KW V4 Clubsport coilover suspension | fits BMW 2/3 Series (G42/G20) | 397202CL

AED 0.00*

Delivery time: Availability on request at Aulitzky Tuning*

Optional: Installation on site at Aulitzky Tuning

- Installation and removal of coilover suspension
- Wheel camber correction kit
- Wheel alignment
- Calibration of assistance systems/lights
- Individual suspension tuning according to customer requirements
- Individual test drive and adjustment together with the customer

Assembly at location DE-91564 Neuendettelsau

Reset choice

AED 0.00*

place a request

Finanzieren Sie ihren Einkauf über die Targobank.

Product number: KW397202CL

Product information "KW V4 Clubsport coilover suspension | fits BMW 2/3 Series (G42/G20) | 397202CL"

KW V4 Clubsport coilover suspension incl. support bearings

With an uncompromising technology transfer from racing to the road, the KW Clubsport coilovers convince.
The KW Clubsport coilovers convince with their uncompromising combination of high-end racing technology with maintenance-free KW original equipment components and expertises.
This gives you the ideal accessories to realise the full potential of your sports car at trackdays, sports driver training courses, tourist drives on Grand Prix circuits and on the Nürburgring Nordschleife.

Developed for the toughest racetrack in the world: the Nürburgring Nordschleife
Even in their basic set-up, KW Clubsport coilovers are tuned to the different track surfaces, steep bends, jumps and chicanes of the 20.8 kilometre long Nürburgring Nordschleife. After all, as one of the most successful suspension manufacturers and suppliers in motorsport, we are at home on the Nordschleife.
In the VLN Endurance Championship alone, we equip over 70 racing teams and, as a suspension manufacturer, have supported six overall victories at the ADAC Zurich 24h Race Nürburgring in ten years. The winner of the ADAC GT Masters 2011 also relies on our racing expertise, from which the KW Clubsport coilovers benefit.
The basic setup of the KW V3 Clubsport and KW V4 Clubsport with separate expansion tank, which is perfectly adapted to the Nordschleife, allows you to customise your sports car even more individually to the desired sports tyre setup thanks to the numerous adjustment options.

KW V4 Clubsport coilover suspension
The vehicle-specific basic setup of the KW V4 Clubsport, developed in numerous test and measurement drives on the Nordschleife and the KW 7-post driving dynamics test bench, can be further adapted to your wheel loads, vehicle weight and the modified body stiffness, for example with a bolted cage, welded-in safety cell or strut braces, using the click adjustment. Similar to the KW Competition racing suspensions used in international motorsport, the KW V4 Clubsport coilover suspension allows the compression damping to be fine-tuned separately in the low-speed and high-speed range. The click adjustment of the patented KW two-valve control takes place directly on the expansion tank.

You can vary the low-speed compression damping by hand with six precise clicks on the purple-coloured adjustment wheel. The gold-coloured adjustment wheel underneath allows you to change the high-speed compression stage of the recommended basic setup for your track day with 14 exact clicks. Independently of this, you still have 16 clicks at your disposal to noticeably adjust the rebound setting. If you want to tune the KW V4 Clubsport coilover suspension, which is available with an expert opinion, more comfortably for your journey to the Nordschleife or other race track for driving on the motorway, simply reduce the rebound forces via the rebound damping.

- freely adjustable damping technology with 16 precise clicks in the rebound stage
- adjustable compression damping with 6 clicks in the low-speed range and 14 exact clicks in the high-speed range
- infinitely variable lowering
- Tested adjustment range
- high-quality components for a long service life
- unique, independently acting damping force adjustment available with aluminium Unibal support bearings for technically sensible applications

Setup: Application range and damper tuning
The KW V4 Clubsport coilover suspensions impress with their vehicle-specific setup for trackday events on the Nürburgring Nordschleife, as well as the possibility of quickly adapting these suspensions to other racetracks and individual performance sports cars.

