Free shipping
info@aulitzkytuning.ae
+971 50 660 4009

KW V1 coilover suspension inox | fits Mercedes-Benz C63 AMG (W204) | 10225033

AED 0.00*

Delivery time: Availability on request at Aulitzky Tuning*

Optional: Installation on site at Aulitzky Tuning

- Installation and removal of coilover suspension
- Wheel camber correction kit
- Wheel alignment
- Calibration of assistance systems/lights
- Individual suspension tuning according to customer requirements
- Individual test drive and adjustment together with the customer

Assembly at location DE-91564 Neuendettelsau
Reset choice
AED 0.00*
Product number: KW10225033
Product information "KW V1 coilover suspension inox | fits Mercedes-Benz C63 AMG (W204) | 10225033"

KW V1 coilover suspension

Sportiness paired with outstanding looks. With factory pre-configured damping.
Our entry-level model for more driving pleasure through an appealing and individually adjustable lowering is the KW V1 coilover suspension in the KW typical "inox-line". Thanks to its high-quality workmanship, the consistent use of stainless steel struts, corrosion-resistant springs and harmonised components, it stands for many years of driving pleasure - and not just for the life of the car.

Stepless lowering
The KW V1 enables maximum lowering within the tested adjustment range. This varies depending on the vehicle model and can, for example, be between 30 and 70 millimetres or 50 to 90 millimetres for an individual lowering. Thanks to the dirt-resistant trapezoidal thread and the polyamide threaded ring, the stepless lowering can be varied quickly and easily even years later. Depending on the vehicle, the lowering is carried out either on the wheel-guiding KW stainless steel suspension struts or on the rear axle height adjustment for non-wheel-guiding double-wishbone rear axles.

The benchmark for sporty, dynamic tuning fans
With its harmonious basic set-up for sporty driving on the road, the KW V1 convinces the discerning tuning fan. Our development engineers determine a specific damper set-up and spring rate for each vehicle in order to increase your driving pleasure with the optimum balance of sportiness and suitability for everyday use. After all, you are not buying just any coilover suspension, but a KW coilover suspension that has been specially developed and tuned for your vehicle type. As a manufacturer, KW only uses its own resources, high-quality components and the same damper technology as mass-produced manufacturers. With the KW V1, the rolling and rolling movements of the vehicle body are reduced during compression, allowing you to benefit from unadulterated directness and sportier handling when driving.

Our experience for your driving pleasure
As a manufacturer of customised suspension solutions for road and racing, we have been the market leader and innovation driver for over 25 years. No matter where in the world, sporty drivers, car manufacturers and tuners rely on our KW coilovers "Made in Germany". Every KW coilover suspension is subjected to extensive load tests during production and is developed and manufactured directly at our company headquarters in Fichtenberg, Swabia, in order to fulfil the high standards of our KW quality management. As a German manufacturer, it is a matter of course for us to provide a multi-year warranty on our KW coilover suspension kits, which exceed OEM quality and cover over 4,600 applications. When installed by one of our KW specialist dealers, the warranty is up to five years.

- Optimally adjusted in advance
- sporty and harmonious damping technology
- Stainless steel technology "inox-line"
- Individually height-adjustable
- Tested adjustment range
- Ready-to-install complete solution
- High-quality components for a long service life
- Complete documentation for easy handling

Setup - factory pre-configured damping setup
The KW V1 has a vehicle-specific, permanently configured damper setup. The spring and damper are perfectly matched to each other so that you experience an optimum balance of sportiness and suitability for everyday use when driving.

Even with a full payload and maximum axle loads, the dampers always work with a sporty characteristic curve. It is interesting to note that the KW V1 is particularly popular with tuning enthusiasts who prioritise the idea of show & shine.

Please note the conditions and instructions for this product:
- VA + HA height-adjustable (VA coilover struts, HA springs with height adjustment + damper)

Technical information:
Lowering VA/HA (mm): 5-30/0-30
Version: V1
Hardness adjustment: none
Material: Stainless steel
Adjustment VA/HA: thread/thread
Approval: Parts certificate (§19.3)

Compatible vehicles:
Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive
MERCEDES-BENZ C-CLASS (W204) 204, 204 AMG, 204K 01/2007-01/2015 C 63 AMG (204.077) Notchback Petrol 336 KW 6208 ccm 8 Rear-wheel drive
MERCEDES-BENZ C-CLASS (W204) 204, 204 AMG, 204K 01/2007-01/2015 C 63 AMG (204.077) Notchback Petrol 358 KW 6208 ccm 8 Rear-wheel drive
MERCEDES-BENZ C-CLASS (W204) 204, 204 AMG, 204K 01/2007-01/2015 C 63 AMG (204.077) Notchback Petrol 373 KW 6208 ccm 8 Rear-wheel drive

Please enter a valid email address.
Please enter a valid question.
Fields marked with * are mandatory.

