Sommerfest 13.06.26 Dynorun 18:30
AED 0.00*
Free shipping
Antriebsart Dynorun
Mandatory
Sommerfest Dyno RWD/FWD
Sommerfest Dyno AWD
Finanzieren Sie ihren Einkauf über die Targobank.
×
Ratenrechner
Ihre Monatsraten
6 Monate
Kaufpreis:
Monatliche Rate:
Zinsen:
Gesamtbetrag inkl. Zinsen:
Product number:
AT11467
Product information "Sommerfest 13.06.26 Dynorun 18:30"
Technische Informationen:
- Die Messung erfolgt nach EWG oder DIN Richtlinien
- Angabe der Ergebnisse von PS und NM auf Motor und Achse
- Jede Messung enthält mindestens zwei Messdurchgänge
- Sämtliche Antriebe sind messbar (2WD, 4WD, DSG, Automatik und variable Antriebe)
- Die Messtoleranz beträgt max. 2%
- Leistungen bis 3000 PS messbar Voraussetzungen Eures Fahrzeugs:
- Das Fahrzeug muss straßentauglich sein -
- Das Fahrzeug darf KEINE Winterreifen, defekte oder abgelaufenen Reifen aufgezogen haben.
Alle Infos/ Angaben Haftunsausschluss kommen per Email du wirst im Anschluss der Buchung von uns kontaktiert
- Die Messung erfolgt nach EWG oder DIN Richtlinien
- Angabe der Ergebnisse von PS und NM auf Motor und Achse
- Jede Messung enthält mindestens zwei Messdurchgänge
- Sämtliche Antriebe sind messbar (2WD, 4WD, DSG, Automatik und variable Antriebe)
- Die Messtoleranz beträgt max. 2%
- Leistungen bis 3000 PS messbar Voraussetzungen Eures Fahrzeugs:
- Das Fahrzeug muss straßentauglich sein -
- Das Fahrzeug darf KEINE Winterreifen, defekte oder abgelaufenen Reifen aufgezogen haben.
Alle Infos/ Angaben Haftunsausschluss kommen per Email du wirst im Anschluss der Buchung von uns kontaktiert
There aren't any asked questions yet.
Last seen products
Last seen products
Brake cooling set front + rear axle | fits BMW M2 (F87) | Aulitzky Tuning
AED 2,661.70*
In order to transport the air precisely to the brake system, a suitable inlet is essential.
The F-series already has factory-fitted inlet ducts in the front bumper, but these end in the middle of the wheel arch.
To ensure that the air let in through the inlet ducts of the front bumper is not randomly swirled around in the wheel arch, we have developed an inlet duct that can be fitted with little effort and directs the air precisely to the brakes - i.e. exactly where it is needed.
The covers can optionally be fitted on the outside in front of the ventilation grilles as protection against moisture or similar.
No fastening tools are required for installation on the front axle. They are fitted in exchange for the original duct support. The duct is based on the OEM duct and therefore uses exactly the same connection points and can be completely removed without leaving any residue.
As the inside of the brake disk on the rear axle builds up very high temperatures, we have also developed an air duct here, which guides the air directly into the inside of the rim via a flow channel.
Our brake cooling system is plug & play and requires no modifications to the vehicle.
Scope of delivery:
- 1x set front axle: 2x intake scoop L+R, 6x 3.6mm cable ties for scoop, 2x 4.8mm cable ties for hose holder, 2x hose holder (wheel housing)
- 1x rear axle set: 2 rear air ducts L+R, 8x 4.8mm cable ties
- Brake cooling hoses + anchor plates
Compatible vehicles:
BMW 2 Series (F87) Coupé M2 272kW / 370hp
Attention: Without approval in the area of the StVZO.
Carbon side diffusers | fits BMW M3 incl. Competition (G80/G81) | Aulitzky Tuning
AED 2,145.70*
Made from state-of-the-art pre-preg carbon fibre, these side diffusers for the rear emphasise the character of your vehicle and make it stand out both on the road and online.
Why do we use pre-preg carbon fibre?Unlike normal carbon fibre, pre-preg carbon is reinforced to increase strength and durability.It can also be a staggering 70% lighter than other carbon fibre options, ideal for weight saving.In terms of quality, pre-preg carbon is far more consistent, meaning that the likelihood of imperfections is drastically reduced.of imperfections is drastically reduced.The manufacturing process eliminates unwanted air bubbles and results in a perfect, smooth, sleekand high-gloss finish that is the ultimate piece to complement your vehicle.
When you buy Pre-Preg, you are investing in a higher quality, more durable part that will outlast other forms ofoutlast other forms of carbon fibre and potentially save you money in the long run.
Details:- 100% pure prepreg carbon fibre construction- OEM style weave- High-gloss finish- with parts certificate according to §19.3
Scope of delivery:1x set of side diffusers
Compatible vehicles:- BMW G80 M3 Sedan (2021+)- BMW G80 M3 Competition Sedan (2021+)- BMW G81 M3 Competition Touring (2021+)Note: This is NOT an original BMW product!
Aulitzky Tuning Verkaufsfahrzeug | BMW M2 Competition S55 (F87) Tracktool
AED 294,550.00*
Erste Hand, unfallfrei
Nur Shell V-Power oder Aral Ultimate
Alle Services bei Aulitzky, BMW oder Raab Motorsport durchgeführt. Kein Wartungsstau. Kein Notverkauf.
