Free shipping
info@aulitzkytuning.ae
+971 50 660 4009

KW V1 coilover suspension inox | fits Ford Focus Mk2 (DA) 2.5 RS RS500 | 10230054

AED 0.00*

Delivery time: Availability on request at Aulitzky Tuning*

Optional: Installation on site at Aulitzky Tuning

- Installation and removal of coilover suspension
- Wheel camber correction kit
- Wheel alignment
- Calibration of assistance systems/lights
- Individual suspension tuning according to customer requirements
- Individual test drive and adjustment together with the customer

Assembly at location DE-91564 Neuendettelsau
Reset choice
AED 0.00*
Product number: KW10230054
Product information "KW V1 coilover suspension inox | fits Ford Focus Mk2 (DA) 2.5 RS RS500 | 10230054"

KW V1 coilover suspension

Sportiness paired with outstanding looks. With factory pre-configured damping.
Our entry-level model for more driving pleasure through an appealing and individually adjustable lowering is the KW V1 coilover suspension in the KW typical "inox-line". Thanks to its high-quality workmanship, the consistent use of stainless steel struts, corrosion-resistant springs and harmonised components, it stands for many years of driving pleasure - and not just for the life of the car.

Stepless lowering
The KW V1 enables maximum lowering within the tested adjustment range. This varies depending on the vehicle model and can, for example, be between 30 and 70 millimetres or 50 to 90 millimetres for an individual lowering. Thanks to the dirt-resistant trapezoidal thread and the polyamide threaded ring, the stepless lowering can be varied quickly and easily even years later. Depending on the vehicle, the lowering is carried out either on the wheel-guiding KW stainless steel suspension struts or on the rear axle height adjustment for non-wheel-guiding double-wishbone rear axles.

The benchmark for sporty, dynamic tuning fans
With its harmonious basic set-up for sporty driving on the road, the KW V1 convinces the discerning tuning fan. Our development engineers determine a specific damper set-up and spring rate for each vehicle in order to increase your driving pleasure with the optimum balance of sportiness and suitability for everyday use. After all, you are not buying just any coilover suspension, but a KW coilover suspension that has been specially developed and tuned for your vehicle type. As a manufacturer, KW only uses its own resources, high-quality components and the same damper technology as mass-produced manufacturers. With the KW V1, the rolling and rolling movements of the vehicle body are reduced during compression, allowing you to benefit from unadulterated directness and sportier handling when driving.

Our experience for your driving pleasure
As a manufacturer of customised suspension solutions for road and racing, we have been the market leader and innovation driver for over 25 years. No matter where in the world, sporty drivers, car manufacturers and tuners rely on our KW coilovers "Made in Germany". Every KW coilover suspension is subjected to extensive load tests during production and is developed and manufactured directly at our company headquarters in Fichtenberg, Swabia, in order to fulfil the high standards of our KW quality management. As a German manufacturer, it is a matter of course for us to provide a multi-year warranty on our KW coilover suspension kits, which exceed OEM quality and cover over 4,600 applications. When installed by one of our KW specialist dealers, this warranty is valid for up to five years.

- Optimally adjusted in advance
- sporty and harmonious damping technology
- Stainless steel technology "inox-line"
- Individually height-adjustable
- Tested adjustment range
- Ready-to-install complete solution
- High-quality components for a long service life
- Complete documentation for easy handling

Setup - factory pre-configured damping setup
The KW V1 has a vehicle-specific, permanently configured damper setup. The spring and the damper are perfectly matched to each other so that you experience an optimum balance of sportiness and suitability for everyday use when driving.

Even with a full payload and maximum axle loads, the dampers always work with a sporty characteristic curve. The KW V1 is particularly interesting for tuning enthusiasts who prioritise the show & shine concept.

Please note the conditions and instructions for this product:
- VA + HA height-adjustable (VA coilover struts, HA springs with height adjustment + damper)

Technical info:
Lowering VA/HA (mm): 25-50/20-45
Version: V1
Hardness adjustment: none
Material: stainless steel
Adjustment VA/HA: thread/thread
Approval: parts certificate (§19.3)

Compatible vehicles:
Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive
FORD FOCUS II (DA_) 07/2004-09/2013 2.5 RS Hatchback Petrol 224 KW 2521 ccm 5 Front-wheel drive
FORD FOCUS II (DA_) 07/2004-09/2013 2.5 RS 500 Hatchback Petrol 257 KW 2521 ccm 5 Front-wheel drive

Please enter a valid email address.
Please enter a valid question.
Fields marked with * are mandatory.

