Silicone hose kit | fits Ford Focus Mk2 ST 225hp | Wagner Tuning

The Wagner Tuning Performance intercooler kit fits the following vehicle:Ford Focus ST MK2 2008-2010 faceliftFord Focus ST MK2 2005-2008 pre-facelift Welcome to the future of performance: The Wagner Tuning Performance high performance intercooler for the Ford Focus MK2. Get ready for a performance revolution in your Ford Focus MK2. Our Performance high performance intercooler sets new standards in cooling and performance. With impressive net dimensions (730mm x 300mm x 70mm = 15.3 liters), this cooler not only offers a generous 100% larger intake area, but also an impressive 125% increase in charge air volume compared to the original intercooler. At the heart of this cooler is our exclusive high performance mesh. It has been developed to ensure optimum airflow and offers outstanding cooling properties. The free-form end boxes, precisely developed in CAD and made of high-quality cast aluminum, ensure the best possible internal airflow. The intercooler offers less back pressure than the standard radiator and has extended connection diameters of 66mm. The kit includes reinforced silicone hoses that are perfectly matched to the new connections. Installation is extremely simple, as our performance intercooler is supplied as a complete kit. Replacement with the standard intercooler is straightforward and requires no complex adjustments. This kit has been tested to up to 6 bar and is absolutely pressure-stable. Our intercooler also has an anti-corrosion coating with outstanding heat conduction properties. This not only guarantees optimum cooling, but also a significant increase in performance for your Ford Focus MK2. Ready to dominate the roads with impressive power? Order now and experience the future of performance technology. Your Ford Focus MK2 will thank you with every acceleration. Advantages of the Wagner Tuning intercooler:- improved cooling performance- 100% larger inflow area- 125% charge air volume- flow-optimized- Lower back pressure- Plug & Play Scope of delivery:1 intercooler2 silicone hoses2 hose clamps1 mounting material1 assembly instruction Attention: Not approved in the area of the StVZO.

The high-quality rear diffuser made of pre-preg carbon fibre is a great addition that significantly increases the style and aggressiveness of the vehicle. Unlike regular carbon fibre, pre-preg carbon is reinforced to increase strength and durability. It can also be a staggering 70% lighter than other carbon fibre options.Prepreg carbon is far more uniform than other types of carbon, meaning the likelihood of imperfections is drastically reduced. The manufacturing process eliminates unwanted air bubbles and results in a perfectly smooth and high-gloss finish. Details:- 100% pure prepreg carbon fibre construction- OEM-style weave- High gloss finish- Fit guarantee- Registration according to §21 possible Scope of delivery:- 1x rear diffuser Compatible vehicles:BMW M2 G87 Note: This is NOT an original BMW product!

The front bumper insert made of pre-preg carbon fiber gives your vehicle a distinctly sporty aggressiveness and makes it stand out on the road.Details:- Constructed from 100% pure pre-preg carbon fibre- OEM style weave- High-gloss finish- Perfect fit- registration according to §21 possible Scope of delivery:1x front bumper insert in prepreg carbon fibre Compatible vehicles:BMW M5 G90BMW M5 G99 TouringNote: This is NOT an original BMW product!

Facts:Acceleration time: 60-130mph reduced by 0.2 secondsMaterial: CarbonManufacturer: EventuriExpert opinion: without The intake system of the 991 Turbo Eventuri has been developed through extensive testing under real world conditions with the aim of making the turbos work more efficiently. By replacing the single standard airbox with individual patented Venturi filter housings, the turbos can spool and generate lift with less drag. As a result, wastegate duty cycles are reduced, resulting in peak boost at lower engine speeds and therefore increased power. The two individual filters provide a larger filter area compared to the single plate filter. To keep intake air temperatures low, the venturi housings are also sealed against an air duct that draws in ambient air from the same location as the stock system. As the engine bay of the 911 Turbo is tightly packed, high IATs can only be avoided by a fully sealed intake system. The Eventuri DifferenceThe 911 Turbo Eventuri system uses our patented carbon fiber housings with our custom Gen 2 filters that provide an aerodynamically efficient airflow path from the filter to the turbos. Not just another cone filter with a heat shield, but a unique design that creates the Venturi effect and maintains laminar flow conditions to reduce drag on the turbo. The intake was tested on the road using a Vbox unit to record acceleration from 60-130mph. The tests were carried out on the same section of road again on the same day to minimize the variables. The results show that acceleration times from 60 to 210mph are reduced by 0.2 seconds when only the intake is added, which is a significant improvement at such speeds. Summary of acceleration results:60-130mph with stock intake = 8.04 seconds60-130mph with Eventuri intake = 7.83 secondsThe advantages result from a combination of reasons:1) Individual venturi housings separate the flow path for each turbo, allowing them to work more efficiently.2) The venturi housings provide a smooth transition from the filter to the intake pipes and keep the airflow laminar.3) Intake air temperatures are kept to a minimum by ensuring a sealed system to prevent heated engine bay air from being drawn in. The intake system of the Eventuri 991 Turbo consists of a number of components designed for a specific purpose and manufactured to the highest standards. Here are the details for each component and the design ethos behind them: Each intake system consists of:2 x Carbon fiber venturi housings with integrated pipes2 x Bespoke high performance Generation 2 filters2 x Aluminum intake coversCarbon fiber intake ductLaser cut stainless steel brackets Compatible vehicles:VehicleVehicle typePowerEngine capacityEngine type Porsche 911 (991.1)3.8 Turbo383kW / 520hp397kW / 540hp3800cm³MA1.71, MDA.BA Porsche 911 (991.1)3.8 Turbo S412kW / 560hp427kW / 580hp446kW / 607hp3800cm³MA1.71, MDB.CA

The Vorsteiner carbon diffuser for the F06/F12/F13 improves the aerodynamics of the vehicle. Thanks to its uneven shape, it ensures pressure distribution at the rear and thus downforce. Made from autoclaved prepreg carbon fibre.Expertise: Material certificate Compatible vehicles:BMW 6 Convertible (F12) M6 2012-2018BMW 6 Convertible (F12) M6 Competition 2013-2015BMW 6 Convertible (F12) M6 Competition 2015-2018BMW 6 Coupe (F13) M6 2012-2017BMW 6 Coupe (F13) M6 Competition 2013-2015BMW 6 Coupe (F13) M6 Competition 2015-2017BMW 6 Gran Coupe (F06) M6 2013-2018BMW 6 Gran Coupe (F06) M6 Competition 2013-2015BMW 6 Gran Coupe (F06) M6 Competition 2015-2018