Free shipping
info@aulitzkytuning.ae
+971 50 660 4009

Intake system Carbon | fits Mercedes-Benz C63/S AMG (W205) | Eventuri

AED 14,147.00*

Delivery time: approx. 2-6 weeks. Exact delivery time on request*.

Variant
This field is a required field.
This field is a required field.
Product number: EV5195-EV5520
Product information "Intake system Carbon | fits Mercedes-Benz C63/S AMG (W205) | Eventuri"

Facts:
35% more airflow
Up to 30 hp power increase
84% larger air intake
Full carbon fibre look
High-flow panel filter
Manufacturer: Eventuri
Material: Carbon
Parts certificate: A certificate is available for this product for certain regions and vehicles (details below)

The Mercedes W205 C63/S AMG intake system is the culmination of extensive development and testing. Our design consisted of 3 main objectives:
1) Increased flow
2) Low inlet temperatures
3) Smooth airflow
The first objective was achieved by utilising all the limited space in the engine bay of the C63S, resulting in a 35% higher flow rate compared to the original system. The second goal was achieved by developing a fully enclosed system. The C63S engine bay reaches high temperatures with heat sources such as the turbos in close proximity to the intake system, so it is critical that the intake system remains sealed. The end goal was achieved by designing an organically moulded system with individual rounded panel filters to ensure the airflow path contained no sharp corners, keeping the flow laminar. With smooth transitions from the filters to the turbo inlets, our intake system minimises the creation of turbulence, allowing the turbos to operate more efficiently.When all 3 objectives are achieved, our intake system for the W205 C63(S) delivers on all fronts and allows the turbos to generate boost more efficiently. This leads to improved throttle response and real power gains, which increase the more power the engine has.

As there are various turbo upgrades available for the C63/S, we have also developed a special solution for larger turbos.
Our C63/S intake is available in 2 configurations:
61 mm ID outlets to fit standard turbos and 76.5 mm ID outlets to fit larger turbos.

Power increase: Stage 2 C63S: 22-30hp, 20-24ft-lb
Power increase: Original C63S: 10-12hp, 12-15ft-lb

Dyno tests were performed on both a full C63S and a Stage 2 C63S with downpipes and software optimisation. Below is the dyno chart for the Stage 2 car that had the same tune for all runs and only the airbox was changed. It is important to note that the bonnet was closed for all runs to simulate road conditions. Dyno tests with the bonnet open - especially with open conical intakes - do not give a reliable indication of how the intake system affects performance. On the road, the bonnet is closed and so all the heat from the turbos is retained in the engine bay. On the C63S, this intense heat is a problem, which is why a closed system is so important. As the higher air temperature is less dense, the turbos don't make as much pressure, resulting in lower power.Here, our fully sealed system shows that power increases linearly after 4800 rpm, where the airflow requirement increases and the original airboxes become a restriction. These power gains were measured after only the original airbox was swapped for the Eventuri intake system - all other changes were present for both the original airbox and the Eventuri intake system.The gains measured on the dyno translate to increased part-throttle and full-throttle response on the road, with the car pulling much more eagerly to redline. Testing was conducted back-to-back on the same day and temperatures were monitored to ensure consistency. The car was first tested with the bonnet closed. We then left the car on the dyno and installed the Eventuri. The car was then driven again - bonnet closed. Several runs were carried out with both configurations to achieve a consistent result.

Parts certificate
The manufacturer's specifications apply to the installation. An existing certificate is no guarantee that the product can also be installed in the corresponding vehicle.

A certificate is available for this product for the following regions and vehicles:
* DE/AT: Vehicle registration document, field K --- CH/LI: Vehicle licence, field 24
Country Model Type approval*
DE/AT AMG C 63 e1*2001/116*0431*..
DE/AT AMG C 63 e1*2001/116*0457*..
DE/AT AMG C 63 e1*2001/116*0463*..
DE/AT AMG C 63 e1*2001/116*0464*..
DE/AT AMG C 63 S e1*2001/116*0431*..
DE/AT AMG C 63 S e1*2001/116*0457*..
DE/AT AMG C 63 S e1*2001/116*0463*..
DE/AT AMG C 63 S e1*2001/116*0464*..

Compatible vehicles:

Vehicle
Vehicle type
Power
Engine capacityEngine typeYear of construction
Mercedes C-Class (W205)
C63 AMG
350kW / 476hp3982cm³M 177.980
10.14 -
Mercedes C-Class (W205)
C63 S AMG
375kW / 510hp3982cm³
M 177.980
10.14 -

Please enter a valid email address.
Please enter a valid question.
Fields marked with * are mandatory.

