Free shipping
info@aulitzkytuning.ae
+971581853418

KW V3 Clubsport coilover suspension | fits Mercedes-Benz C63 AMG (W204) | 35225833

AED 0.00*

Delivery time: Availability on request at Aulitzky Tuning*

Optional: Installation on site at Aulitzky Tuning

- Installation and removal of coilover suspension
- Wheel camber correction kit
- Wheel alignment
- Calibration of assistance systems/lights
- Individual suspension tuning according to customer requirements
- Individual test drive and adjustment together with the customer

Assembly at location DE-91564 Neuendettelsau
Reset choice
AED 0.00*
Product number: KW35225833
Product information "KW V3 Clubsport coilover suspension | fits Mercedes-Benz C63 AMG (W204) | 35225833"

KW V3 Clubsport coilover suspension incl. support bearing

With an uncompromising technology transfer from racing to the road, the KW Clubsport coilovers convince.
The KW Clubsport coilovers convince with their uncompromising combination of high-end racing technology with maintenance-free KW original equipment components and expertises.
This gives you the ideal accessories to realise the full potential of your sports car at trackdays, sports driver training courses, tourist drives on Grand Prix circuits and on the Nürburgring Nordschleife.

Developed for the toughest racetrack in the world: the Nürburgring Nordschleife
Even in their basic set-up, KW Clubsport coilovers are tuned to the different track surfaces, steep bends, jumps and chicanes of the 20.8 kilometre long Nürburgring Nordschleife. After all, as one of the most successful suspension manufacturers and suppliers in motorsport, we are at home on the Nordschleife.
In the VLN Endurance Championship alone, we equip over 70 racing teams and, as a suspension manufacturer, have supported six overall victories at the ADAC Zurich 24h Race Nürburgring in ten years. The winner of the ADAC GT Masters 2011 also relies on our racing expertise, from which the KW Clubsport coilovers benefit.
The basic setup of the KW V3 Clubsport and KW V4 Clubsport with separate expansion tank, which is perfectly adapted to the Nordschleife, allows you to adjust your sports car even more individually to the desired sports tyre setup thanks to the numerous adjustment options.
In addition to optionally available adjustable support bearings, you can adjust the damping forces of the KW Clubsport coilovers independently in the rebound and compression stages with the integrated

KW V3 Clubsport coilover suspension technology like in racing
With the adjustment wheels for the rebound adjustment, you can fine-tune the recommended basic setup for your sports car and your individually installed performance components with 16 exact clicks. This allows you to directly influence changed wheel loads, for example to influence bodywork movements. Separate from the rebound adjustment, the KW V3 Clubsport allows you to adjust the compression damping with twelve exact clicks in the low-speed range to your requirements, such as the sports tyres used.
These setting options allow you to consider individual setups to suit the vehicle weight, sports tyre characteristics, track characteristics and operating conditions.

- Freely adjustable damping technology in rebound and compression damping
- Stainless steel technology "inox-line"
- Stepless lowering
- Tested adjustment range
- high-quality components for a long service life
- Adjustable rebound damping with 16 exact clicks
- Adjustable compression damping with 12 exact clicks
- Unique, independently acting damping force adjustment
- optionally available with aluminium Unibal support bearing.

Setup: Application range and damper tuning
The KW V3 Clubsport coilover suspensions impress with their vehicle-specific setup for trackday events on the Nürburgring Nordschleife, as well as the possibility of quickly tuning these suspensions for other racetracks and individual performance sports cars.

Please note the conditions and instructions for this product:
- VA + HA height adjustable (VA coilover struts, HA springs with height adjustment + damper)
- When used with standard wheel/tyre combinations, additional standard wheel spacers from the accessories may be required
- Clubsport suspension with support bearing: only available with VA support bearing

Technical information:
Lowering VA/HA (mm): 5-30/0-30
Version: V3 Clubsport
Hardness adjustment: Rebound and compression
Material: Stainless steel
Adjustment VA/HA: Thread/thread
Approval: Parts certificate (§19.3)

Compatible vehicles:
Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive
MERCEDES-BENZ C-KLASSE (W204) 204, 204 AMG, 204K 01/2007-01/2015 C 63 AMG (204. 077) Notchback Petrol 336 KW 6208 ccm 8 Rear-wheel drive
MERCEDES-BENZ C-KLASSE (W204) 204, 204 AMG, 204K 01/2007-01/2015 C 63 AMG (204.077) Notchback Petrol 358 KW 6208 ccm 8 Rear-wheel drive
MERCEDES-BENZ C-KLASSE (W204) 204, 204 AMG, 204K 01/2007-01/2015 C 63 AMG (204.077) Notchback Petrol 373 KW 6208 ccm 8 Rear-wheel drive

Please enter a valid email address.
Please enter a valid question.
Fields marked with * are mandatory.

