Free shipping
info@aulitzkytuning.ae
+971 50 660 4009

KW coilover springs | Height-adjustable spring kit | fits Audi RS4 quattro B9 | 253100BU | 253100CF

AED 3,847.98*

Delivery time: Availability on request at Aulitzky Tuning*

Does the vehicle have Dynamic Ride Control (DRC)?
Optional: Installation on site at Aulitzky Tuning

- Ein- & Ausbau der Gewindefedern
- Achsvermessung
- Kalibrierung der Assistenzsysteme/Licht

Assembly at location DE-91564 Neuendettelsau
Reset choice
AED 0.00*
Product number: KW253100BUCF
Product information "KW coilover springs | Height-adjustable spring kit | fits Audi RS4 quattro B9 | 253100BU | 253100CF"

KW coilover springs

The spring set with stepless lowering
KW coilover springs are used to lower the vehicle in combination with the standard dampers. In contrast to conventional spring sets, individual height adjustment is possible within the tested adjustment range. This solution uses vehicle-specific spring mounts with matched KW lowering springs and suitable elastomers as well as dust protection systems. The standard damper system, for example with electronic or hydraulic control, remains active.

Setup - sporty and harmonious spring rates
The high-quality chrome-silicon steel springs used by KW coilover springs are matched to the respective standard suspension dampers and wheel loads in their spring rate for each specific vehicle. When developing the respective spring sets, we ensure that the spring rates also harmonise perfectly with the different damper characteristics of your adaptive standard suspension. So even with a KW coilover spring set, you will experience your car more directly and dynamically. KW coilover springs are suitable for car drivers who want to lower their vehicle discreetly and take advantage of an individual adjustment range.

Stepless lowering
Similar to a coilover suspension, the KW coilover springs allow a stepless lowering in a discreet range. This is not possible with conventional lowering springs. The dust protection elements and spring travel limiters included in the scope of delivery are always adapted to the maximum possible lowering. This means that the height-adjustable KW springs can be used to achieve a sporty, harmonious driving behaviour without compromising the driving dynamics of performance-oriented vehicles.

Please note the conditions and instructions for this product:
- depending on selection not/only for vehicles with electronic damper control
- VA + HA height-adjustable (spring set consisting of VA+HA springs with height adjustment, can only be used with standard dampers)

Technical information:
Lowering VA/HA (mm): 5-25/5-30
HA adjustment: Thread
Approval: Parts certificate (§19.3)
Scope of delivery: Set (VA+HA)

Compatible vehicles:
Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive
AUDI A4 Avant (B9) B8, 8W5 08/2015- RS4 quattro estate petrol 331 KW 2894 ccm 6 all-wheel drive

Please enter a valid email address.
Please enter a valid question.
Fields marked with * are mandatory.

There aren't any asked questions yet.
Last seen products

Last seen products

Wheel bolt 10x M14 x 1.25 x 40mm KE60° black | ST Suspensions
ST wheel nuts & wheel bolts We recommend ST wheel bolts in black for fitting the D1, D2, DZ and DZX systems. The wheel bolts must be selected longer by the thickness of the spacer disc. The type of bolt head and thread must also be taken into account. Important note! The minimum screw-in depth of the wheel bolts must be observed in all cases: - M12x1.25 min. 8.0 turns- M12x1.5 at least 6.5 turns- M12x1.75 at least 6.5 turns- M14x1.25 min. 9.0 turns- M14x1.5 min. 7.5 turns- M15x1.25 min. 10.0 turns- 1/2" min. 8.0 turns Caution:If the wheel bolt is too long, the axle parts may be damaged! Technical information:Item number: 56110259Short description: Wheel bolt M14x1.25x40mm KE60° black (10 pcs.)Colour: blackApproval: Registration-freeScope of delivery: Set (10 pcs.) in boxDesign: Cone 60°Product: Wheel boltThread: M14x1.25Shank length: 40mmKey width: 17mmcollar: tapered collarProduct category: Wheel bolts / Rim locksBrand: ST