Please note the conditions and instructions for this product:
- VA + HA height-adjustable (VA coilover struts, HA springs with height adjustment + dampers)
- Vehicles with electronic damper control must be decommissioned. Vehicle-specific KW decommissioning kits can be found in the accessories table.
- The dampers have easy-to-operate adjustment wheels. Due to the design, the rebound stage can only be adjusted if the piston rod is accessible.
- Clubsport suspension with support bearing: only available with VA support bearing
- V4 / V5 suspension struts / dampers made of aluminium or combined on each axle made of galvanised steel (VA) and aluminium (HA)

Technical information:
Lowering VA/HA (mm): 40-60/40-60
Version: V4 Clubsport
Hardness adjustment: Rebound and compression damping
Material: VA: galvanised steel / HA: aluminium
Adjustment VA/HA: thread/thread
Approval: Parts certificate (§19.3)

Compatible vehicles:
Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive
BMW 2 Series Coupe (G42, G87) 08/2021- 218 i Coupe petrol 115 KW 1998 ccm 4 rear-wheel drive
BMW 2 Series Coupe (G42, G87) 08/2021- 220 d Mild-Hybrid Coupe Diesel/Electric 140 KW 1995 ccm 4 rear-wheel drive
BMW 2 Series Coupe (G42, G87) 08/2021- 220 i Coupe petrol 135 KW 1998 ccm 4 rear-wheel drive
BMW 2 Series Coupe (G42, G87) 08/2021- 230 i Coupe petrol 180 KW 1998 cc 4 rear-wheel drive
BMW 2 Series Coupe (G42, G87) 08/2021- M240 i Coupe petrol 275 KW 2998 ccm 6 rear-wheel drive
BMW 3 Series (G20, G80) G3L 11/2018- 316 d notchback diesel 85 KW 1995 cc 4 rear-wheel drive
BMW 3 Series (G20, G80) G3L 11/2018- 316 d notchback diesel 90 KW 1995 cc 4 rear-wheel drive
BMW 3 Series (G20, G80) G3L 11/2018- 316 d Mild-Hybrid notchback diesel/electric 85 KW 1995 ccm 4 rear-wheel drive
BMW 3 Series (G20, G80) G3L 11/2018- 316 d Mild-Hybrid notchback diesel/electric 90 KW 1995 ccm 4 rear-wheel drive
BMW 3 Series (G20, G80) G3L 11/2018- 318 d notchback diesel 100 KW 1995 cc 4 rear-wheel drive
BMW 3 Series (G20, G80) G3L 11/2018- 318 d notchback diesel 110 KW 1995 ccm 4 rear-wheel drive
BMW 3 Series (G20, G80) G3L 11/2018- 318 d Mild-Hybrid notchback diesel/electric 100 KW 1995 ccm 4 rear-wheel drive
BMW 3 Series (G20, G80) G3L 11/2018- 318 d Mild-Hybrid notchback diesel/electric 110 KW 1995 ccm 4 rear-wheel drive
BMW 3 Series (G20, G80) G3L 11/2018- 318 i notchback petrol 115 KW 1998 ccm 4 rear-wheel drive
BMW 3 Series (G20, G80) G3L 11/2018- 320 d notchback diesel 120 KW 1995 cc 4 rear-wheel drive
BMW 3 Series (G20, G80) G3L 11/2018- 320 d notchback diesel 140 KW 1995 cc 4 rear-wheel drive
BMW 3 Series (G20, G80) G3L 11/2018- 320 d Mild-Hybrid notchback diesel/electric 120 KW 1995 ccm 4 rear-wheel drive
BMW 3 Series (G20, G80) G3L 11/2018- 320 d Mild-Hybrid notchback diesel/electric 140 KW 1995 ccm 4 rear-wheel drive
BMW 3 Series (G20, G80) G3L 11/2018- 320 i notchback petrol 135 KW 1998 ccm 4 rear-wheel drive
BMW 3 Series (G20, G80) G3L 11/2018- 320 i 1.6 notchback petrol 125 KW 1597 ccm 4 rear-wheel drive
BMW 3 Series (G20, G80) G3L 11/2018- 320 Ld notchback diesel 140 KW 1995 cc 4 rear-wheel drive
BMW 3 Series (G20, G80) G3L 11/2018- 330 d notchback diesel 195 KW 2993 cc 6 rear-wheel drive
BMW 3 Series (G20, G80) G3L 11/2018- 330 d Mild-Hybrid notchback diesel/electric 210 KW 2993 ccm 6 rear-wheel drive
BMW 3 Series (G20, G80) G3L 11/2018- 330 i notchback petrol 180 KW 1998 ccm 4 rear-wheel drive
BMW 3 Series (G20, G80) G3L 11/2018- 330 i notchback petrol 190 KW 1998 cc 4 rear-wheel drive
BMW 3 Series (G20, G80) G3L 11/2018- 330 Li notchback petrol 190 KW 1998 ccm 4 rear-wheel drive

Please enter a valid email address.

