Rear diffusor Edition 1 Carbon | fits BMW M2 (G87) S58 | Aulitzky Tuning
AED 5,958.57*
Delivery time: approx. 10-14 working days. Exact delivery time on request*.
Finanzieren Sie ihren Einkauf über die Targobank.
×
Ratenrechner
Ihre Monatsraten
6 Monate
Kaufpreis:
Monatliche Rate:
Zinsen:
Gesamtbetrag inkl. Zinsen:
Product number:
ATTNFP-G87-CF-RD001
Product information "Rear diffusor Edition 1 Carbon | fits BMW M2 (G87) S58 | Aulitzky Tuning"
The high-quality Edition 1 rear diffuser made of pre-preg carbon fibre is a great addition that significantly increases the style and aggressiveness of the vehicle.
Unlike regular carbon fibre, pre-preg carbon is reinforced to increase strength and durability.
It can also be a staggering 70% lighter than other carbon fibre options.
Prepreg carbon is far more uniform than other types of carbon, meaning the likelihood of imperfections is drastically reduced.
The manufacturing process eliminates unwanted air bubbles and results in a perfectly smooth and high-gloss finish.
Details:
- 100% pure prepreg carbon fibre construction
- OEM-style weave
- High gloss finish
- Fit guarantee
-
with parts certificate according to §19.3
Scope of delivery:
- 1x rear diffuser incl. moutning material
Compatible vehicles:
BMW M2 G87
Note: This is NOT an original BMW product!
There aren't any asked questions yet.
Last seen products
Last seen products
Front intakes Carbon | fits BMW M2 (G87) S58 | Aulitzky Tuning
AED 2,706.47*
The high-quality front intakes made from Pre-Preg carbon fibre are an excellent addition to significantly enhance the style of your vehicle.
Unlike regular carbon fibre, Pre-Preg carbon is reinforced to increase strength and durability. It can also be a staggering 70% lighter than other carbon fibre options.Prepreg carbon is far more uniform than other types of carbon, meaning the likelihood of imperfections is drastically reduced. The manufacturing process eliminates unwanted air bubbles and results in a perfectly smooth and high-gloss finish.
Details:- 100% pure prepreg carbon fibre construction- OEM-style weave- High gloss finish- Fit guarantee- Registration according to §21 possible
Scope of delivery:- 1x pair of air intakes
Compatible vehicles:BMW G87 2 Series M2
Note: This is NOT an original BMW product!
Front wing flares Carbon | fits BMW M2 (G87) S58 | Aulitzky Tuning
AED 1,803.11*
The high-quality carbon fibre front wing flares are a perfect addition to significantly increase the style of your vehicle.
Unlike regular carbon fibre, pre-preg carbon is reinforced to increase strength and durability. It can also be a staggering 70% lighter than other carbon fibre options.Prepreg carbon is far more uniform than other types of carbon, meaning the likelihood of imperfections is drastically reduced. The manufacturing process eliminates unwanted air bubbles and results in a perfectly smooth and high-gloss finish.
Details:- 100% pure prepreg carbon fibre construction- OEM-style weave- High gloss finish- Fit guarantee- Registration according to §21 possible
Scope of delivery:- 1x carbon wing flares incl. mounting material
Compatible vehicles:BMW G87 2 Series M2 (2023+)
Note: This is NOT an original BMW product!
Carbon intake system | fits Audi RS4/RS5 (B9/8W/F5) 450hp | Eventuri
AED 6,701.29*
Facts:
Power increase: 13-17PS, 15-20ft-lbV box
Acceleration: 60-130mph reduced by 0.5 seconds
Material: Carbon fibre
Manufacturer: Eventuri
Expertise: without
The Audi B9 RS4/RS5 Eventuri intake system is designed to give the turbo a less restrictive airflow while maintaining low inlet temperatures. The RS5/RS4 engine bay is very prone to heat build-up, so simply using an open filter system would result in better airflow at higher inlet temperatures. That's why we've completely redesigned the airflow from the turbo inlet to the front grille with a highly efficient sealed system. The standard restrictive airbox and flexible plastic inlet pipe have been replaced by our patented Venturi filter housing and a duct system with smooth transitions. The convoluted fabric inlet pipe is replaced by our Venturi housing and integrated full carbon pipe, resulting in a smoother airflow as it enters the turbo inlet pipe. The resulting performance gains and aesthetics are industry leading for this platform.
