Free shipping
info@aulitzkytuning.ae
+971581853418

Rear spoiler roof edge SOOQOO Carbon | fits BMW M2/M240i/2 Series (G87/G42) | Aulitzky Tuning

AED 1,586.30*

Delivery time: approx. 10-14 working days. Exact delivery time on request*.

place a request
Product number: ATTNFP-T-526
Product information "Rear spoiler roof edge SOOQOO Carbon | fits BMW M2/M240i/2 Series (G87/G42) | Aulitzky Tuning"

The SOOQOO roof edge spoiler is suitable for the G87 and G42 and enhances the rear by adding a subtle touch of aggression without losing the clean look of the vehicle.

Details:
- 100% pure pre-preg carbon fibre construction
- High gloss finish
- V-design
- Fit guarantee
- Registration according to §21 possible

Compatible vehicles:
- BMW G87 2 Series M2 (2023+)
- BMW G42 2 Series Coupe (2022+)

Note: This is NOT an original BMW product!

Please enter a valid email address.
Please enter a valid question.
Fields marked with * are mandatory.

There aren't any asked questions yet.
Last seen products

Last seen products

Brake system VA 342x28mm 4K | fits Audi S1 (8X), VW Polo WRC (6R) | parts certificate | MOVIT
MOVIT DDE steel brake system 342x28mm (4 piston calliper) for the front axle, from 18 inch rims upwardsApplication-focussed development is the cornerstone of this high-performance brake system. The required balance of weight, performance and durability is optimally combined. The uncompromising selection of materials in production results in a highly unique product that meets the diverse requirements of extreme automotive applications. The most important features of the MOVIT brake system are- The progressive staggering of the piston diameters, matched to the vehicle, so that precisely parallel contact pressure between the pad and the disc is guaranteed. This enables even wear of the brake pads and ensures even heat transfer and a reduced system temperature.- Very good heat dissipation due to the open design of the brake pad contour.- Calipers manufactured from high-strength, highly tempered aircraft aluminium 7075 with high-quality material properties (stiffer components, more homogeneous structure), hard anodised and coated with a triple layer of paint.- Optimised stability due to the length of the callipers- Larger brake disc diameter and thickness, more cross holes (each pre-cast hole is re-drilled and countersunk, which has a favourable effect on the flow).- The brake discs are thermally tempered.- The optimised DDE ventilation system (double directional evolvent system) of the brake disc has an 80% larger surface area compared to other brake discs, the temperature of the brake disc is significantly reduced and therefore also the wear.- Long service life of the wearing parts, excellent response behaviour, steel flex lines ensure consistent performance.- Optimally matched brake pads ensure fading resistance, a long service life and reduced wear on spare parts Attention: The conversion means that only rims with at least 18 inches can be fitted! The chassis number of the vehicle on which the brakes are fitted is required for the parts certificate. MOVIT sports brake callipers, 4s6, 4-piston- Milled from high-strength aircraft aluminium 7075- Two-piece- Use of maximum disc size due to long design- Significantly improved rigidity and extended contact surface of the pad- Uniform heat transfer- Reduced system temperature- Low, even pad wear- Progressive piston staggering- Crown system for fixing the brake hose- RAPAD-X system for quick brake pad replacement without removing the caliper from the bracket- Open brake pad track for optimised cooling- Maximum stability- Maximum braking force MOVIT sports brake discs, 342x28mm, 2-piece- Highly efficient DDE cooling system- Perforated for optimum response behaviour even on wet roads- Maximum fading resistance- Special alloy for high thermal conductivity MOVIT brake pads, comfort BE-4s6- Enlarged friction surface- Lower system temperature- Uniform heat transfer- Longer service life Scope of delivery:2x MOVIT brake caliper (left/right)2x MOVIT brake disc (left/right)2x vehicle-specific brake caliper adapter1x set of comfort brake pads2x steel flex lines1x assembly material1x installation instructions and running-in instructions1x parts certificate Compatible vehicles:Audi S1 8XVW Polo 6R WRC