There aren't any asked questions yet.
Last seen products

Last seen products

Competition intercooler kit EVO 1 | fits Audi RS3 (8V/8Y), TTRS (8S), RSQ3 (F3) 2.5 TFSI | Wagner Tuning
The Wagner Tuning Competition Intercooler Kit EVO 1 for Audi RS3 8V / 8Y and TTRS 8S is suitable for:Audi RS3 8V Sportback 270KW/367PS 04/2015-04/2016Audi RS3 8V Sportback/Sedan 294KW/400PS 08/2017+Audi RS3 8Y Sportback/Sedan 294KW/400PS 2021+Audi TTRS 8S 294KW/400PS 11/2016+Audi RSQ3 F3 294KW/400PS 10/2019+Ready to give your Audi RS3 8V an impressive performance boost? The Competition high performance intercooler kit EVO1 is the answer you've been waiting for. With state-of-the-art technology and a customised design, this kit ensures an exciting driving experience. This high performance intercooler redefines performance. With mesh dimensions of 660mmx180mmx110mm and a mesh volume of 13,070 cm³, it offers an impressive 14% larger flow area and an astonishing 57% more charge air volume compared to the standard intercooler. The result? An explosive increase in performance and exceptional cooling capacity. Our intercooler is equipped with a high-quality Tube Fin mesh that uses internal turbulators to optimise airflow. Despite its impressive size, this cooler weighs just 8.3kg, meaning you get more power without the extra weight. Our cast aluminium end boxes were developed in the CAD system and optimised with flow analyses in the CFD system to perfect the internal airflow. The result is excellent cooling properties with minimal back pressure. Our kit is a completely ready-to-install package that allows for easy replacement of the standard intercooler - a true plug-and-play experience. No complex adjustments required. All our intercoolers are equipped with an anti-corrosion coating that not only protects against environmental influences, but also offers excellent heat conduction properties. This ensures constant and optimum cooling performance, accompanied by a significant increase in performance. Our product has been tested to withstand pressures of up to 6 bar in order to offer you reliability at the highest level. Quality is our top priority. All our products are subject to rigorous quality control to ensure they meet the highest standards. Designed specifically for racing, this kit offers the performance and reliability you need to excel on the track. Realise your performance dreams with the Competition high performance intercooler kit EVO1. Get the most out of your Audi RS3 8V now and experience a new dimension of driving pleasure! Advantages of the Wagner Tuning intercooler:- improved cooling performance- 14 % larger inflow area- 57 % more charge air volume- flow-optimised- Plug & Play Dimensions original intercooler:640mm x 163mm x 80mmV=8.3 litresA=1043 cm² Wagner Tuning intercooler dimensions:660mm x 180mm x 110mmV=13.07 litresA=1188 cm² Scope of delivery:1 intercooler (black coated)1 assembly instruction Attention: Not authorised in the area of the StVZO.

AED 4,386.00*
%
Lowering springs Pro-Kit Performance VA+HA 30mm | fits BMW 3 Series M340d/330d xDrive Mild-Hybrid (G21) | Eibach
Eibach Pro-Kit performance suspension springs for front and rear axle E10-20-045-07-22 The Eibach Pro-Kit lowering springs are the ideal solution for your vehicle, as the kit lowers the centre of gravity, reduces rebound when accelerating, reduces body roll when cornering and dips when braking. As a result, understeer and oversteer no longer occur. Lowering the vehicle with the Pro-Kit springs reduces the standard distance between the tyres and the wheel arch and gives the vehicle a sporty look. In addition, the handling of the vehicle is maximised. The Eibach Pro-Kits are designed by Eibach suspension engineers and test experts to deliver a combination of sporty looks and performance without compromising on safety or ride quality. - Developed and tested for combination with standard and aftermarket dampers- Component of the Eibach Pro system- Top performance handling- Lowers the vehicle's centre of gravity by up to 40 mm (depending on the vehicle)- Spring design for traction and attraction- Progressive suspension characteristics- Performance handling- ABE or parts certificate Note: Only for vehicles without levelling control. Information:- Lowering front axle: approx. 30mm- Lowering rear axle: approx. 25mm- Type of approval: with expert opinion- Suspension: for all standard damping systems- Illustration may differ from the original Compatible vehicles:- Axle load front axle: up to 1170kg- Axle load rear axle: up to 1410kg- EC type approval number: e1*2007/46*2017*..- Only for vehicles without levelling system BMW 3 Series Touring (G21) year of construction 07.19- 330d xDrive Mild HybridBMW 3 Series Touring (G21) Year of construction 07.19- M340d xDrive Mild Hybrid