There aren't any asked questions yet.
Last seen products

Last seen products

Silicone hose kit | fits VAG 2.0TSI EA888 Gen.4 VW Golf 8 GTI/CS/ED45 | Wagner Tuning
Suitable for the following models:VW Golf VIII Type CD 2.0 GTI 180kW / 245PS (from 08/2020 MKB: DNPA)VW Golf VIII Type CD 2.0 GTI Clubsport/ED45 220KW/300PS (from 10/2020 MKB: DNFC) Optimise the performance and reliability of your VW Golf 8 GTI 2.0TSI with our high-quality silicone hose kit, specially developed for the EA888 Gen.4 engine. This kit provides a direct replacement for the stock hoses and ensures improved airflow for optimised performance. High quality materials:Made from high quality silicone for maximum durability and reliability. Precise fit:The hoses are precisely matched to the requirements of the EA888 Gen.4 engine to ensure a perfect fit and optimum performance. Improved airflow:Improved airflow increases engine performance and optimises engine response. Easy installation: Installation is straightforward and requires no special tools. Simply replace the standard hoses with the new silicone hoses and secure with the hose clamps provided. Compatibility:This hose kit is only compatible with the original Wagner Tuning intercooler. Note: Please note that the article image is for illustrative purposes only and the actual product may differ slightly. Scope of delivery:2 silicone hoses4 hose clamps

AED 1,806.00*
Rear spoiler Ducktail V-Style Carbon | fits BMW M2/M240i/2 Series (G87/G42) | Aulitzky Tuning
The G87 and G42 V-Style Ducktail rear spoiler made of pre-preg carbon fibre gives your vehicle an enormous amount of aggression and presence on the road. The rear spoiler is very pronounced and corresponds to the modern design.Details:- Constructed from 100% pure pre-preg carbon fibre- OEM style fabric- High-gloss finish- Ducktail design- Perfect fit- Supplied with pre-mounted double-sided 3M adhesive tape- incl. required mounting accessories- With parts certificate according to §19.3 Compatible vehicles:- BMW G87 2 Series M2 (2023+)- BMW G42 2 Series M240i Coupe (2022+)- BMW G42 2 Series Coupe (2022+)Note: This is NOT an original BMW product!

AED 1,586.70*
Side skirts SOOQOO Carbon | fits BMW X3M/X4M incl. Competition (F97/F98) LCI S58 | Aulitzky Tuning
Experience the fascinating world of the carbon side sill customised for the F97/F98. This was developed to give your vehicle a unique look.Unlike normal carbon fibre, pre-preg carbon is reinforced to increase strength and durability. It can also be a staggering 70% lighter than other carbon fibre options.Prepreg carbon is far more uniform than other carbon types, meaning the likelihood of imperfections is drastically reduced. The manufacturing process eliminates unwanted air bubbles and results in a perfectly smooth and high-gloss finish. Details:- 100% pure prepreg carbon fibre construction- OEM-style weave- High gloss finish- Fit guarantee- Registration according to §21 possible Scope of delivery:- 1x SOOQOO side skirts Compatible vehicles:BMW X3M/ Competition (F97) FaceliftBMW X4M/ Competition (F98) Facelift Note: This is NOT an original BMW product!

AED 6,445.70*
Canards Performance Carbon | fits BMW M3/M4 (G80/G81/G82/G83) S58 | Aulitzky Tuning
The high-quality carbon fibre front canards are a perfect addition to significantly enhance the style of your vehicle. Unlike regular carbon fibre, pre-preg carbon is reinforced to increase strength and durability. It can also be a staggering 70% lighter than other carbon fibre options.Prepreg carbon is far more uniform than other types of carbon, meaning the likelihood of imperfections is drastically reduced. The manufacturing process eliminates unwanted air bubbles and results in a perfectly smooth and high-gloss finish. Details:- 100% pure prepreg carbon fibre construction- OEM-style weave- High gloss finish- Fit guarantee- With parts certificate according to §19.3 Scope of delivery:- 1x Performance carbon canards Compatible vehicles: BMW G80 M3 Limousine (2021+) BMW G80 M3 Competition Limousine (2021+) BMW G81 M3 Touring (2023+) BMW G81 M3 Competition Touring (2023+) BMW G82 M4 Coupe (2021+) BMW G82 M4 Competition Coupé (2021+) BMW G83 M4 Cabrio (2021+) BMW G83 M4 Competition Cabrio (2021+)  Note: This is NOT an original BMW product!