AED 14,544.12*
Oil cooler guard replacement Carbon | fits BMW M2/M3/M4 incl. Competition (G80/G81/G82/G83/G87) | Aulitzky Tuning
Protect your vehicle's factory oil cooler with the first-class full replacement oil cooler protector made of high-quality carbon fibre. Your vehicle's oil cooler is located directly under the front bumper and is therefore particularly susceptible to damage from bumps in the road. Unlike the standard plastic protectors, which can easily crack and break, this product provides reliable protection for your oil cooler, helping to extend the life of your engine and prevent serious damage to the S58 engine. The durable aluminium protection is designed to reliably fend off scratches and dirt, while hardly affecting the overall weight of your vehicle. Invest in the protection of your engine and extend the life of your vehicle with the full replacement oil cooler guard. When you buy Pre-Preg carbon fibre, you are investing in a higher quality and more durable material that will outlast other forms of carbon fibre and potentially save you money in the long run. Details:- Replaces the OEM plastic guard- Fitment guarantee Scope of delivery:- 1x oil cooler guard including all necessary hardware Compatible vehicles:- BMW G87 M2 - BMW G80 M3 incl. Competition Saloon (2021+)- BMW G81 M3 incl. Competition Touring (2023+)- BMW G82 M4 incl. Competition Coupé (2021+)- BMW G83 M4 incl. Competition Convertible (2021+) Note: This is NOT an original BMW product!

AED 2,598.07*
%
Tip
Aulitzky Exhaust | ECE flap exhaust system 3” (76mm) from OPF | fits Toyota Yaris 1.6 GR (P21) 280hp | PRE-ORDER
This article is only a pre-order! The reduced price is only valid for the time of the pre-order, after that the regular price applies. Facts: - Stainless steel 3 inch (76mm) exhaust system from OPF - tailpipe trims black 101mm - electric flaps - Made in Germany (Lake Constance) - Plug & Play- with ECE approval* Attention: The delivery date of the exhaust system is in January 2026! Scope of delivery: - 1x Aulitzky Exhaust exhaust system from OPF - Tailpipes of your choice - ECE handout Compatible vehicles:VehicleVehicle typePowerEngine capacityEngineYear of constructionToyota Yaris (P21)1.6 GR 4WD206kW / 280hp1618cm³G16E-GTS03.24 - *This flap exhaust system has ECE approval so that it can be used legally within the scope of the StVZO without registration in the vehicle documents.

AED 9,214.29* AED 10,475.38* (12.04% saved)
Tip
Aulitzky Exhaust | ECE downpipe with sports catalyst | fits BMW X3/X4 M40i (G01/G02) 354hp OPF until 10/2019
Facts: - 4.49“ (114mm) > 3” (76mm), replaces the main catalyst - with 200 cell stainless steel sports catalyst - Euro 6 compatible - for current OPF models up to 10/2019 - with Thermo-Integral insulation (for an extra charge) - with ECE approval* Compatible vehicles:VehicleVehicle typePowerEngine capacityEngineYear of construction BMW X3 (G01)xDrive M40i OPF260kW / 354hp2998cm³B58 B30 A05.18 - 10.19 BMW X4 (G02)xDrive M40i OPF260kW / 354hp2998cm³B58 B30 A04.18 - 10.19 Note: Depending on the software version, the engine control light may light up. We recommend the purchase of an OFF set module or software customisation. *This downpipe has ECE approval so that it can be used within the scope of the StVZO without registration in the vehicle documents.

