KW V1 coilover suspension inox | fits Mini Cooper/One (R56) | 10220050

AED 0.00*

Delivery time: Availability on request at Aulitzky Tuning*

Optional: Installation on site at Aulitzky Tuning

- Installation and removal of coilover suspension
- Wheel camber correction kit
- Wheel alignment
- Calibration of assistance systems/lights
- Individual suspension tuning according to customer requirements
- Individual test drive and adjustment together with the customer

Assembly at location DE-91564 Neuendettelsau

Reset choice

AED 0.00*

place a request

Finanzieren Sie ihren Einkauf über die Targobank.

Product number: KW10220050

Product information "KW V1 coilover suspension inox | fits Mini Cooper/One (R56) | 10220050"

KW V1 coilover suspension

Sportiness paired with outstanding looks. With factory pre-configured damping.
Our entry-level model for more driving pleasure through an appealing and individually adjustable lowering is the KW V1 coilover suspension in the KW typical "inox-line". Thanks to its high-quality workmanship, the consistent use of stainless steel struts, corrosion-resistant springs and harmonised components, it stands for many years of driving pleasure - and not just for the life of the car.

Stepless lowering
The KW V1 enables maximum lowering within the tested adjustment range. This varies depending on the vehicle model and can, for example, be between 30 and 70 millimetres or 50 to 90 millimetres for an individual lowering. Thanks to the dirt-resistant trapezoidal thread and the polyamide threaded ring, the stepless lowering can be varied quickly and easily even years later. Depending on the vehicle, lowering is carried out either on the wheel-guiding KW stainless steel suspension struts or, in the case of non-wheel-guiding double-wishbone rear axles, on the rear axle height adjustment.

The benchmark for sporty, dynamic tuning fans
With its harmonious basic set-up for sporty driving on the road, the KW V1 convinces the discerning tuning fan. Our development engineers determine a specific damper set-up and spring rate for each vehicle in order to enhance your driving pleasure with the optimum balance of sportiness and suitability for everyday use. After all, you are not buying just any coilover suspension, but a KW coilover suspension that has been specially developed and tuned for your vehicle type. As a manufacturer, KW only uses its own resources, high-quality components and the same damper technology as mass-produced manufacturers. With the KW V1, the rolling and rolling movements of the vehicle body are reduced during compression, allowing you to benefit from unadulterated directness and sportier handling when driving.

Our experience for your driving pleasure
As a manufacturer of customised suspension solutions for road and racing, we have been the market leader and innovation driver for over 25 years. No matter where in the world, sporty drivers, car manufacturers and tuners rely on our KW coilovers "Made in Germany". Every KW coilover suspension is subjected to extensive load tests during production and is developed and manufactured directly at our company headquarters in Fichtenberg, Swabia, in order to fulfil the high standards of our KW quality management. As a German manufacturer, it is a matter of course for us to provide a multi-year warranty on our KW coilover suspension kits, which exceed OEM quality and cover over 4,600 applications. When installed by one of our KW specialist dealers, the warranty is up to five years.

- Optimally adjusted in advance
- sporty and harmonious damping technology
- Stainless steel technology "inox-line"
- Individually height-adjustable
- Tested adjustment range
- Ready-to-install complete solution
- High-quality components for a long service life
- Complete documentation for easy handling

Setup - factory pre-configured damping setup
The KW V1 has a vehicle-specific, permanently configured damper setup. The spring and damper are perfectly matched to each other so that you experience an optimum balance of sportiness and suitability for everyday use when driving.

Even with a full payload and maximum axle loads, the dampers always work with a sporty characteristic curve. It is interesting to note that the KW V1 is particularly popular with tuning enthusiasts who prioritise the idea of show & shine.

Please note the conditions and instructions for this product:
- VA + HA height adjustable (coilover struts)
- When used with standard wheel/tire combinations, additional commercially available track wideners from the accessories may be required
- Dampers have easy-to-use adjustment wheels. Due to the design, the rebound stage can only be adjusted when the piston rod is accessible.
- For camber correction on the rear axle, we recommend the use of the adjustable KW control arm. Vehicle-specific KW control arms can be found in the accessories table.