AED 1,496.40* AED 1,780.72* (15.97% saved)
Entry sill surround cover Carbon | fits BMW M2 (G87) S58 | Aulitzky Tuning
The high-quality carbon sill surround covers are an excellent addition to significantly enhance the style of your vehicle. Unlike regular carbon fibre, pre-preg carbon is reinforced to increase strength and durability. It can also be a staggering 70% lighter than other carbon fibre options.Prepreg carbon is far more uniform than other types of carbon, meaning the likelihood of imperfections is drastically reduced. The manufacturing process eliminates unwanted air bubbles and results in a perfectly smooth and high-gloss finish. Details:- 100% pure prepreg carbon fibre construction- OEM-style weave- High gloss finish- Fit guarantee- Registration free Scope of delivery:- 1x carbon Entry sill surround cover Compatible vehicles:BMW G87 M2 Note: This is NOT an original BMW product!

AED 1,715.70*
Seat shell cover Carbon | fits BMW M2/M3/M4 (F87/F80/F81/F82/F83) N55/S55 | Aulitzky Tuning
The Seat shell cover made of pre-preg carbon fiber perfectly emphasize the style of the vehicle.Details:- 100% pure pre-preg carbon fibre construction- OEM style carbon fibre- High gloss finish- Perfect fit- Registration free Compatible vehicles:- BMW FSeries Note: This is NOT an original BMW product!

AED 1,801.70*
KW DDC P&P coilover suspension | fits Mercedes-Benz G63 AMG/ G500 (W463) | 39025028
KW coilover suspension DDC "Plug & Play" The "Plug & Play" solution for vehicles with standard electronic damper adjustment. KW also offers you the possibility to combine the active standard damper control of your sporty vehicle with the stainless steel KW DDC Plug & Play coilover suspension. This means that you can continue to use the existing active damper control in your car such as the VW Scirocco, VW Golf VI, VW Passat, BMW Dreier and other models in conjunction with a continuously variable lowering system. The best thing about it: Apart from replacing the adaptive standard suspension with the KW DDC Plug & Play coilover suspension, no further conversion steps or even modifications to the on-board electronics are necessary. The adaptive KW dampers are simply connected to the original connectors of your car manufacturer via the KW DDC plug connection. The standard control unit then takes over the regulation and control of the KW DDC Plug & Play coilover suspension. Perfect symbiosis of an OEM control unit with the advantages of an adaptive KW coilover suspension Our suspension technology is compatible with the electronics of various car manufacturers. This means that the adaptive KW DDC Plug & Play coilover suspension is immediately recognised by the on-board electronics. All displays and controls of your standard vehicle remain fully functional and combine the advantages of an adaptive damping system with the stylish and sporty lowering of a high-quality KW coilover suspension. Thanks to the exclusive use of rust-free stainless steel and durable components, the functionality of the rust-free KW coilovers is maintained under all weather conditions. Thanks to the dirt-resistant trapezoidal thread and the polyamide threaded ring, adjustment is also possible after a snowy winter, for example. No oxidation occurred on the KW threaded spring legs during a salt spray test. This means that the adjustment of the stepless lowering is not affected even after years. - the plug & play solution for sportiness or more ride comfort at the touch of a button with outstanding looks thanks to stepless lowering - Compatible with the standard suspension control unit - Vehicle-specific damper set-ups such as Comfort / Normal / Sport - Operation via series buttons in the interior Please note the conditions and instructions for this product: - VA + HA height-adjustable (VA coilover struts, HA springs with height adjustment + damper) - Only for vehicles with electronic damper control Technical information: Lowering VA/HA (mm): 10-40/15-40 Version: DDC - Plug & Play Height adjustment: Rebound and compression damping Material: Stainless steel Adjustment VA/HA: thread/thread Approval: Parts certificate (§19.3) Compatible vehicles: Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive MERCEDES-BENZ G-CLASS (W463) 463A 01/2018- AMG G 63 (463.276, 463.277) Off-road vehicle closed Petrol 430 KW 3982 ccm 8 All-wheel drive MERCEDES-BENZ G-CLASS (W463) 463A 01/2018- G 500 (463.260, 463.261) Off-road vehicle closed petrol 310 KW 3982 ccm 8 all-wheel drive

AED 49,445.57*