Free shipping
info@aulitzkytuning.ae
+971 50 660 4009

KW V4 coilover suspension | fits Audi RS6/RS7 quattro C7/4G | 3A71000K

AED 0.00*

Delivery time: Availability on request at Aulitzky Tuning*

Optional: Installation on site at Aulitzky Tuning

- Installation and removal of coilover suspension
- Wheel camber correction kit
- Wheel alignment
- Calibration of assistance systems/lights
- Individual suspension tuning according to customer requirements
- Individual test drive and adjustment together with the customer

Assembly at location DE-91564 Neuendettelsau
Reset choice
AED 0.00*
Product number: KW3A71000K
Product information "KW V4 coilover suspension | fits Audi RS6/RS7 quattro C7/4G | 3A71000K"

KW V4 coilover suspension incl. support bearings - State of the Art

With the new KW V4 with its coilover struts made of stainless steel or aluminum, you give your super sports car the necessary reserves to further increase the driving dynamics. The three-way adjustable high-performance dampers with their independent adjustment of the rebound as well as low-speed and high-speed compression damping are based on the successful racing technology of the multiple overall winner of the ADAC Zurich 24h Race Nürburgring and, depending on the vehicle-specific version, have aluminum support bearings. The new KW V4 is developed exclusively for selected high-performance vehicles, which can be moved more safely at the limits of driving dynamics thanks to our KW suspension technology.

- 3-way adjustable high-performance dampers with stainless steel coilover struts
- Separate and independent damper adjustment in:
- Rebound damping with 16 exact clicks + (firmer) / - (more comfortable)
- Low-speed compression damping with 6 exact clicks + (firmer) / - (more comfortable)
- High-speed compression damping with 14 exact clicks + (firmer) / - (more comfortable)
- Two basic settings ex works with comfort setting and performance setting
- Depending on the vehicle, aluminum support bearings are an integral part of the scope of delivery

Please note the conditions and instructions for this product:
- VA + HA height-adjustable (VA coilover struts, HA springs with height adjustment + damper)
- Not for vehicles with level control / air suspension
- Dampers have easy-to-use adjustment wheels. Due to the design, the rebound stage can only be adjusted if the piston rod is accessible.
- Electronic damper control must be deactivated. Electronic kit for decommissioning is included in the scope of delivery.

Technical information:
Lowering VA/HA (mm): 10-35/10-35
Design: V4
Hardness adjustment: Rebound and compression
Material: Stainless steel
Adjustment VA/HA: Thread/thread
Approval: Parts certificate (§19.3)

Compatible vehicles:
Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive
AUDI A6 Avant (4G) 4G5, 4GD, C7 05/2011-09/2018 RS6 performance quattro Kombi Petrol 445 KW 3993 ccm 8 All-wheel
AUDI A6 Avant (4G) 4G5, 4GD, C7 05/2011-09/2018 RS6 quattro estate Petrol 412 KW 3993 ccm 8 All-wheel drive
AUDI A7 Sportback (4G) 4GA, 4GF 07/2010-05/2018 RS7 performance quattro hatchback Petrol 445 KW 3993 ccm 8 All-wheel drive
AUDI A7 Sportback (4G) 4GA, 4GF 07/2010-05/2018 RS7 quattro hatchback Petrol 412 KW 3993 ccm 8 All-wheel drive
For vehicles with DRC

Please enter a valid email address.
Please enter a valid question.
Fields marked with * are mandatory.

There aren't any asked questions yet.
Last seen products

Last seen products

KW V1 coilover suspension inox | fits Audi RS6/Plus quattro C5/B5 | 10210053
KW V1 coilover suspension Sportiness paired with outstanding looks. With factory pre-configured damping.Our entry-level model for more driving pleasure through an appealing and individually adjustable lowering is the KW V1 coilover suspension in the KW typical "inox-line". Thanks to its high-quality workmanship, the consistent use of stainless steel struts, corrosion-resistant springs and harmonised components, it stands for many years of driving pleasure - and not just for the life of the car. Stepless loweringThe KW V1 enables maximum lowering within the tested adjustment range. This varies depending on the vehicle model and can, for example, be between 30 and 70 millimetres or 50 to 90 millimetres for an individual lowering. Thanks to the dirt-resistant trapezoidal thread and the polyamide threaded ring, the stepless lowering can be varied quickly and easily even years later. Depending on the vehicle, the lowering is carried out either on the wheel-guiding KW stainless steel suspension struts or on the rear axle height adjustment for non-wheel-guiding double-wishbone rear axles. The benchmark for sporty, dynamic tuning fansWith its harmonious basic set-up for sporty driving on the road, the KW V1 convinces the discerning tuning fan. Our development engineers determine a specific damper set-up and spring rate for each vehicle in order to increase your driving pleasure with the optimum balance of sportiness and suitability for everyday use. After all, you are not buying just any coilover suspension, but a KW coilover suspension that has been specially developed and tuned for your vehicle type. As a manufacturer, KW only uses its own resources, high-quality components and the same damper technology as mass-produced manufacturers. With the KW V1, the rolling and rolling movements of the vehicle body are reduced during compression, allowing you to benefit from unadulterated directness and sportier handling when driving. Our experience for your driving pleasureAs a manufacturer of customised suspension solutions for road and racing, we have been the market leader and innovation driver for over 25 years. No matter where in the world, sporty drivers, car manufacturers and tuners rely on our KW coilovers "Made in Germany". Every KW coilover suspension is subjected to extensive load tests during production and is developed and manufactured directly at our company headquarters in Fichtenberg, Swabia, in order to fulfil the high standards of our KW quality management. As a German manufacturer, it is a matter of course for us to provide a multi-year warranty on our KW coilover suspension kits, which exceed OEM quality and cover over 4,600 applications. When installed by one of our KW specialist dealers, this warranty is valid for up to five years. - Optimally adjusted in advance- sporty and harmonious damping technology- Stainless steel technology "inox-line"- Individually height-adjustable- Tested adjustment range- Ready-to-install complete solution- High-quality components for a long service life- Complete documentation for easy handling Setup - factory pre-configured damping setupThe KW V1 has a vehicle-specific, permanently configured damper setup. The spring and the damper are perfectly matched to each other so that you experience an optimum balance of sportiness and suitability for everyday use when driving. Even with a full payload and maximum axle loads, the dampers always work with a sporty characteristic curve. The KW V1 is particularly interesting for tuning enthusiasts who prioritise the show & shine concept. Please note the conditions and instructions for this product: - VA + HA height-adjustable (VA threaded struts) Technical info: Lowering VA/HA (mm): 10-30/15-35 Design: V1 Hardness adjustment: none Material: stainless steel Adjustment VA/HA: thread/thread Approval: parts certificate (§19.3) Compatible vehicles: Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive AUDI A6 (4B) 4B2, C5 01/1997-08/2005 RS6 quattro notchback Petrol 331 KW 4172 ccm 8 All-wheel AUDI A6 Avant (4B) 4B5, C5 11/1997-01/2005 RS6 plus quattro estate petrol 353 KW 4172 ccm 8 all-wheel drive AUDI A6 Avant (4B) 4B5, C5 11/1997-01/2005 RS6 quattro estate petrol 331 KW 4172 ccm 8 all-wheel drive

AED 5,910.14*