Shroud Cooling Slam Panel Carbon | fits BMW M5 (G90/G99) S68 | Aulitzky Tuning

The ECU battery cover made of pre-impregnated carbon fibre gives your engine compartment an elegant touch.By replacing the standard black plastic cover, you can give your vehicle a personalised touch. When you buy Pre-Preg carbon fibre, you are investing in a higher quality and more durable material that will outlast other forms of carbon fibre and potentially save you money in the long run. Installation: Plug&Play Details:- 100% carbon fibre construction- High gloss finish- registration free Compatible vehicles:- BMW G87 M2 models- BMW G80 M3 Sedan models- BMW G81 M3 Touring models- BMW G82 M4 Coupé models- BMW G83 M4 Convertible models Note: This is NOT an original BMW product!

The Wagner Tuning carbon air intake system fits the following vehicles:Audi RS6 C8 441KW/600hp (2020+)Audi RS7 C8 441KW/600hp (2020+) Discover the new Wagner Tuning carbon fibre air intake system for Audi RS6 and RS7 C8: Maximum performance, breathtaking design! The state-of-the-art Wagner Tuning air intake system has been specially developed for the powerful Audi RS6 and RS7 C8 models and sets new standards in terms of performance and design. Our air intake system replaces the standard system and effectively eliminates its restrictions. Thanks to the flow-optimised carbon cover and the enlarged turbo inlets, the system ensures optimum flow characteristics without blocking or swirling the air supply. The supplied plate filter also ensures a first-class filter effect with minimum pressure loss. By installing our air intake system, the back pressure is reduced by an impressive 38%, resulting in improved response behaviour and an increase in engine performance. In addition to its outstanding performance, our air intake system also impresses with its breathtaking design. The carbon airbox cover and the high-quality components refine the engine compartment and give your vehicle a unique look. Scope of delivery:1 carbon airbox cover1 sports air filter mat2 turbo inlet adapters2 silicone hoses (black)Assembly materialInstallation instructions Boost the performance and style of your Audi RS6 and RS7 C8 with the Wagner Tuning carbon air intake system. Order now and experience the ultimate driving experience!Order now and find out more - your way to unrivalled performance and aesthetics! Attention: Not approved in the area of the StVZO.

Do you want the CRT look but can't find a suitable part? Here is our latest product, the CRT inspired front lip for the E9x. This carbon lip is made from 3K twill weave carbon fibre and 100% real vacuum technology for ultimate lightweight, high durability and fitment. Designed to utilise the OEM mounting position for quick and easy installation. AutoTecknic high performance, air-cooled carbon aero splitters are both highly visible and highly functional. Compatible vehicles:BMW 3 (E90) M3 2007-2011BMW 3 (E90) M3 CRT 2011-2011BMW 3 Convertible (E93) M3 2008-2013BMW 3 Coupe (E92) M3 2007-2013BMW 3 Coupe (E92) M3 GTS 2007-2013

Bitte beachten Sie die Auflagen und Hinweise zu diesem Produkt: - VA + HA höhenverstellbar (VA Gewindefederbeine, HA Federn mit Höhenverstellung + Dämpfer) KW V1 coilover suspension Sportiness paired with outstanding looks. With factory pre-configured damping.Our entry-level model for more driving pleasure through an appealing and individually adjustable lowering is the KW V1 coilover suspension in the KW typical "inox-line". Thanks to its high-quality workmanship, the consistent use of stainless steel struts, corrosion-resistant springs and harmonised components, it stands for many years of driving pleasure - and not just for the life of the car. Stepless loweringThe KW V1 enables maximum lowering within the tested adjustment range. This varies depending on the vehicle model and can, for example, be between 30 and 70 millimetres or 50 to 90 millimetres for an individual lowering. Thanks to the dirt-resistant trapezoidal thread and the polyamide threaded ring, the stepless lowering can be varied quickly and easily even years later. Depending on the vehicle, the lowering is carried out either on the wheel-guiding KW stainless steel suspension struts or on the rear axle height adjustment for non-wheel-guiding double-wishbone rear axles. The benchmark for sporty, dynamic tuning fansWith its harmonious basic set-up for sporty driving on the road, the KW V1 convinces the discerning tuning fan. Our development engineers determine a specific damper set-up and spring rate for each vehicle in order to increase your driving pleasure with the optimum balance of sportiness and suitability for everyday use. After all, you are not buying just any coilover suspension, but a KW coilover suspension that has been specially developed and tuned for your vehicle type. As a manufacturer, KW only uses its own resources, high-quality components and the same damper technology as mass-produced manufacturers. With the KW V1, the rolling and rolling movements of the vehicle body are reduced during compression, allowing you to benefit from unadulterated directness and sportier handling when driving. Our experience for your driving pleasureAs a manufacturer of customised suspension solutions for road and racing, we have been the market leader and innovation driver for over 25 years. No matter where in the world, sporty drivers, car manufacturers and tuners rely on our KW coilovers "Made in Germany". Every KW coilover suspension is subjected to extensive load tests during production and is developed and manufactured directly at our company headquarters in Fichtenberg, Swabia, in order to fulfil the high standards of our KW quality management. As a German manufacturer, it is a matter of course for us to provide a multi-year warranty on our KW coilover suspension kits, which exceed OEM quality and cover over 4,600 applications. When installed by one of our KW specialist dealers, this warranty is valid for up to five years. - Optimally adjusted in advance- sporty and harmonious damping technology- Stainless steel technology "inox-line"- Individually height-adjustable- Tested adjustment range- Ready-to-install complete solution- High-quality components for a long service life- Complete documentation for easy handling Setup - factory pre-configured damping setupThe KW V1 has a vehicle-specific, permanently configured damper setup. The spring and the damper are perfectly matched to each other so that you experience an optimum balance of sportiness and suitability for everyday use when driving. Even with a full payload and maximum axle loads, the dampers always work with a sporty characteristic curve. The KW V1 is particularly interesting for tuning enthusiasts who prioritise the show & shine concept. Please note the conditions and instructions for this product: - VA + HA height-adjustable (VA coilover struts, HA springs with height adjustment + damper) Technical info: Lowering VA/HA (mm): 25-40/20-35 Version: V1 Height adjustment: none Material: stainless steel Adjustment VA/HA: thread/thread Approval: parts certificate (§19.3) Compatible vehicles: Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive FORD FOCUS III (DYB_) 07/2010- 2.0 ST Hatchback Petrol 184 KW 1999 ccm 4 Front-wheel drive FORD FOCUS III (DYB_) 07/2010- 2.0 ST Hatchback Petrol 188 KW 1999 ccm 4 Front-wheel drive FORD FOCUS III (DYB_) 07/2010- 2.0 TDCi ST Hatchback Diesel 136 KW 1997 ccm 4 Front-wheel drive