Lowering springs Pro-Kit Performance VA+HA 20mm | fits BMW Z4 M40i (G29) B58 | Eibach

A powerful brake is one of the most important components in motorsport. With these upgrade kits, the necessary balance of performance, weight and durability has been perfectly combined through the uncompromising selection of materials, so that this product can meet the high demands of extreme automotive applications. To achieve this, MOV'IT has increased the diameter and thickness of the brake discs and used more cross holes. Each pre-cast hole is re-drilled and countersunk to achieve a more favourable flow. The brake disc's optimised DDE ventilation system has an 80% larger surface area compared to other brake discs, resulting in a significant reduction in temperature and wear.Without parts certificate Attention: The conversion means that only rims with at least 19 inches can be fitted! Features: - Upgrade kit front axle, 370mm, 2-piece disc, perforated - Without parts certificate Scope of delivery: - 2x brake disc perforated left/right incl. brake pot - 1x mounting material - 1x installation instructions and running-in instructions Compatible vehicles:Audi R8 (422, 423) 4.2 FSI quattro 309kW / 420PS / 4163cm³ (until 31/08/2009)Audi A4 B7 (8E) RS4 quattro 309kW / 420PS / 4163cm³Audi A6 C5 (4B) RS6 quattro 331kW / 450PS / 4172cm³Audi A6 C5 (4B) RS6 quattro plus 353kW / 480PS / 4172cm³ Notes:When installing the upgrade kit, we always recommend replacing the brake pads, as the use of used pads on new brake discs is not recommended.When installed in our factory, the conversion is carried out exclusively with new brake pads!

To increase strength and durability, prepreg carbon fibre is reinforced in contrast to normal carbon fibre and can still be 70% lighter than other carbon options.A decisive advantage in terms of weight saving. Prepreg carbon fibre is far more consistent in quality, so the likelihood of imperfections is greatly reduced. The manufacturing process eliminates unwanted air bubbles and results in a perfectly smooth and high-gloss finish. Key features:- 100% pure prepreg carbon fibre- OEM style weave- High gloss finish- Fitment guarantee- 1 year warranty- Registration according to §21 possible Scope of delivery:1x SP1 front splitter in prepreg carbon fibre Compatible vehicles:BMW G80 M3 Sedan (2021+)BMW G80 M3 Competition Saloon (2021+)BMW G81 M3 Touring (2023+)BMW G81 M3 Competition Touring (2023+)BMW G82 M4 Coupe (2021+)BMW G82 M4 Competition Coupe (2021+)BMW G83 M4 Convertible (2021+)BMW G83 M4 Competition Convertible (2021+) Note: This is NOT an original BMW product!

KW coilover suspension DDC "Plug & Play" The "Plug & Play" solution for vehicles with standard electronic damper adjustment.KW also offers you the possibility to combine the active standard damper control of your sporty vehicle with the stainless steel KW DDC Plug & Play coilover suspension. This means that you can continue to use the existing active damper control in your vehicle in conjunction with a continuously variable lowering system.The best thing about it: Apart from replacing the adaptive standard suspension with the KW DDC Plug & Play coilover suspension, no further conversion steps or even modifications to the on-board electronics are necessary. The adaptive KW dampers are simply connected to the original connectors of your car manufacturer via the KW DDC plug connection. The standard control unit then takes over the regulation and control of the KW DDC Plug & Play coilover suspension. Perfect symbiosis of an OEM control unit with the advantages of an adaptive KW coilover suspensionOur suspension technology is compatible with the electronics of various car manufacturers. This means that the adaptive KW DDC Plug & Play coilover suspension is immediately recognised by the on-board electronics. All displays and controls of your standard vehicle remain fully functional and combine the advantages of an adaptive damping system with the stylish and sporty lowering of a high-quality KW coilover suspension. Thanks to the exclusive use of rust-free stainless steel and durable components, the functionality of the rust-free KW coilovers is maintained under all weather conditions. Thanks to the dirt-resistant trapezoidal thread and the polyamide threaded ring, adjustment is also possible after a snowy winter, for example. No oxidation occurred on the KW threaded spring legs during a salt spray test. This means that the adjustment of the stepless lowering is not affected even after years. - the plug & play solution for sportiness or more ride comfort at the touch of a button with outstanding looks thanks to stepless lowering- Compatible with the standard suspension control unit- Vehicle-specific damper set-ups such as Comfort / Normal / Sport- Operation via series buttons in the interior Please note the conditions and instructions for this product:- VA + HA height-adjustable (VA coilover struts, HA springs with height adjustment + damper)- Only for vehicles with electronic damper control Technical information:Lowering VA/HA (mm): 30-50/25-55Version: DDC - Plug & PlayHardness adjustment: Rebound and compression dampingMaterial: Stainless steelAdjustment VA/HA: thread/threadApproval: Parts certificate (§19.3) Compatible vehicles:Manufacturer Model Version Body Fuel Performance Displacement Cylinder DriveFORD FOCUS III (DYB_) 07/2010- 2.3 RS AWD Hatchback Petrol 257 KW 2261 ccm 4 All-wheel drive