There aren't any asked questions yet.
Last seen products

Last seen products

Shift paddles aluminium silver | fits BMW F-Series | PaddleShifterz
These PaddleShifterz aluminium paddle shifters fit the F-series steering wheel. They are a complete replacement for the OEM paddle shifters in your vehicle. They are finished in silver and take the look of your vehicle interior to the next level. The paddle shifters are 155% larger than the OEM paddle shifters and offer more shifting range for a better daily drive or for track days like on the Nordschleife (Nürburgring). These paddle shifters have been designed with ease of use as the main focus. Not only should they look fantastic, but you should be able to shift through the gears with them from any angle. They are a direct replacement for the original paddle shifters, no additional glue or screws are required.Simply remove the original part and insert the new paddle shifters - it's easy! Scope of delivery:- 2x paddle shifters (left and right) in silver (powder-coated)- Made from 6061-grade aircraft aluminium, CNC-milled- +/- removed by CNC machine Compatible vehicles:BMW 1 Series F20/F21BMW 2 Series F22/F23BMW 2 Series F45BMW 2 Series F87BMW 3 Series F30/F31BMW 3 Series F34BMW 3 Series F80BMW 4 Series F32/F33BMW 4 Series F82/83BMW 5 Series F07/F10/F11BMW 6 Series F06/F12/F13BMW i8BMW X1 F48 (from 2015)BMW X3 F25BMW X4 F26BMW X5 F15BMW X5 F85BMW X6 F16BMW X6 F86

AED 1,070.70*
Competition Gen.2 Intercooler Kit | fits Hyundai i30 III (PD) N Performance Facelift 280hp | Wagner Tuning
The Wagner Tuning Competition Gen.2 intercooler kit fits the following model:Hyundai I30 N Performance 206KW/280PS (2021+) Experience the ultimate performance boost for your Hyundai i30 N with the impressive Wagner Tuning high performance intercooler. Specially developed to meet the demanding requirements of the Hyundai i30 N, this intercooler is equipped with a new type of competition mesh (Tube Fin), which impresses with its dimensions of 580 mm x 150 mm x 135.4 mm + 580 mm x 62 mm x 70 mm (stepped mesh: 14.3 litres). With a 44.3 % larger inflow area and 101.4 % larger mesh volume compared to the original intercooler, this high-performance mesh offers unrivalled performance. The high-quality cast aluminium end boxes have been CAD designed and optimised using CFD simulations to ensure ideal internal airflow. The result is outstanding cooling properties with minimal back pressure. In addition, the innovative high-performance mesh enables sufficient airflow to neighbouring components such as the water cooler through the use of a specially manufactured air baffle. This kit is therefore perfect for racing and offers optimum cooling of the supercharged air with a significant increase in performance. With an anti-corrosion coating, which has outstanding heat conduction properties, the Wagner Tuning intercoolers are optimally protected against environmental influences and offer a long-lasting and efficient cooling effect. Installation is effortless at the original mounting points and is easy to carry out thanks to the plug-and-play system. Like all our products, this intercooler is also subject to strict quality control. With an inlet and outlet diameter of Ø65mm, this intercooler enables optimum flow and contributes to an impressive increase in performance for your Hyundai i30 N. Take your vehicle to a new level and experience the full power that this high-performance intercooler offers. Boost your performance and dominate the road like never before. Advantages of the Wagner Tuning intercooler:- improved cooling performance- 44.3% larger flow area- 104.4% more net volume- Minimal back pressure- Inlet and outlet diameter of Ø65mm- Plug & Play OEM intercooler:V = 7.1 LITRESA = 79360 mm² Wagner Tuning intercooler:V = 14.3 LA = 114492 mm²G = 9.3kg Scope of delivery:1 intercooler2 silicone hoses1 air baffle1 mounting material1 installation instruction Attention: Not authorised in the area of the StVZO.

AED 3,913.00*
Fender replacement element Carbon | fits BMW M2 (F87) N55 | Aulitzky Tuning
The fender elements made of pre-preg carbon fiber perfectly emphasize the style of the vehicle.Details:- 100% pure pre-preg carbon fibre construction- OEM style carbon fibre- High gloss finish- Perfect fit- Registration free Compatible vehicles:- BMW F87 2 Series M2/Competition Note: This is NOT an original BMW product!

AED 1,414.70*
Tip
Rear lights OLED optics | fits BMW M3 incl. Competition/CS (G20/G80) | Aulitzky Tuning
The rear lights in OLED optics with 3D effect make it possible to achieve a new three-dimensional and at the same time very sharply defined appearance. They are also an ideal change from the factory-fitted rear lights. - Approved in the area of the StVZO by E-mark (registration-free) - Service life of up to 50,000 hours. - The rear lights are waterproof and extremely durable. Suitable for the following models: BMW G20 saloon BMW G80 M3 saloon For installation: The rear lights are plug & play. No coding is necessary. Scope of delivery: 1x set of rear lights (left + right) Note: This is NOT an original BMW product!

AED 2,790.70*
Headlight inlet Racelamp Duct for intake system STAGE 3 | fits Audi RS3 (8V)/ TTRS (8S) 400hp | Eventuri
Eventuri headlight intake Racelamp Duct for Stage3 RS3 8V Eventuri. FITS ONLY WITH ORIGINAL EVENTURI CARBON INTAKE STAGE3 FOR AUDI RS3/TTRS 8V/8S FACELIFT. Not suitable for road use. Compatible vehicles:VehicleTypePowerEngine capacityEngine type Audi A3 (8V)RS3 quattro294kW / 400hp2480cm³DAZA, DNWA Audi TT (8J1/8S)TTRS quattro294kW / 400hp2480cm³DAZA, DNWA

AED 4,226.90*