From AED 8,151.93*
KW DDC P&P coilover suspension inox | fits Audi S3 quattro 8Y / Octavia IV NX RS etc. | 39010058
KW coilover suspension DDC “Plug & Play” The “Plug & Play” solution for vehicles that have a standard electronic damper adjustment. KW also offers you the possibility to combine the active standard damper control of your sporty vehicle with the stainless steel KW DDC Plug & Play coilover suspension. In this way, you can continue to use the existing active damper control in your car such as VW Scirocco, VW Golf VI, VW Passat, BMW and other models in conjunction with a stepless lowering. The best thing about it: Apart from replacing the adaptive standard suspension with the KW DDC Plug & Play coilover suspension, no further conversion steps or even modifications to the on-board electronics are necessary. The adaptive KW dampers are simply connected to the original connectors of your car manufacturer via the KW DDC plug connection. The standard control unit then takes over the regulation and control of the KW DDC Plug & Play coilover suspension. Perfect symbiosis of an OEM control unit with the advantages of an adaptive KW coilover suspension Our suspension technology is compatible with the electronics of various car manufacturers. This means that the adaptive KW DDC Plug & Play coilover suspension is immediately recognized by the on-board electronics. All displays and controls of your standard vehicle remain fully functional and combine the advantages of an adaptive damping system with the stylish and sporty lowering of a high-quality KW coilover suspension. Due to the exclusive use of rust-free stainless steel and durable components, the functionality of the rust-free KW coilovers is maintained under all weather conditions. Thanks to the dirt-resistant trapezoidal thread and the polyamide threaded ring, adjustment is also possible after a snowy winter, for example. No oxidation occurred on the KW threaded spring legs during a salt spray test. This means that the adjustment of the stepless lowering is not affected even after years. - the plug & play solution for sportiness or more ride comfort at the touch of a button with outstanding looks thanks to stepless lowering - Compatible with the standard suspension control unit - Vehicle-specific damper setups such as Comfort / Normal / Sport - Operation via series buttons in the interior Please note the conditions and instructions for this product: - VA + HA height-adjustable (VA coilover struts, HA springs with height adjustment + damper) - Only for vehicles with electronic damper control Technical information: Lowering VA/HA (mm): 25-50/25-50 Level change (mm) between: VA and / HA and Version: DDC - Plug & Play Hardness adjustment: Rebound and compression Material: Stainless steel Adjustment VA/HA: Thread/thread Approval: Parts certificate (§19.3) Compatible vehicles: Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive AUDI A3 Sedan (GY) 8YS 04/2020- 40 TDI quattro notchback diesel 147 KW 1968 ccm 4 all-wheel drive AUDI A3 Sedan (GY) 8YS 04/2020- 40 TFSI quattro notchback petrol 140 KW 1984 ccm 4 all-wheel drive AUDI A3 Sedan (GY) 8YS 04/2020- S3 quattro notchback petrol 228 KW 1984 ccm 4 all-wheel drive AUDI A3 Sedan (GY) 8YS 04/2020-     S3 quattro notchback petrol 245 KW 1984 ccm 4 all-wheel drive AUDI A3 Sportback (GY) 8YA 11/2019- 40 TDI quattro hatchback diesel 147 KW 1968 ccm 4 all-wheel drive AUDI A3 Sportback (GY) 8YA 11/2019-     40 TFSI quattro Hatchback Petrol 140 KW 1984 ccm 4 All-wheel drive AUDI A3 Sportback (GY) 8YA 11/2019- S3 quattro Hatchback Petrol 228 KW 1984 ccm 4 All-wheel drive AUDI A3 Sportback (GY) 8YA 11/2019- S3 quattro Hatchback Petrol 245 KW 1984 ccm 4 All-wheel drive CUPRA LEON Sportstourer 10/2020- 2.0 TSI 4Drive Estate Petrol 228 KW 1984 ccm 4 All-wheel drive SKODA OCTAVIA IV (NX3) 01/2020- 2.0 RS Hatchback Petrol 195 KW 1984 ccm 4 Front-wheel drive SKODA OCTAVIA IV (NX3) 01/2020- 2. 0 TDI Hatchback Diesel 147 KW 1968 ccm 4 Front-wheel drive SKODA OCTAVIA IV (NX3) 01/2020- 2.0 TSI RS Hatchback Petrol 180 KW 1984 ccm 4 Front-wheel drive SKODA OCTAVIA IV Combi (NX5) 11/2019- 2. 0 RS Estate Petrol 195 KW 1984 ccm 4 Front-wheel drive SKODA OCTAVIA IV Combi (NX5) 11/2019- 2.0 TDI Estate Diesel 147 KW 1968 ccm 4 Front-wheel drive SKODA OCTAVIA IV Combi (NX5) 11/2019- 2. 0 TSI RS Combi Petrol 180 KW 1984 ccm 4 front-wheel drive VW GOLF VIII (CD1) 07/2019- 1.4 GTE Hatchback Petrol/Electric 110 KW 1395 ccm 4 front-wheel drive VW GOLF VIII (CD1) 07/2019- 1.4 GTE PLUG-IN HYBRID Hatchback Petrol/Electric 132 KW 1395 ccm 4 front-wheel drive

AED 10,264.10*
Tip
Aulitzky Exhaust | ECE downpipe 3,54” (90mm) with sports catalyst | fits BMW X3 M40i (G01) 360hp nonOPF until 05/2018
Facts: - replaces the main catalyst - with 200 cell stainless steel sports catalyst - Euro 6 compatible - for all nonOPF models up to 05/2018 - with ECE approval* Compatible Vehicles:VehicleVehicle typePowerEngine capacityEngineYear of construction BMW X3 (G01)xDrive M40i265kW / 360hp2998cm³B58 B30 A08.17 - 05.18 Note: Depending on the software version, the engine control light may light up. We recommend a software adjustment in this case. *This downpipe has ECE approval so that it can be used within the scope of the StVZO without registration in the vehicle documents.

From AED 8,274.79*