Your question *

Please enter a valid question.

I agree that my data will be processed to answer the question. I have taken note of the Privacy Policy and agree to the information described therein.*

To continue, enter the characters shown above*

Fields marked with * are mandatory.

There aren't any asked questions yet.

Last seen products

Lowering springs Pro-Kit Performance VA+HA 25mm | fits BMW M3 Competition (G81) S58 | Eibach

Eibach Pro-Kit performance suspension springs for front and rear axle E10-20-049-08-22 The Eibach Pro-Kit lowering springs are the ideal solution for your vehicle, as the kit lowers the centre of gravity, reduces rebound when accelerating, reduces body roll when cornering and dips when braking. As a result, understeer and oversteer no longer occur. Lowering the vehicle with the Pro-Kit springs reduces the standard distance between the tyres and the wheel arch and gives the vehicle a sporty look. In addition, the handling of the vehicle is maximised. The Eibach Pro-Kits are designed by Eibach suspension engineers and test experts to deliver a combination of sporty looks and performance without compromising on safety or ride quality. - Developed and tested for combination with standard and aftermarket dampers- Component of the Eibach Pro system- Top performance handling- Lowers the vehicle's centre of gravity by up to 40 mm (depending on the vehicle)- Spring design for traction and attraction- Progressive suspension characteristics- Performance handling- ABE or parts certificate Note: Only for vehicles without levelling control. Information:- Lowering front axle: approx. 25mm- Lowering rear axle: approx. 5mm- Type of approval: with expert opinion- Suspension: for all standard damping systems- Illustration may differ from the original Compatible vehicles:- Axle load front axle: up to 1165kg- Axle load rear axle: up to 1280kg- EC type approval number: e1*2018/858*00003*..- Only for vehicles without levelling system BMW 3 (G81) Touring M3 Competition 510 hp / 375 KW 7909-ADGBMW 3 (G81) Touring M3 Competition 530 hp / 390 KW 7909-ADT

AED 1,510.42* AED 1,797.40* (15.97% saved)

Rear spoiler Ducktail PSM Carbon | fits BMW 2 Series/M2 incl. Competition/CS (F22/F87) | Aulitzky Tuning

The PSM ducktail made of pre-preg carbon fiber is a rear spoiler that perfectly emphasizes the style of the vehicle. Details:- 100% pure pre-preg carbon fibre construction- OEM style carbon fibre- High gloss finish- Ducktail design- Perfect fit- With parts certificate according to §19.3 Compatible vehicles:- BMW F87 2 Series M2 (2016-2018) - BMW F87 2 Series M2 Competition (2018-2021) - BMW F22 2 Series M235i Coupe (2014-2021) - BMW F22 2 Series M240i Coupe (2014-2021) - BMW F22 2 Series Coupe (2013-2021) Note: This is NOT an original BMW product!

AED 1,008.15*

Side water cooler | fits BMW M3/M4 incl. Competition/CS/GTS (F80/F82/F83) S55 | Wagner Tuning