There aren't any asked questions yet.
Last seen products

Last seen products

KW decommissioning kit for electronic damping | fits Audi RS4/RS5 quattro B8 | 68510358
KW decommissioning kit for electronic damper force adjustment - Prevents error messages when changing the suspension- Only the standard damper control is decommissioned and at the same time- prevents error messages at the same time- The function of the control unit is fully retained- Can also be used separately for other makes and OE aftermarket suspensions Compatible vehicles:Manufacturer Model Version Body Fuel Performance Displacement Cylinder DriveAUDI A4 Avant (B8) 8K5 11/2007-12/2015 RS4 quattro estate petrol 331 KW 4163 ccm 8 all-wheel driveAUDI A5 (B8) 8T3 06/2007-01/2017 RS5 quattro Coupe petrol 331 KW 4163 ccm 8 all-wheel driveAUDI A5 Cabriolet (B8) 8F7 02/2009-01/2017 RS5 quattro Cabriolet petrol 331 KW 4163 ccm 8 all-wheel drive

AED 1,664.10*
Stabilizer front + rear axle set | fits BMW 440i/M440i/M440d/420/430 (G22/G23) | 33662-4 | incl. approval | H&R
Made from high-strength spring steel, most H&R anti-roll bars can be adjusted on the front and rear axle. Precision-forged ends and the use of bearings made from a special composite material guarantee precise wheel guidance and reduce the vehicle's tendency to roll. Can be combined with all commercially available standard or sports suspensions. Brief description: - Installation location front axle: Ø 26 mm, not adjustable - Installation location rear axle: Ø 19 mm, not adjustable - with parts certificate - Please note the information! - Illustration may differ from the original The product benefits at a glance: - Reduced rolling tendency of the vehicle - Better handling due to reduced body roll - Partially multi-adjustable - Minimal loss of comfort - Under- or oversteer are reduced or changed - Can be installed with standard or sports suspension - High-strength special spring steel - Bearings made from special composite material - In-house development and production in Germany - With parts certificate Note 55: When installing the H&R stabilisers, the standard add-on parts must also be used, unless otherwise supplied by H&R. It must be ensured that the original parts to be used are in perfect condition; if necessary, these parts must be replaced. Note 60: With this stabiliser bar set, the VA stabiliser bar can also be installed separately (without the HA stabiliser bar) and is approved. However, if only the front stabiliser bar is installed separately, the vehicle may have a tendency to understeer. Usage numbers: 33662-4, 336624 Compatible vehicles: - BMW 4 Series Convertible (G23, G83) M 440i Mild-Hybrid xDrive (275 kW, 374 hp) - BMW 4 Series Convertible (G23, G83) M 440i Mild-Hybrid xDrive (285 kW, 387 hp) - BMW 4 Series Coupe (G22, G82) 420d Mild-Hybrid xDrive (140 kW, 190 hp) - BMW 4 Series Coupe (G22, G82) 430d Mild-Hybrid xDrive (210 kW, 286 hp) - BMW 4 Series Coupe (G22, G82) 430i xDrive (190 kW, 258 hp) - BMW 4 Series Coupe (G22, G82) M 440d Mild-Hybrid xDrive (275 kW, 374 hp) - BMW 4 Series Coupe (G22, G82) M 440i Mild-Hybrid xDrive (285 kW, 387 hp)

AED 2,435.46*
Brake air duct Carbon for 1M Raze front lip | fits BMW 1 series M (E82) 340hp N54 | RevoZport
This brake cooling duct kit is designed to be adapted to the 1M Raze front splitter to provide fresh cooling air directly to the brake discs. Application: Fits 1M Raze front splitter onlyMaterial: FRP or carbonInstallation: bolt-onExpert opinion: Material certificate Compatible vehicles:VehicleVehicle typePowerEngine capacityEngine typeYear of construction BMW 1er Coupe (E82)M250kW / 340hp2979cm³N54 B30 A03.11 - 06.12

AED 3,340.20*
Tip
Aulitzky Exhaust | ECE downpipe 3” (76mm) with sports catalyst | fits Skoda Octavia RS 220/230 (5E)
Facts: - replaces the main catalyst - with 200 cell stainless steel sports catalyst - Euro 6 compatible - with ECE approval* Compatible vehicles: VehicleVehicle typePowerEngine capacityEngineYear of construction SkodaOctavia III RS (5E)162kW / 220hp1984cm³ (2.0 TSI)CHHB05.13 - 02.17 SkodaOctavia III RS (5E)169kW / 230hp1984cm³ (2.0 TSI)CHHA05.15 - 10.20 Note: Depending on the software version, the engine control light may light up. We recommend a software adjustment in this case. *This downpipe has ECE approval so that it can be used within the scope of the German Road Traffic Licensing Regulations (StVZO) without registration in the vehicle documents.

From AED 6,796.89*