KW V2 coilover suspension inox | fits Mini FWD incl. JCW (F56/F65/F66) | 152200AG | 152200AH

From AED 7,849.48*

Delivery time: Availability on request at Aulitzky Tuning*

Does the vehicle have electronic damper control?

YES

Optional: Installation on site at Aulitzky Tuning

- Installation and removal of coilover suspension
- Wheel camber correction kit
- Wheel alignment
- Calibration of assistance systems/lights
- Individual suspension tuning according to customer requirements
- Individual test drive and adjustment together with the customer

Assembly at location DE-91564 Neuendettelsau

Reset choice

AED 0.00*

Finanzieren Sie ihren Einkauf über die Targobank.

Product number: KW152200AGH

Product information "KW V2 coilover suspension inox | fits Mini FWD incl. JCW (F56/F65/F66) | 152200AG | 152200AH"

KW V2 coilover suspension

For more stability or driving comfort. With adjustable rebound damping.
Sporty drivers who want more than just an outstanding look thanks to stepless lowering in the tested adjustment range will find the ideal suspension solution in the KW V2 coilover suspension in the typical KW "inox-line". In addition to the high-quality workmanship, the use of rust-free stainless steel struts, corrosion-resistant components and the convincing durability, the KW V2 convinces with the possibility of additionally adapting the damper setup to your own requirements with the rebound stage adjustable in 16 clicks.

More comfort or more sport - you decide
As with all KW coilover suspensions, the KW engineers develop the vehicle-specific KW damper tuning, which is appreciated by car enthusiasts worldwide, in extensive test cycles on the Nürburgring Nordschleife and in our test centre on the KW 7-post driving dynamics test bench. With a KW coilover suspension you will experience your car more directly and dynamically. With the KW V2, as an experienced sports driver, you can influence the handling and comfort yourself with the individually adjustable rebound damping. The 16 precise clicks allow you to tune the KW dampers to be firmer or more comfortable without affecting the bottom valve of the compression stage.

Depending on the vehicle type, the rebound valves of the KW twin-tube dampers are adjusted at the upper end of the piston rod via an integrated adjustment wheel or the slip-on adjustment wheel included in the scope of delivery. By increasing the rebound force via the adjustment wheel, the body movements on the body are reduced. As a result, your car will track more accurately and you will have even more stability at higher cornering speeds. If, for example, you change the approved wheel/tyre combinations of your car manufacturer for larger rims, you can use the KW V2 with adjustable rebound to perfectly match the handling of your car and your new alloy wheels.

KW quality - your satisfaction is our incentive
During production at our headquarters in Fichtenberg, the KW Variant 2 "inox-line" coilover suspension kits are subjected to extensive tests during the production process in order to fulfil our quality standards. Every single damper and every suspension is extensively tested. As a German manufacturer, it is a matter of course for us to provide a warranty of up to 5 years on our coilover suspension kits, which exceed the requirements of the original equipment industry, and on our suspension programme comprising over 4,600 applications when installed by one of our KW specialist dealers.

Finally, KW coilover suspension struts are 100 per cent rust-free under all weather conditions and have an unlimited service life. The function of the stepless lowering via the dirt-resistant trapezoidal thread and the polyamide threaded ring on the KW V2 is also designed for many years of use. In a salt spray test, no oxidation occurred on the KW coilover struts. This means that the adjustment of the stepless lowering is not affected even after years of use.

- Damping technology adjustable in the rebound stage in 16 exact clicks
- Stainless steel technology inox-line
- Individual, stepless lowering
- Tested adjustment range
- Ready-to-install complete solution
- high-quality components for a long service life
- Complete documentation for easy application

Setup - Adjustable rebound damping with 16 clicks.
With the KW V2, you can further adjust the vehicle-specific KW damper tuning, which is appreciated by car enthusiasts worldwide, with 16 clicks. The rebound adjustment allows you to take into account the changes in driving dynamics that result from changing the complete set of wheels or fitting winter tyres. The damper characteristic curve of the weather-resistant KW V2 coilover suspension can be adjusted to be firmer or more comfortable, depending on your own requirements. The suspension is suitable for all sporty drivers who want more than just stepless lowering for their driving pleasure.