AED 1,500.70*
KW V3 Clubsport coilover suspension | fits BMW M3/M4 (F80/F82) incl. Competition/CS | 397202AN
KW V3 Clubsport coilover suspension incl. support bearings With an uncompromising technology transfer from racing to the road, the KW Clubsport coilovers convince. The KW Clubsport coilovers convince with their uncompromising combination of high-end racing technology with maintenance-free KW original equipment components and expertises. This gives you the ideal accessories to realise the full potential of your sports car at trackdays, sports driver training courses, tourist drives on Grand Prix circuits and on the Nürburgring Nordschleife. Developed for the toughest racetrack in the world: the Nürburgring Nordschleife Even in their basic set-up, KW Clubsport coilovers are tuned to the different track surfaces, steep bends, jumps and chicanes of the 20.8 kilometre long Nürburgring Nordschleife. After all, as one of the most successful suspension manufacturers and suppliers in motorsport, we are at home on the Nordschleife. In the VLN Endurance Championship alone, we equip over 70 racing teams and, as a suspension manufacturer, have supported six overall victories at the ADAC Zurich 24h Race Nürburgring in ten years. The winner of the ADAC GT Masters 2011 also relies on our racing expertise, from which the KW Clubsport coilovers benefit. The basic setup of the KW V3 Clubsport and KW V4 Clubsport with separate expansion tank, which is perfectly adapted to the Nordschleife, allows you to adjust your sports car even more individually to the desired sports tyre setup thanks to the numerous adjustment options. In addition to optionally available adjustable support bearings, you can adjust the damping forces of the KW Clubsport coilovers independently in the rebound and compression stages with the integrated KW V3 Clubsport coilover suspension technology like in racing With the adjustment wheels for the rebound adjustment, you can fine-tune the recommended basic setup for your sports car and your individually installed performance components with 16 exact clicks. This allows you to directly influence changed wheel loads, for example to influence bodywork movements. Separate from the rebound adjustment, the KW V3 Clubsport allows you to adjust the compression damping with twelve exact clicks in the low-speed range to your requirements, such as the sports tyres used. These setting options allow you to consider individual setups to suit the vehicle weight, sports tyre characteristics, track characteristics and operating conditions. - Freely adjustable damping technology in rebound and compression damping - Stainless steel technology "inox-line" - Stepless lowering - Tested adjustment range - high-quality components for a long service life - Adjustable rebound damping with 16 exact clicks - Adjustable compression damping with 12 exact clicks - Unique, independently acting damping force adjustment - optionally available with aluminium Unibal support bearing. Setup: Application range and damper tuning The KW V3 Clubsport coilover suspensions impress with their vehicle-specific setup for trackday events on the Nürburgring Nordschleife, as well as the possibility of quickly tuning these suspensions for other racetracks and individual performance sports cars. Please note the conditions and instructions for this product: - VA + HA height-adjustable (VA coilover struts, HA springs with height adjustment + dampers) - When used with standard wheel/tyre combinations, additional commercially available track wideners from the accessories may be required - For vehicles with electronic damper control, this must be deactivated. Vehicle-specific KW decommissioning kits can be found in the accessories table. - The dampers have easy-to-operate adjustment wheels. Due to the design, the rebound damping can only be adjusted when the piston rod is accessible. - Clubsport suspension with support bearing: only available with VA support bearing Technical information: Lowering VA/HA (mm): 10-35/10-35 Version: V3 Clubsport Height adjustment: Rebound and compression damping Material: Stainless steel Adjustment VA/HA: thread/thread Approval: Parts certificate (§19.3) Compatible vehicles: BMW 3 Series (F30, F80) 3-HY, 3L, M3, M3 GTS 03/2011-10/2018 M3 notchbackPetrol 317 KW 2979 ccm 6 Rear-wheel drive BMW 3 Series (F30, F80) 3-HY, 3L, M3, M3 GTS 03/2011-10/2018 M3 CompetitionNotchback petrol 331 KW 2979 ccm 6 rear-wheel drive BMW 3 Series (F30, F80) 3-HY, 3L, M3, M3 GTS 03/2011-10/2018 M3 CS notchbackPetrol 338 KW 2979 ccm 6 rear-wheel drive BMW 4 Series Coupe (F32, F82) 3C, M3, M3 GTS 07/2013- M4 CoupePetrol 317 KW 2979 ccm 6 rear-wheel drive BMW 4 Series Coupe (F32, F82) 3C, M3, M3 GTS 07/2013- M4 Competition CoupePetrol 331 KW 2979 ccm 6 rear-wheel drive BMW 4 Series Coupe (F32, F82) 3C, M3, M3 GTS 07/2013- M4 CS CoupePetrol 338 KW 2979 ccm 6 rear-wheel drive

AED 16,338.58*