Suitable for the following models:BMW F80 M3 317kW/431hpBMW F80 M3 Competition 331kW/450hpBMW F80 M3 CS 338kW/460hpBMW F82/F83 M4 317kW/431hpBMW F82/F83 M4 Competition 331kW/450hpBMW F82 M4 CS 338kW/460hpBMW F82 M4 GTS 368kW/500hp With parts certificate! The 3.0 liter S55B30 turbo engine is equipped with an indirect charge air cooling circuit. This means that the charge air is not cooled using the ambient air as a cooling medium (as usual), but with the aid of a separate cooling water circuit. A reduction in the cooling water temperature can therefore be directly equated with an improved cooling performance of the charge air. This is precisely where the advantages of the WAGNERTUNING upgrade water coolers come into play. The newly developed competition racing nets of the WAGNERTUNING high-performance water coolers increase the radiator volume of the standard water coolers by 89% for the front and 94% for the side. The ratio between the inner and outer cooling surface generates maximum heat transfer and at the same time allows the adjacent components (e.g. the engine water cooler located behind it) sufficient air flow for heat exchange. Furthermore, the increased cooling water volume allows the entire system thermal to be kept at a lower level over a longer period of time. All WAGNERTUNING water coolers are equipped with a thermally conductive anti-corrosion coating to ensure a long-lasting cooling effect. The installation of the system is also uncomplicated and plug & play with the help of our installation instructions. Dimensions OEM water cooler (side):250 mm x 165 mm x 40 mmV = 1.65 litersA = 412.5 cm² WT water cooler dimensions (side):252 mm x 188 mm x 68 mmV = 3.2 liters (+94%)A = 473.8 cm² (+14.9%) Scope of delivery:1x side water cooler (low-temperature circuit)1x carbon air duct for the side water cooler1x mounting material1x installation instructions1x parts certificate With parts certificate (for easy registration according to §19 paragraph 3 of the StVZO).

AED 4,516.81*

KW V3 coilover suspension inox | fits Ford Focus Mk2 (DA) 2.5 ST | 35230023

KW V3 coilover suspension Unlimited individuality for performance & comfort. Separate damper force adjustment for rebound and compression damping.As with every KW coilover suspension, our suspension engineers also develop a sporty and harmonious basic set-up for the vehicle-specific applications of the KW V3. In addition to tests on our KW 7-post driving dynamics test bench, we also carry out extensive test drives on country roads, the motorway and even on the Nürburgring Nordschleife, kilometre by kilometre, to guarantee you the perfect suspension set-up. For years, the KW V3, one of the world's top aftermarket products, has been the reference for coilover suspensions. With its damper characteristics, high-quality workmanship and excellent durability, it has impressed discerning sports car drivers, tuners, large and small series manufacturers such as Alpina, MTM, Manthey, Oettinger and many other well-known companies in the international automotive industry. Cutting-edge technology from motorsportYou get much more than a sporty lowering and excellent handling on all roads with the KW V3. It is based on our many years of experience as a suspension manufacturer and supplier in international motorsport, such as in the ADAC GT Masters touring car series, FIA GT1, FIA GT3, International GT Open, WTC, VLN and also in the legendary ADAC Zurich 24h Race Nürburgring.Similar to our racing coilovers from the KW Competition programme, the rebound and compression damping of the KW V3 can be adjusted independently of each other. This individual tuning option is appreciated by tuners, sports car manufacturers, tuners and demanding drivers worldwide. The perfect suspension setup for significantly more driving dynamicsIf you have already carried out initial performance modifications to your sporty road vehicle, it is easy to incorporate these into the damper set-up in a targeted manner with the KW V3. The patented KW valve technology for the separate adjustment of the rebound and compression damping allows you to customise the vehicle-specific basic set-up from KW. For example, the KW bottom valve, which can be adjusted in twelve clicks in the low-speed range of the compression stage, gives you the freedom to even take the tyre characteristics of your high and ultra-high performance road tyres into account in the suspension set-up.Thanks to the patented compression adjustment at the lower piston end of the stainless steel housing, you don't even need any tools. The adjustable compression adjustment with its twelve precise clicks allows you to influence body roll and body roll movements by hand without having to change the rebound damping to match the spring rate.With the individually adjustable rebound damping of the KW V3, you can directly influence the handling and comfort through the exact click adjustment. Depending on the vehicle type, the rebound valves of the KW twin-tube dampers are adjusted at the upper end of the piston rod via an integrated adjustment wheel or the slip-on adjustment wheel included in the scope of delivery.By increasing the rebound force via the adjustment wheel, the body movements on the body are reduced. As a result, your car tracks more accurately and you have even more stability at higher cornering speeds. If, for example, you change from the approved wheel/tyre combinations of your car manufacturer to larger rims, you can use the KW V3 to perfectly match the handling of your car and your new alloy wheels. High-quality, customised and durableThe KW V3 is subjected to extensive quality tests during production and every single damper is checked. This is the only way we can fulfil our claim to provide a warranty of up to five years when a KW coilover suspension V3 is installed by a KW specialist dealer. Due to the filigree workmanship and the use of high-quality components, the KW coilover struts made of stainless steel, for example, are 100 per cent rust-free and have an unlimited service life.This means that the functionality of the stepless lowering system via the dirt-resistant KW trapezoidal thread and the KW polyamide threaded ring is not impaired even after many years. Thanks to the individual lowering with its stepless adjustment range, you can also emphasise the sportiness of your vehicle visually. A feature that is very popular in the performance-orientated tuning scene. - Freely adjustable damping technology in rebound and compression damping- inox-line stainless steel technology- Individual, stepless lowering- Tested adjustment range- high-quality components for a long service life- adjustable rebound damping with 16 exact clicks- 12-way adjustable compression damping with click adjustment- Unique, independently acting damping force adjustment Setup: The individually adjustable rebound & compression damping of the KW V3The KW V3 is the ideal accessory for performance-orientated drivers and tuning enthusiasts who demand a high level of sportiness from their vehicles. The dampers, which are separately adjustable in rebound and compression, allow extensive damper tuning with their sophisticated click adjustment. This makes it easy to directly influence the turn-in behaviour, directional stability, tyre grip and handling characteristics for safe controllability at the limit. Please note the conditions and instructions for this product: - VA + HA height adjustable (VA coilover struts, HA springs with height adjustment + damper) - When used with standard wheel/tyre combinations, additional standard wheel spacers from the accessories may be required Technical information: Lowering VA/HA (mm): 10-40/15-45 Design: V3 Hardness adjustment: Rebound and compression Material: Stainless steel Adjustment VA/HA: Thread/thread Approval: Parts certificate (§19.3) Compatible vehicles: Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive FORD FOCUS II (DA_) 07/2004-09/2013 2.5 ST Hatchback Petrol 166 KW 2522 ccm 5 Front-wheel drive