Please note the conditions and instructions for this product:
- VA + HA height-adjustable (VA coilover struts, HA springs with height adjustment + damper)
- For vehicles with electronic damper control, this must be decommissioned. Electronic kit for decommissioning is included in the scope of delivery for item variant "YES".
- Dampers have easy-to-operate adjustment wheels. Due to the design, the rebound stage can only be adjusted when the piston rod is accessible.
- For camber correction on the rear axle, we recommend the use of the adjustable KW wishbone.

Technical information:
Product line: Street Performance
Lowering VA/HA (mm): 20-45/20-45
Design: V2
Hardness adjustment: Rebound
Material: Stainless steel
Adjustment VA/HA: Thread/thread
Approval: Parts certificate (§19.3)

Compatible vehicles:
Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive
MINI MINI (F56) FML2, UKL-L 12/2013- Cooper Hatchback Petrol 100 KW 1499 ccm 3 Front wheel drive
MINI MINI (F56) FML2, UKL-L 12/2013- Cooper D Hatchback Diesel 85 KW 1496 ccm 3 Front wheel drive
MINI MINI (F56) FML2, UKL-L 12/2013- Cooper S Hatchback Petrol 120 KW 1998 ccm 4 Front-wheel drive
MINI MINI (F56) FML2, UKL-L 12/2013- Cooper S Hatchback Petrol 131 KW 1998 ccm 4 Front-wheel drive
MINI MINI (F56) FML2, UKL-L 12/2013- Cooper S Hatchback Petrol 141 KW 1998 ccm 4 Front-wheel drive
MINI MINI (F56) FML2, UKL-L 12/2013- Cooper S JCW Hatchback Petrol 155 KW 1998 ccm 4 Front-wheel drive
MINI MINI (F56) FML2, UKL-L 12/2013- Cooper SD Hatchback Diesel 120 KW 1995 ccm 4 Front-wheel drive
MINI MINI (F56) FML2, UKL-L 12/2013- Cooper SD Hatchback Diesel 125 KW 1995 ccm 4 Front-wheel drive
MINI MINI (F56) FML2, UKL-L 12/2013- John Cooper Works Hatchback Petrol 170 KW 1998 ccm 4 front-wheel drive
MINI MINI (F56) FML2, UKL-L 12/2013- One Hatchback Petrol 75 KW 1198 ccm 3 Front-wheel drive
MINI MINI (F56) FML2, UKL-L 12/2013- One Hatchback Petrol 75 KW 1499 ccm 3 Front-wheel drive
MINI MINI (F56) FML2, UKL-L 12/2013- One D Hatchback Diesel 70 KW 1496 ccm 3 Front-wheel drive
MINI MINI (F56) FML2, UKL-L 12/2013- One First Hatchback Petrol 55 KW 1198 ccm 3 Front-wheel drive
MINI MINI (F56) FML2, UKL-L 12/2013- One First Hatchback Petrol 55 KW 1499 ccm 3 Front-wheel drive
MINI MINI (F66, F65) 03/2024- Cooper C Hatchback Petrol 120 KW 1998 ccm 4 Front-wheel drive
MINI MINI (F66, F65) 03/2024- Cooper C (F65) Hatchback Petrol 115 KW 1499 ccm 3 Front-wheel drive
MINI MINI (F66, F65) 03/2024- Cooper S Hatchback Petrol 150 KW 1998 ccm 4 Front-wheel drive
MINI MINI (F66, F65) 03/2024- John Cooper Works Hatchback Petrol 170 KW 1998 ccm 4 Front-wheel drive

Please enter a valid email address.

Your question *

Please enter a valid question.

I agree that my data will be processed to answer the question. I have taken note of the Privacy Policy and agree to the information described therein.*

To continue, enter the characters shown above*

Fields marked with * are mandatory.

There aren't any asked questions yet.

Last seen products

Brake system VA 396x36mm 6K | fits R8 (42), S6 (4F) / M2/M4 (F87/F82), M3/X5 (E92/E70) / Mustang | parts certificate | MOVIT