Technical information:
Product line: Street Performance
Lowering VA/HA (mm): 30-55/30-55
Design: V1
Hardness adjustment: none
Material: Stainless steel
Adjustment VA/HA: Thread/thread
Approval: Parts certificate (§19.3)

Compatible vehicles:
Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive
MINI MINI (R56) MINI-N, UKL-L 11/2005-01/2014 Cooper Hatchback Petrol 85 KW 1598 ccm 4 Front Wheel Drive
MINI MINI (R56) MINI-N, UKL-L 11/2005-01/2014 Cooper Hatchback Petrol 88 KW 1598 ccm 4 Front Wheel Drive
MINI MINI (R56) MINI-N, UKL-L 11/2005-01/2014 Cooper Hatchback Petrol 90 KW 1598 ccm 4 Front Wheel Drive
MINI MINI (R56) MINI-N, UKL-L 11/2005-01/2014 One Hatchback Petrol 55 KW 1397 ccm 4 front-wheel drive
MINI MINI (R56) MINI-N, UKL-L 11/2005-01/2014 One Hatchback Petrol 55 KW 1598 ccm 4 front-wheel drive
MINI MINI (R56) MINI-N, UKL-L 11/2005-01/2014 One Hatchback Petrol 70 KW 1397 ccm 4 front-wheel drive
MINI MINI (R56) MINI-N, UKL-L 11/2005-01/2014 One Hatchback Petrol 72 KW 1598 ccm 4 front-wheel drive

Please enter a valid email address.

Your question *

Please enter a valid question.

I agree that my data will be processed to answer the question. I have taken note of the Privacy Policy and agree to the information described therein.*

To continue, enter the characters shown above*

Fields marked with * are mandatory.

There aren't any asked questions yet.

Last seen products

Mirror caps Carbon | fits BMW M5 incl. Competition (F90) S63 | RKP

The RKP carbon mirror caps for the F90 are definitely a highlight on your vehicle.They impress with their perfect fit and easy installation. Details:- Flawless fit- Extremely light- Clear lacquered and high-gloss polished Compatible vehicles:BMW M5 441kW/600PSBMW M5 Competition 460kW/625PS

AED 3,736.70*

Intake system Carbon | fits Honda Civic Gen.10 Type-R (FK8) 320hp | Eventuri

Facts:Brand: EventuriMaterial: CarbonInstallation: like original part (exchange)Parts certificate: For this product a certificate is available for certain regions and vehicles (details below) The intake system for the Honda Civic Type-R FK8 was a new kind of challenge for the aircraft engineers at Eventuri, requiring a lot of ingenuity and technical know-how. The problem was the position of the OEM airbox, which sits directly in front of the radiator fan in the FK8. This arrangement poses a challenge for Eventuri's open filter system - how do you ensure that the intake system does not draw hot air out of the engine compartment?The solution is a completely new type of carbon scoop that draws the fresh airflow from the direction of the fenders. The opening, which is twice as large as the original airbox, is no longer in the airflow of the radiator fan and thus ensures cool and even ventilation. The well-known effect of the Eventuri intake systems then also takes effect in the Honda Civic Type-R FK8:The airflow is accelerated via the cone inside the filter housing. The bundled and directed air then reaches the turbo at lower temperatures and more evenly due to less friction in the air supply. This not only significantly improves responsiveness, but also increases performance. The Eventuri Honda Civic Type-R FK8 intake comes with the following parts:- Patented Eventuri filter- Full carbon prepreg airbox- Full carbon intake manifold- Secondary intake scoop- Carbon cover Parts certificateThe manufacturer's specifications apply for installation. An existing certificate is no guarantee that the product can also be installed in the corresponding vehicle. A certificate is available for this product for the following regions and vehicles:* DE/AT: Vehicle registration document, field K --- CH/LI: Vehicle registration document, field 24Country Model Type approval*DE/AT Honda Civic 5DR FC e11*2007/46*3633*..DE/AT Honda Civic 5DR FK e6*2007/46*0256*..CH/LI Civic 2.0i TypeR 1HA511CH/LI Civic 2.0i TypeR 1HA564CH/LI Civic 2.0i TypeR 1HA580CH/LI Honda Civic 1HA493 Compatible vehicles:VehicleVehicle typePowerEngine capacityEngine typeYear of construction Honda Civic (FK8)Type-R235kW / 320hp1996cm³K20C106.17 - 12.22