AED 81.70*
Rear diffuser Performance OEM Carbon | fits BMW M3/M4 incl. Competition (G80/G81/G82/G83) | Aulitzky Tuning
The Performance rear diffuser made of prepreg carbon fiber is the upgrade for the G8X models. Unlike normal carbon fibre, prepreg carbon is reinforced to increase strength and durability. It can also be an astonishing 70% lighter than other carbon fibre options.Prepreg carbon is far more uniform than other carbon types, meaning the likelihood of imperfections is drastically reduced. The manufacturing process eliminates unwanted air bubbles and results in a perfectly smooth and high-gloss finish. Details:- 100% pure prepreg carbon fibre construction- OEM style fabric- High-gloss finish- With parts certificate according to §19.3 Scope of delivery:- 1x rear wing made from pre-preg carbon fibre Compatible vehicles: - BMW G80 M3 Sedan (2021+) - BMW G80 M3 Competition Sedan (2021+) - BMW G81 M3 Touring (2023+) - BMW G81 M3 Competition Touring (2023+) - BMW G82 M4 Coupe (2021+) - BMW G82 M4 Competition Coupe (2021+) - BMW G83 M4 Convertible (2021+) - BMW G83 M4 Competition Convertible (2021+) Note: This is NOT an original BMW product!

AED 3,091.70*
Rear spoiler Ducktail Performance Carbon | fits BMW 7 Series (G70) | Aulitzky Tuning
The G70 rear spoiler made of Pre-Preg carbon fibre gives your vehicle a distinctly sporty aggressiveness and gives it a lot of presence on the road.Details:- Constructed from 100% pure pre-preg carbon fibre- OEM style weave- High-gloss finish- Perfect fit- registration according to §21 possible Scope of delivery:1x ducktail in prepreg carbon Compatible vehicles:BMW 7 Series G70Note: This is NOT an original BMW product!

AED 1,371.70*
Intake system Carbon | fits BMW M5/M6 (E60/E61/E63) 507hp S85 | Eventuri
Facts: Power increase of up to +15 hp Material: Carbon Manufacturer: Eventuri Parts certificate: A certificate is available for this product for certain regions and vehicles (details below) The Eventuri Carbon Intake System for the E60 and E63 is designed to increase engine performance, improve handling and enhance the overall driving experience. The main aspects are the balance between aerodynamic efficiency and air intake temperature. An open system was chosen but with differences to other aftermarket airboxes. This can be recognised by the shape of the carbon housing and the position and shape of the air filter. The inverted cone-shaped filter, which is also encased in carbon fibre, creates the so-called Venturi effect. The resulting uniform laminar airflow means that a power increase of +15 hp is realistic. The airbox is manufactured using the prepreg carbon fibre process. Parts certificate The manufacturer's specifications apply for installation. An existing certificate is no guarantee that the product can also be installed in the corresponding vehicle. A certificate is available for this product for the following regions and vehicles: * DE/AT: Vehicle registration document, field K --- CH/LI: Vehicle licence, field 24 Country Model Type approval* DE/AT BMW M5 e1*2001/116*0297*.. DE/AT BMW M6 e1*2001/116*0297*.. Compatible vehicles:VehicleVehicle typePowerEngine capacityEngine typeYear of construction BMW 5 Series (E60/E61)M5373kW / 507hp4999cm³S85 B50 A09.04 - 12.10 BMW 6 Series (E63/E64)M6373kW / 507hp4999cm³S85 B50 A09.05 - 08.10

AED 7,649.70*
Cold Air Intake System | passend für Mercedes AMG GT63(S) (290) M177 LS2 4.0L V8 BiTurbo Gen-2 | Blackboost
Cold Air Intake System by BlackBoost. Precision-engineered performance upgrade for Mercedes AMG GT63(S) (290) M177 LS2 4.0L V8 BiTurbo Gen-2. Designed and built by BlackBoost Performance Engineering.

AED 6,275.59*