MOVIT DDE steel brake system 396x36mm (6 piston calliper) for the front axle, from 20 inch rims upwardsApplication-focussed development is the cornerstone of this high-performance brake system. The required balance of weight, performance and durability is optimally combined. The uncompromising selection of materials in production results in a highly unique product that meets the diverse requirements of extreme automotive applications. The most important features of the MOVIT brake system are- The progressive staggering of the piston diameters, matched to the vehicle, so that precisely parallel contact pressure between the pad and the disc is guaranteed. This enables even wear of the brake pads and ensures even heat transfer and a reduced system temperature.- Very good heat dissipation due to the open design of the brake pad contour.- Calipers manufactured from high-strength, highly tempered aircraft aluminium 7075 with high-quality material properties (stiffer components, more homogeneous structure), hard anodised and coated with a triple layer of paint.- Optimised stability due to the length of the callipers- Larger brake disc diameter and thickness, more cross holes (each pre-cast hole is re-drilled and countersunk, which has a favourable effect on the flow).- The brake discs are thermally tempered.- The optimised DDE ventilation system (double directional evolvent system) of the brake disc has an 80% larger surface area compared to other brake discs, the temperature of the brake disc is significantly reduced and therefore also the wear.- Long service life of the wearing parts, excellent response behaviour, steel flex lines ensure consistent performance.- Optimally matched brake pads ensure fading resistance, a long service life and reduced wear on spare parts Attention: The conversion means that only rims with at least 20 inches can be fitted! The chassis number of the vehicle on which the brakes are fitted is required for the parts certificate. MOVIT sports brake callipers, 6s1, 6-piston- Milled from high-strength aircraft aluminium 7075- Two-piece- Use of maximum disc size due to long design- Significantly improved rigidity and extended contact surface of the pad- Uniform heat transfer- Reduced system temperature- Low, even pad wear- Progressive piston staggering- Crown system for fixing the brake hose- RAPAD-X system for quick brake pad replacement without removing the caliper from the bracket- Open brake pad track for optimised cooling- Maximum stability- Maximum braking force MOVIT sports brake discs, 396x36mm, 2-piece- Highly efficient DDE cooling system- Perforated for optimum response behaviour even on wet roads- Maximum fading resistance- Special alloy for high thermal conductivity MOVIT comfort brake pads, BE-6s1- Enlarged friction surface- Lower system temperature- Uniform heat transfer- Longer service life Scope of delivery:2x MOVIT brake caliper (left/right)2x MOVIT brake disc (left/right)2x vehicle-specific brake caliper adapter1x set of comfort brake pads2x steel flex lines1x assembly material1x installation instructions and running-in instructions1x parts certificate Compatible vehicles:Audi R8 type 420 -2018Audi S6 Type 4FBMW M2 F87BMW M3 E92BMW M4 F82BMW X5 E70Ford Mustang VI 2016- 2.3l EcoboostFord Mustang VI 5.0 V8 GT 2015-Mercedes Benz W906 Sprinter 3t & 3.5t

AED 24,015.50*

KW decommissioning kit for electronic damping | fits Audi RS4/RS5 quattro B8 | 68510358

KW decommissioning kit for electronic damper force adjustment - Prevents error messages when changing the suspension- Only the standard damper control is decommissioned and at the same time- prevents error messages at the same time- The function of the control unit is fully retained- Can also be used separately for other makes and OE aftermarket suspensions Compatible vehicles:Manufacturer Model Version Body Fuel Performance Displacement Cylinder DriveAUDI A4 Avant (B8) 8K5 11/2007-12/2015 RS4 quattro estate petrol 331 KW 4163 ccm 8 all-wheel driveAUDI A5 (B8) 8T3 06/2007-01/2017 RS5 quattro Coupe petrol 331 KW 4163 ccm 8 all-wheel driveAUDI A5 Cabriolet (B8) 8F7 02/2009-01/2017 RS5 quattro Cabriolet petrol 331 KW 4163 ccm 8 all-wheel drive

AED 1,980.28*

Stabilizer front + rear axle set | fits BMW 440i/M440i/M440d/420/430 (G22/G23) | 33662-4 | incl. approval | H&R