AED 7,292.80*

Intake system Carbon | fits Honda Civic Gen.9 Type-R (FK2) 310hp | Eventuri

Facts:Power increase: 24-30 hp, 28-35 ft-lbBrand: EventuriMaterial: CarbonParts certificate: A certificate is available for this product for certain regions and vehicles (details below) The FK2 Type R V2 intake is an updated version of our original FK2 system that now replaces the stock rubber intake tube with our carbon tube and a custom silicone hose. The new carbon tube also includes the MAF sensor and therefore also replaces our original MAF metal tube from the original Eventuri system. The addition of the carbon tube smooths the path from the venturi filter housing to the stock turbo inlet tube and the difference is significant in terms of additional power gained. The rest of the intake remains the same, with our cold air scoop and venturi filter housing ensuring smooth airflow and low intake temperatures. By incorporating an effective cold air intake, which the stock system lacks, and coupling it with our patented venturi housing and carbon intake tube, our intake delivers industry-leading results consistently. The Eventuri differenceThe FK2 Type R V2 Eventuri system uses our patented carbon fiber housing with our custom Gen 2 filter that provides an aerodynamically efficient airflow path from the filter to the turbos. Not just another cone filter with a heat shield, but a unique design that creates the Venturi effect and maintains laminar flow conditions to reduce drag on the turbo. Each component has been designed for a specific purpose and to a very high standard. Each Eventuri FK2 V2 kit consists of:Patented carbon fiber intake housingAnodized aluminum intake coverTailor-made generation 2 high-flow filterCarbon intake tube with integrated MAF sensor holderCustomized silicone hose with vent outletsCarbon cold air duct with water drainOEM windshield pre-cut for the ductMounting bracket made from laser-cut stainless steelHigh-quality silicone coupling with hose clamps according to OEM specification Parts certificateThe manufacturer's specifications apply for installation. An existing certificate is no guarantee that the product can also be installed in the corresponding vehicle. A certificate is available for this product for the following regions and vehicles:* DE/AT: Vehicle registration document, field K --- CH/LI: Vehicle registration document, field 24Country Model Type approval*DE/AT Honda Civic e11*xx/xx*0256*.. Compatible vehicles:VehicleVehicle typePowerEngine capacityEngine typeYear of construction Honda Civic (FK2)Type-R228kW / 310hp1996cm³K20C108.15 - 12.16

AED 6,394.10*

Cold Air Intake System | fits Mercedes-Benz AMG GT/GTS/GTC/GTR (C190/R190) | Blackboost

Unleash the ultimate performance of your Mercedes AMG GT M178 and transform your driving experience with the BlackBoost Gen-2 Cold Air Intake System - a premium upgrade that boosts performance, optimizes airflow and enhances style. Whether you're aiming for thrilling stock performance or want to push your AMG to over 1000 WHP, this system is designed to deliver unprecedented results. The factory airbox, while adequate for normal use, limits airflow and filter surface area, limiting your car's true potential. The BlackBoost Cold Air Intake is precisely engineered to overcome these limitations by maximizing airflow and minimizing intake temperatures - while fitting seamlessly into the engine bay of your AMG GT. Advanced design features- CFD Optimized Intake Pipes: Made from molded synthetic composite material, these pipes provide smooth, high-flow air delivery and feature a 1/8 NPT port for methanol injection to support extreme power setups.- Oversized turbo coupler and intake manifold: The oversized turbo coupler and intake duct are strategically designed to maximize airflow and improve engine efficiency and performance in all driving conditions.- 5.5-inch High-Flow Synthetic Dry Air Filter: These oversized filters are designed for superior filtration and maximum airflow. They protect your engine while increasing performance.- Laser-cut aluminum airbox panels: These airboxes are strong, lightweight and powder-coated for a sleek finish. They are built to last and ensure a precise seal to keep the intake air temperature cool.- Customized cover: This high-quality engine cover improves protection while providing a classy, polished look that enhances the aesthetics of your engine bay.- Plug-and-play installation: No ECU tuning or additional modifications are required. The system easily integrates into your AMG GT's existing setup and supports further upgrades such as turbochargers, downpipes and methanol injection. Important performance benefits- Proven 8-30+ hp increase on production vehicles- Improved throttle response and airflow across the entire rev range- Higher volumetric efficiency and filter surface area compared to OEM parts- Supports extreme airflow requirements for systems with more than 1000 WHP- Oversized turbocharger and intake duct for optimized airflow and engine performance- Customized engine cover for enhanced protection and style- No check engine light (CEL) or ECU tuning required Scope of delivery:- Powder-coated airbox and custom engine cover- 5.5-inch high-flow synthetic dry air filter- Molded synthetic composite intake manifold with 1/8 NPT methanol port- Oversized turbo coupler and intake port- CNC anodized plug- AMG badge transfer kit- 1/8 NPT plug Compatible vehicles:AMG GT (C190/R190) - M178 4.0L V8 BiTurbo - (2015 - 2021)AMG GT S (C190/R190) - M178 4.0L V8 BiTurbo - (2016 - 2021)AMG GT C (C190/R190) - M178 4.0L V8 BiTurbo - (2017 - 2021)AMG GT R (C190/R190) - M178 4.0L V8 BiTurbo - (2018 - 2021)

AED 6,275.59*

KW V1 coilover suspension inox | fits Mini Cooper/One (R56) | 10220050

Ratenrechner

Ask a question

Previously asked questions