Available with or without optional real carbon fibre air intake.
The improvements result from a combination of reasons:
1) The closed system keeps IATs low - especially with the front air scoop forcing air into the system.
2) The venturi housing provides a smooth transition from the filter to the intake manifold without friction. This helps the turbo to run more efficiently by maintaining laminar flow in the inlet section.
3) The entire system is made of pure pre-preg carbon fibre, which is excellent for thermal insulation.
Included components:
Patented carbon fibre venturi housing with integrated pipe
High flow filter
Generation 2 carbon fibre main air duct with expanding seal
Carbon secondary air inlet
Carbon front air baffle
Laser-cut stainless steel mounting brackets
CNC machined mounting studs
Carbon intake housing construction
The filter housing consists of our customised Generation 2 filter, the carbon housing and the integrated pipe. The carbon housing encloses the rear-mounted filter and gently moulds the airflow downwards to the turbo tube, which corresponds in diameter to the turbo inlet. This is a key feature of the intake concept, where we have eliminated the requirement for a smooth transition to a coiled rubber hose between the intake and the engine. The filter housing and integrated pipe extend to the standard turbo pipe and by mounting to the engine, the entire filter housing moves with the engine. As the engine and filter housing moves under acceleration, it is able to maintain a seal to the duct through an expanding rubber profile fitted to the face of the duct.
This gentle reduction of the cross-sectional area creates the Venturi effect, in which the airflow is accelerated while maintaining laminar conditions. It can be considered as a large funnel. Nice to see in the diagram showing the comparison between our patent pending design and an OEM intake system. Our custom filters assist the airflow through the housings and allow for a smooth velocity profile as the airflow exits the housings.
Carbon main air duct with expanding sealThe duct directs ambient air from the scoop to the filter housing. It also creates a sealed volume of ambient air in front of the filter from which the system can draw air at any time. The duct has been designed to make optimum use of the volume available in the engine compartment. To ensure a good seal against engine compartment heat, the duct is also fitted with a flexible rubber rim around the openings, which presses against the filter housing and the OEM front duct, creating the desired seal while allowing the housing to move with the engine. To further improve airflow, we have an additional opening at the rear of the duct in the cold area of the engine bay.
Compatible vehicles:VehicleTypePower outputEngine capacityEngine size
Audi A4 (B9/8W)RS4 quattro331kW / 450PS2894ccDECA
Audi A5 (B9/F5)RS5 quattro331kW / 450PS2894ccDECA
Coilover springs 25-35/30-45mm | fits BMW M3/M4 Competition xDrive (G80/G82) | 23026-2 | H&R
AED 3,179.83*
H&R coilover springs for G8X models
With their special set-up, H&R coilover springs provide noticeably more performance in everyday driving without any significant loss of comfort.
Details:
Lowering VA: 25-35mm
Lowering HA: 30-45mm
Chassis: for vehicles with electric damper control
Approval type: with parts certificate
Product advantages:
Sporty look and performance
Lowering of the vehicle's centre of gravity
Linear or progressive suspension characteristics
Can be combined with standard or retrofit dampers
Optimised driving dynamics
Surface protection through powder coating
Made in Germany
Compatible vehicles:
BMW M3 Limo xDrive Competition & M4 Coupé xDrive Competition, 4WD *Type G234M (G80 / G82) *only with adaptive M suspension
Competition intercooler kit | fits Subaru Impreza 4 (GJ) WRX STI 300hp | Wagner Tuning
AED 2,854.62*
The Competition intercooler kit is suitable for:Subaru WRX STI 2,5 Turbo 221KW/300hp (2014-)**Not suitable for vehicles with strut brace.
Optimize the performance of your Subaru WRX STI with our Wagner Tuning Competition high performance intercooler!
Our intercooler sets new standards. With net dimensions of 530 mm x 205 mm x 95 mm (10,300 cm³ in total), it offers an impressive 20% larger flow area and a considerable 86% more charge air volume compared to the standard intercooler. This results in a noticeable increase in performance and a better overall driving experience.
Our high performance mesh has been specifically designed to meet the requirements of your Subaru WRX STI. It is a state of the art Tube Fin mesh that provides optimal performance and cooling.
