Panel Filter Pair | fits BMW M5/M6 (F10/F12/F13) 560hp S63 | Eventuri

The high-quality carbon fibre V1 A-Style front spoiler is an excellent addition to significantly enhance the style of your vehicle. Unlike regular carbon fibre, pre-preg carbon is reinforced to increase strength and durability. It can also be a staggering 70% lighter than other carbon fibre options.Prepreg carbon is far more uniform than other types of carbon, meaning the likelihood of imperfections is drastically reduced. The manufacturing process eliminates unwanted air bubbles and results in a perfectly smooth and high-gloss finish. Details:- 100% pure prepreg carbon fibre construction- OEM-style weave- High gloss finish- Fit guarantee- Registration according to §21 possible Scope of delivery:- 1x carbon front splitter Compatible vehicles:BMW G87 2 Series M2 (2023+) Note: This is NOT an original BMW product!

Facts: Power gain: 15-19hp, 13-17ft-lb V-box acceleration: 60-130mph reduced by 0.4 seconds Material: Carbon Manufacturer: Eventuri Expertise: without !!!IMPORTANT!!! The article does not fit on models with auxiliary heating The Audi C7 S6/S7 Eventuri intake system sets a new benchmark for the intake system on this platform. It has been designed to achieve two goals - 1) Relieve the turbo intake paths. 2) Maintain low inlet temperatures. The first objective was achieved by fitting each turbo with a separate filter and venturi funnel to reduce drag and allow the turbos to work more efficiently. The second goal was achieved by enclosing the filters in a carbon air chamber and feeding them with an additional scoop mounted behind the front grille. The engine bay of the C7 RS6/RS7 has multiple heat sources from different directions, so a simple configuration of open filters and shielding would result in higher IAT values. Our carbon airbox housing has been designed to maximise the available volume and block all heat sources. The resulting performance gains and aesthetics are industry leading for the C7 S6/S7. The Eventuri difference The C7 S6/S7 Eventuri system utilises 2 Eventuri funnels mounted on the filters that seamlessly merge into the turbo pipes. These provide an aerodynamically efficient airflow path from the filters to the turbos. Not just another cone filter with a heat shield, but a unique design that creates the Venturi effect and allows laminar flow through the pipes, reducing drag on the turbos. Compatible vehicles:VehicleTypePower outputDisplacementEngineYear of construction Audi A6 (C7)S6 quattro309kW / 420PS331kW / 450PS3993ccCEUCCTGE02.12 - 09.1810.14 - 09.18 Audi A7 (4G)S7 quattro309kW / 420PS331kW / 450PS3993ccCEUCCTGE02.12 - 09.1807.14 - 05.18

Facts: Material: Carbon Manufacturer: Eventuri Parts certificate: For this product a certificate is available for certain regions and vehicles (details below) The Eventuri carbon intake system for Audi B8 RS4 RS5 is designed to increase engine performance, improve handling and enhance the overall driving experience. The main aspects are the balance between aerodynamic efficiency and air intake temperature. An open system was chosen but with differences to other aftermarket airboxes. This can be recognised by the shape of the carbon housing and the position and shape of the air filter, and the airbox is manufactured using the prepreg carbon process. The official parts certificate is currently being prepared and will be available shortly. We will send the documents to all buyers who order in advance. Parts certificate The manufacturer's specifications apply to installation. An existing certificate is no guarantee that the product can also be installed in the corresponding vehicle. A certificate is available for this product for the following regions and vehicles: * DE/AT: Vehicle registration document, field K --- CH/LI: Vehicle licence, field 24 Country Model Type approval* DE/AT Audi RS 4 (B8) e1*xx/xx*0447*.. DE/AT Audi RS 5 (B8) e1*xx/xx*0447*..Compatible vehicles:VehicleTypePowerEngine capacityEngine type Audi A4 (B8/8K)RS4 quattro331kW / 450hp4136cm³CFSA Audi A5 (B8/8T)RS5 quattro331kW / 450hp4136cm³CFSA

The Vorsteiner carbon rear bumper for the Lamborghini Huracan Novara Edizione reduces the weight and improves the aerodynamics of the vehicle. Thanks to its integrated diffuser and its uneven shape, it ensures pressure distribution in the rear area and thus downforce. Made from autoclaved prepreg carbon fibre.Expertise: Material certificate Compatible vehicles:LAMBORGHINI HURACÁN 5.2 LP 580-2 2015-2019LAMBORGHINI HURACÁN 5.2 LP 610-2 Since 2020LAMBORGHINI HURACÁN 5.2 LP 610-4 Since 2014LAMBORGHINI HURACÁN SPYDER 5.2 LP 580-2 Since 2016LAMBORGHINI HURACÁN SPYDER 5.2 LP 610-4 Since 2015

KW coilover springs The spring set with stepless lowering KW coilover springs are used to lower the vehicle in combination with the standard dampers. In contrast to conventional spring sets, individual height adjustment is possible within the tested adjustment range. This solution uses vehicle-specific spring mounts with matched KW lowering springs and suitable elastomers as well as dust protection systems. The standard damper system, for example with electronic or hydraulic control, remains active. Setup - sporty and harmonious spring rates The high-quality chrome-silicon steel springs used by KW coilover springs are matched to the respective standard suspension dampers and wheel loads in their spring rate for each specific vehicle. When developing the respective spring sets, we ensure that the spring rates also harmonise perfectly with the different damper characteristics of your adaptive standard suspension. So even with a KW coilover spring set, you will experience your car more directly and dynamically. KW coilover springs are suitable for car drivers who want to lower their vehicle discreetly and take advantage of an individual adjustment range. Stepless lowering Similar to a coilover suspension, the KW coilover springs allow a stepless lowering in a discreet range. This is not possible with conventional lowering springs. The dust protection elements and spring travel limiters included in the scope of delivery are always adapted to the maximum possible lowering. This means that the height-adjustable KW springs can be used to achieve a sporty, harmonious driving behaviour without compromising the driving dynamics of performance-oriented vehicles. Please note the conditions and instructions for this product: - VA + HA height-adjustable (spring set consisting of VA+HA springs with height adjustment, can only be used with standard dampers) Technical information: Lowering VA/HA (mm): 0-15/0-20 Adjustment VA/HA: Thread Approval: Parts certificate (§19.3) Scope of delivery: Set (VA+HA) Compatible vehicles: Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive AUDI A3 Sedan (GY) 8YS 04/2020- RS3 quattro notchback Petrol 294 KW 2480 ccm 5 All-wheel drive AUDI A3 Sedan (GY) 8YS 04/2020-     RS3 quattro notchback petrol 299 KW 2480 ccm 5 all-wheel drive AUDI A3 Sportback (GY) 8YA 11/2019- RS3 quattro hatchback petrol 294 KW 2480 ccm 5 all-wheel drive AUDI A3 Sportback (GY) 8YA 11/2019- RS3 quattro hatchback petrol 299 KW 2480 ccm 5 all-wheel drive