Fast alle Serienteile sind vorhanden (Sitz, Rücksitzbank, Ansaugung, Auspuff, Fahrwerk, Bremsbeläge…)
TÜV komplett alles eingetragen (außer Bremsbeläge)
- Leistung Aulitzky mit Abstimmung für Rennstrecke. Ca. 520 PS und 700 NM
- Tracktool
- Apple Carplay ganzer Bildschirm
- Aulitzky App inkl. Dongle
- Akrapovic Auspuff ab OPF
- Liteblox Batterie
- Bremsbeläge Pagid RSL29 vorne 70% hinten 95%
- Bremsbelüftung Speed Engineering
- Bremskolben Edelstahl und spezielle Manchetten
- Stahlflexbremsleitung
- Charge und Boost Pipe
- Clubsport Set und Teppich
- CS Frontspoiler org. BMW
- Diffusor org. BMW
- Differential Westwood Performance mit Höherlegungskit
- Display AK-Motion
- Downpipe HJS
- Eventuri Ansaugung
- Fahrwerk KW Clubsport mit Nordschleifenabstimmung Wolfgang Weber
- Felgensatz Protack One 10x19 ET20 und 10,5x19 ET40 mit Continental Sport Contact 7; 265/30/19 und 285/30/19 (80%)
- auf Wunsch zweiter Felgensatz Protack One 10x19 ET20 und 10,5x19 ET40 mit Nankang CR-S; 265/30/19 und 285/30/19 NEU Stehbolzen
- GTS Flash
- Heckspoiler org. BMW
- Hosenträgergurte Schroth
- Kurbelwellensicherung Aulitzky
- Ladeluftkühler Wagner
- Recaro Pole Position inkl. Schiene
- Spurstangen KW
- Stabi VA H&R
- Upgrade Zündspulen und Zündkerzen
- kleiner Achsstand Westwood Performance (Uniball VA und HA)
Das Fahrzeug kann über unsere Hausbank finanziert werden.
Bei Fragen und ernsthaftem Interesse freuen wir uns über eine Kontaktaufnahme.
Boost Controller | passend für MERCEDES 725.0 PERFORMANCE CLUTCH KIT | Blackboost
AED 11,077.40*
Boost Controller by BlackBoost. Precision-engineered performance upgrade for MERCEDES 725.0 PERFORMANCE CLUTCH KIT.
%
Front lip Carbon | fits BMW M3/M4 incl. Competition/CS/GTS (F80/F82) | 3DDesign
AED 6,153.30*
AED 10,255.50*
(40% saved)
The 3DDesign carbon front lip for the F80 and F82 is made entirely of carbon fiber and thus easily meets lightweight construction requirements. Visually, the lip blends in perfectly with the sporty front of the vehicle. In addition, the front lip has a positive effect on the aerodynamic properties of the vehicle.
Incl. parts certificate
Compatible vehicles:BMW 3 (F30, F80) M3 2014-2018BMW 3 (F30, F80) M3 CS 2018-2018BMW 3 (F30, F80) M3 Competition 2016-2018BMW 4 Convertible (F33, F83) M4 2014-2020BMW 4 Convertible (F33, F83) M4 Competition 2016-2020BMW 4 Coupe (F32, F82) M4 2014-2020BMW 4 Coupe (F32, F82) M4 CS 2017-2019BMW 4 Coupe (F32, F82) M4 Competition 2016-2020BMW 4 Coupe (F32, F82) M4 GTS 2016-2019
Intercooler set | fits Porsche 911 (991) Turbo/ S | CSF Race
AED 15,913.87*
Overview:- 15-20°C cooler intake temperatures- 4.5" thick bar and plate core- Wind tunnel optimised core- Aerospace grade thermal dispersion coating- Utilises OEM mounting points and OEM clip settings
Testing was performed on a 2017 991.2 Turbo S with GMG Cat-Back Exhaust, IPD Plenum, IPD Y-Pipe & GIAC Stage 1 Tune. During a power sweep test at 27C ambient, the CSF radiator charge temperature is 33°C and the stock radiator charge temperature is 48°C. The CSF 991 Turbo and Turbo-S intercoolers cool 6°C above ambient and 15°C below OEM. Maximum power increase of 41 bhp at the wheel.
These coolers utilise all of our expert cooling knowledge to deliver an incredibly powerful intercooler solution at a competitive price. During development, CSF engineers designed and tested several core sizes suitable for this application and then settled on a 4.5" thick, wind tunnel optimised bar and plate core. CSF engineers also used a special aerospace-grade thermal dispersion coating to help the intercooler system disperse heat faster.
As always, accuracy of fit is incredibly important. CSF engineers utilise the OEM mounting points, clip adjustments and only require a small amount of trimming of the factory intercooler cover to accommodate the huge intercoolers.
Compatible vehicles:PORSCHE 911 (991) 3.8 Turbo 2013-2020PORSCHE 911 (991) 3.8 Turbo 2016-2020PORSCHE 911 (991) 3.8 Turbo S 2013-2020PORSCHE 911 (991) 3.8 Turbo S 2016-2020PORSCHE 911 (991) 3.8 Turbo S 2017-2020PORSCHE 911 Cabriolet (991) 3.8 Turbo 2013-2020PORSCHE 911 Cabriolet (991) 3.8 Turbo 2016-2020PORSCHE 911 Cabriolet (991) 3.8 Turbo S 2013-2020PORSCHE 911 Cabriolet (991) 3.8 Turbo S 2016-2020