-off. Wagner Tuning GmbH & Co. Kg. is also not responsible for damage caused by engine malfunctions that create rich/lean conditions that are detrimental to the catalytic converter. All claims regarding a catalytic converter are subject to a warranty check. In order for a warranty to be honored, Wagner Tuning GmbH & Co. Kg. requires the purchaser to prove that the engine has been set up unchanged and in accordance with the original manufacturer's specifications and has been kept in proper working order. The end user assumes all responsibility for the legality of the use of a non-OEM catalytic converter on his vehicle for the region in which it is used.

Attention: Not approved in the area of the StVZO.

Please enter a valid email address.
Please enter a valid question.
Fields marked with * are mandatory.

There aren't any asked questions yet.
Last seen products

Last seen products

Stabilizer front + rear axle set | fits BMW M1 (E82) / M3 (E90/E92/E93) | 33039-1 | incl. approval | H&R
Made from high-strength spring steel, most H&R anti-roll bars can be adjusted on the front and rear axle. Precision-forged ends and the use of bearings made from a special composite material guarantee precise wheel guidance and reduce the vehicle's tendency to roll. Can be combined with all commercially available standard or sports suspensions. Brief description: - Installation location front axle: Ø 27 mm, not adjustable - Installation location rear axle: Ø 23 mm - with parts certificate - Please note the information! - Illustration may differ from the original The product benefits at a glance: - Reduced rolling tendency of the vehicle - Better handling due to reduced body roll - Partially multi-adjustable - Minimal loss of comfort - Under- or oversteer are reduced or changed - Can be installed with standard or sports suspension - High-strength special spring steel - Bearings made from special composite material - In-house development and production in Germany - With parts certificate Note 55: When installing the H&R stabilisers, the standard add-on parts must also be used, unless otherwise supplied by H&R. It must be ensured that the original parts to be used are in perfect condition; if necessary, these parts must be replaced. Note 60: With this stabiliser bar set, the VA stabiliser bar can also be installed separately (without the HA stabiliser bar) and is TÜV-approved. However, if only the front stabiliser bar is installed separately, the vehicle may tend to understeer. Usage numbers: 33039-1, 330391 Compatible vehicles: - BMW 1 Series Coupe (E82) M (250 kW, 340 hp) - BMW 3 Series (E90) M3 (309 kW, 420 hp) - BMW 3 Series Convertible (E93) M3 (309 kW, 420 hp) - BMW 3 Series Coupe (E92) M3 (309 kW, 420 hp)

AED 2,709.00*
Rear spoiler Evo-Style Carbon | fits BMW M4 incl. Competition (F82/F83) S55 | Vorsteiner
The Vorsteiner EVO carbon rear spoiler for the F82 creates a striking look at the rear.Its larger surface area generates more downforce on the rear axle. Made from autoclaved prepreg carbon.Expert opinion: Material certificate Compatible vehicles:BMW 4 Convertible (F33, F83) M4 2014-2020BMW 4 Convertible (F33, F83) M4 Competition 2016-2020BMW 4 Coupe (F32, F82) M4 2014-2020BMW 4 Coupe (F32, F82) M4 Competition 2016-2020

AED 7,158.68*