Made from high-strength spring steel, most H&R anti-roll bars can be adjusted on the front and rear axle. Precision-forged ends and the use of bearings made from a special composite material guarantee precise wheel guidance and reduce the vehicle's tendency to roll. Can be combined with all commercially available standard or sports suspensions. Brief description: - Installation location front axle: Ø 26 mm, not adjustable - Installation location rear axle: Ø 19 mm, not adjustable - with parts certificate - Please note the information! - Illustration may differ from the original The product benefits at a glance: - Reduced rolling tendency of the vehicle - Better handling due to reduced body roll - Partially multi-adjustable - Minimal loss of comfort - Under- or oversteer are reduced or changed - Can be installed with standard or sports suspension - High-strength special spring steel - Bearings made from special composite material - In-house development and production in Germany - With parts certificate Note 55: When installing the H&R stabilisers, the standard add-on parts must also be used, unless otherwise supplied by H&R. It must be ensured that the original parts to be used are in perfect condition; if necessary, these parts must be replaced. Note 60: With this stabiliser bar set, the VA stabiliser bar can also be installed separately (without the HA stabiliser bar) and is approved. However, if only the front stabiliser bar is installed separately, the vehicle may have a tendency to understeer. Usage numbers: 33662-4, 336624 Compatible vehicles: - BMW 4 Series Convertible (G23, G83) M 440i Mild-Hybrid xDrive (275 kW, 374 hp) - BMW 4 Series Convertible (G23, G83) M 440i Mild-Hybrid xDrive (285 kW, 387 hp) - BMW 4 Series Coupe (G22, G82) 420d Mild-Hybrid xDrive (140 kW, 190 hp) - BMW 4 Series Coupe (G22, G82) 430d Mild-Hybrid xDrive (210 kW, 286 hp) - BMW 4 Series Coupe (G22, G82) 430i xDrive (190 kW, 258 hp) - BMW 4 Series Coupe (G22, G82) M 440d Mild-Hybrid xDrive (275 kW, 374 hp) - BMW 4 Series Coupe (G22, G82) M 440i Mild-Hybrid xDrive (285 kW, 387 hp)

AED 2,898.20*

Tip

Aulitzky Exhaust | Race exhaust system 3” (76mm) with valve control | fits Ferrari F8 Tributo/Spider 721hp | Motorsport articles

Performance-enhancing 3” (76mm) exhaust system with flap control Facts: - Material: Stainless steel - with Thermo-Integral insulation - Tailpipe not selectable, pipe outlets for original trim in the rear apron - without approval* Compatible Vehicles:VehicleVehicle typePowerEngine capacityEngineYear of constructionFerrari F8 Tributo Coupe3.9530kW / 721hp3902cm³F 154 CD03.19 -Ferrari F8 Spider3.9530kW / 721hp3902cm³F 154 CD12.19 - *ATTENTION!Exhaust systems without approval are not permitted for use on public roads and are only intended for racing purposes! If you nevertheless install a product without approval in your vehicle and use it within the scope of the StVZO, you are liable to prosecution. Possible consequences that you can expect in this case: Expiry of the operating license according to §19 of the StVZO and a possible resulting immobilization of the vehicle. Other possible consequences, such as a charge of tax evasion, as well as possible investigations by the environmental authorities are at the discretion of the investigators.

AED 30,095.70*

Brake air duct Carbon for 1M Raze front lip | fits BMW 1 series M (E82) 340hp N54 | RevoZport

This brake cooling duct kit is designed to be adapted to the 1M Raze front splitter to provide fresh cooling air directly to the brake discs. Application: Fits 1M Raze front splitter onlyMaterial: FRP or carbonInstallation: bolt-onExpert opinion: Material certificate Compatible vehicles:VehicleVehicle typePowerEngine capacityEngine typeYear of construction BMW 1er Coupe (E82)M250kW / 340hp2979cm³N54 B30 A03.11 - 06.12

AED 4,123.70*

Tip

Aulitzky Exhaust | ECE downpipe 3” (76mm) with sports catalyst | fits Skoda Octavia RS 220/230 (5E)

Facts: - replaces the main catalyst - with 200 cell stainless steel sports catalyst - Euro 6 compatible - with ECE approval* Compatible vehicles: VehicleVehicle typePowerEngine capacityEngineYear of construction SkodaOctavia III RS (5E)162kW / 220hp1984cm³ (2.0 TSI)CHHB05.13 - 02.17 SkodaOctavia III RS (5E)169kW / 230hp1984cm³ (2.0 TSI)CHHA05.15 - 10.20 Note: Depending on the software version, the engine control light may light up. We recommend a software adjustment in this case. *This downpipe has ECE approval so that it can be used within the scope of the German Road Traffic Licensing Regulations (StVZO) without registration in the vehicle documents.

From AED 8,514.00*

Details

KW V2 coilover suspension inox | fits Mini FWD incl. JCW (F56/F65/F66) | 152200AG | 152200AH

Ratenrechner

Ask a question

Previously asked questions