Our cast aluminium end boxes were created in CAD and optimized with CFD simulations to ensure the best possible internal airflow. The result: outstanding cooling performance with constant back pressure compared to the standard intercooler. Our intercoolers are equipped with an anti-corrosion coating that not only protects against environmental influences, but also offers excellent heat dissipation properties. This ensures long-lasting and optimum cooling with a clear increase in performance.
Installation is carried out by replacing the standard intercooler and is simple to perform - a plug-and-play upgrade that delivers immediate results. All our products are subject to strict quality control to ensure you get only the best.
It's time to take the performance of your Subaru WRX STI to a new level. With our Competition high performance intercooler, you can expect more power, better cooling and an overall improved driving experience. Experience the future of performance enhancement. Invest in quality and boost the performance of your Subaru WRX STI with our Competition high performance intercooler!
Advantages of the Wagner Tuning intercooler:- improved cooling performance- 20% larger inflow area- 86% more charge air volume- Optimum cooling- plug-and-play
Dimensions original intercooler:530mm x 170mm x 61,5mmV=5.54 litersA=901 cm²
Dimensions Wagner Tuning intercooler:530mm x 205mm x 95mmV=10.30 litersA=1086 cm²
Scope of delivery:1 intercooler (black coated)1 air duct1 silicone hose (black)1 mounting material1 assembly instructionsAttention: Not approved in the area of the StVZO.
Competition intercooler kit | fits Audi A4/A5 (B9/8W/F5) 3.0TDI/45TDI/50TDI | Wagner Tuning
AED 3,757.98*
The Competition intercooler kit is suitable for the following vehicles:- Audi A4 B9 3,0,0TDI 160-200KW/218-272hp (2015-2018)- Audi A4 B9 45TDI 170KW/231hp (2019+)- Audi A4 B9 50TDI 210KW/286hp (2019-2020) *only suitable for VW EA897evo2 engine- Audi A5 F5 3.0TDI 160-210KW/218-286hp (2017-2018)- Audi A5 F5 45TDI 170KW/231hp (2019+)- Audi A5 F5 50TDI 210KW/286hp (2019-2020) *only suitable for VW EA897evo2 engine
Your Audi A4 B9/A5 F5 deserves only the best, and that's exactly what the Wagner Tuning Competition high-performance intercooler offers.
This masterpiece of German engineering is the key to an impressive performance boost for your vehicle.
With impressive net dimensions of 550 mm x 445 mm x 70 mm (equivalent to 17,130 cc), this intercooler offers a 134% larger flow area and an astonishing 105% more charge air volume compared to the standard intercooler. The competition high-performance network, equipped with internal turbulators, guarantees the highest quality and efficiency.
Although this intercooler is large, it only weighs a light 9.5 kg. The end boxes are made of high-quality cast aluminium and have been optimized using CFD flow analysis to ensure optimum performance. The connection diameters of Ø62 mm at the intercooler inlet and Ø67 mm at the intercooler outlet ensure a smooth airflow. The result is excellent cooling properties with minimal back pressure.
All our intercoolers are equipped with an anti-corrosion coating that not only protects against environmental influences, but also offers excellent heat conduction properties. This guarantees long-lasting and optimum cooling, resulting in an impressive increase in performance. Our intercooler kit is completely ready to install and can be easily replaced with the standard intercooler - plug-and-play. This makes upgrading child's play. With a test up to 6 bar and proven pressure stability, this intercooler is perfect for racing.
Welcome to the future of performance upgrades for your Audi A4 B9/A5 F5. Treat yourself to the Competition high-performance intercooler and feel the difference!Advantages of the Wagner tuning intercooler:- improved cooling performance- 134% larger inflow area- 105% more charge air volume- Connection diameter Ø62 mm at the charge air cooler inlet; Ø67 mm at the charge air cooler outlet- Minimal back pressure- Plug and Play
Mesh original intercooler:720mm x 145mm x 80mmV=8.35 litersA=1044 cm²
Mesh Wagner Tuning intercooler:550mm x 445mm x 70mmV=17.13 litersA=2447 cm²
Scope of delivery:1 intercooler (black coated)1 silicone hose (black)1 mounting material1 assembly instructionsAttention: Not approved in the area of the StVZO.