AED 8,234.50*

Competition Intercooler Kit EVO 3 | fits BMW Z4 sDrive 35i/35is (E89) N54 | Wagner Tuning

The Wagner Tuning intercooler kit EVO III Competition fits the following vehicles with N54 engine:BMW Z4 35i E89 2009+BMW Z4 35is E89 2010+ Experience a groundbreaking increase in performance with the Wagner Tuning EVO III Competition high-performance intercooler. With mesh dimensions of 510 mm x 303 mm x 180 mm and an impressive total volume of 20.65 liters, this intercooler offers a massive 162% larger flow area and an impressive 182% more charge air volume compared to the standard intercooler. The high-quality Tube Fin mesh with internal turbulators ensures optimum cooling and maximum performance. Despite its imposing size, the intercooler impresses with a total weight of just 13.2 kg. The cast aluminium end boxes were optimized using flow analyses in the CFD system to ensure optimum air flow. The result is outstanding cooling properties with minimal back pressure, keeping your E89 running at full speed. The EVO III Competition intercooler kit has been specially developed for the high demands of large tuning stages on the E89. It contains reinforced silicone hoses and eliminates the original click connections. The connection diameters at the inlet and outlet have been extended to Ø70mm to ensure optimum airflow. Each of our intercoolers is coated with a high-quality anti-corrosion coating to ensure a long-lasting and optimal cooling effect. Installation of this completely ready-to-fit kit is child's play. Simply replace the standard intercooler with the EVO III Competition high-performance intercooler - plug-and-play. Please note that due to the extreme size of the radiator, minor adjustments to the radiator support may be required. The EVO III Competition high-performance intercooler has been tested up to 6 bar and is absolutely pressure-stable. The quality of our products is our top priority, which is why all our products are subject to constant quality monitoring. This intercooler is also perfect for racing. Advantages of the Wagner Tuning intercooler:- improved cooling performance- 162% larger inflow area- 182% more charge air volume- Minimal back pressure and flow-optimized- Inlet and outlet have been extended to Ø70mm- Plug & Play Scope of delivery:1 intercooler2 silicone hoses1 mounting material1 assembly instructionAttention: Not approved in the area of the StVZO.

AED 4,516.81*

KW V4 Clubsport coilover suspension | fits BMW 2/3 Series (G42/G20) | 397202CL

Ratenrechner

Ask a question

Previously asked questions