Free shipping
info@aulitzkytuning.ae
+971 50 660 4009

Spark plug set NGK 97506 (SILZKBR8D8S) | BMW N54 N55 S55 (E-series & F-series) | M1/M2/M3/M4 etc.

From AED 429.96*

Delivery time: approx. 3-7 working days*

Number of cylinders
Product number: NGK97506
Product information "Spark plug set NGK 97506 (SILZKBR8D8S) | BMW N54 N55 S55 (E-series & F-series) | M1/M2/M3/M4 etc."

One of the ways in which performance is increased by optimizing the map is by increasing the boost pressure. 
Most people are familiar with the optimization of the environment for the development of boost pressure.
In addition to the mixture of boost pressure and gasoline, the ignition angle also has a massive influence on the vehicle's performance. Therefore, the framework for the development of the ignition spark should also be optimized in any case.
The spark plugs themselves are an important factor here. 
They are divided into different stages with a heat value, which provides information on how the plug absorbs heat and dissipates it from the combustion chamber.
In short, when increasing performance, the heat value of the spark plugs must be adjusted, as a reduction in the heat value is generally accompanied by more stable ignition.

The colder spark plug leads to more power and “healthier” engine running due to the more stable ignition and fewer ignition corrections. The disadvantage of a colder spark plug is slightly poorer idling when cold.

Note:
When converting from original to NGK spark plugs, you must change from three electrodes to one! In principle, this is completely unproblematic, but may require the electrodes to be bent in order to stabilize the spark. The distance between the earth electrode and the center electrode should be discussed individually before the software optimization.

Information:
- Scope of delivery: 4x/6x NGK 97506 unbent
- two steps colder than N54 OEM plugs, one step colder than N55 and S55 OEM plugs

For the N54 we recommend
For power increases up to 500 hp: NGK 95770 bent to 0.4 to 0.55, which corresponds to a colder heat value than the original N54 spark plugs. Bent to 0.55 - the gap should not be smaller than 0.4.
For power increases over 500 hp: NGK 97506 bent to 0.4 to 0.55, which corresponds to two heat values colder than the original N54 spark plugs.

For the N55 we recommend:
For power increases up to around 430hp: Original OEM plugs.
For power increases above 430 hp: NGK 97506 bent to 0.4 to 0.55, which corresponds to two heat values colder than the original N55 spark plugs.

For the S55 we recommend:
For standard performance: 97506 unbent
For Stage 1/ performance upgrades up to 750 hp: NGK 97506 bent to 0.55.

Please note: These are rough guide values which should ideally be confirmed by analyzing your vehicle's log.

As a rule of thumb, the distance between the ground and center electrodes becomes narrower the more power is used. For vehicles with 102 octane, a gap smaller than 0.45 mm is generally not recommended. When using E85 or water methanol, a smaller gap may be useful in some cases.

Comparison numbers for spark plugs from other manufacturers (please check before purchasing!):
BOSCH: 0 242 145 517
BOSCH: ZMR 5 TPP 33
BMW: 0 037 581
BMW: 12 12 0 037 581
BMW: 12 12 0 039 664 
MINI: 12 12 0 037 581
MINI: 0 037 581

Compatible vehicles:
BMW models with N54, N55 or S55 engines such as:
BMW 1 Series (E82) Coupé | 09/2007-10/2013
BMW 1 Series (E88) Convertible | 09/2007-10/2013
BMW 1 Series (F20) | 07/2011-06/2019
BMW 1 Series (F21) | 12/2011-12/2019
BMW 2 Series (F22, F87) Coupé | 10/2012-06/2021
BMW 2 Series (F23) Convertible | 03/2014-06/2021
BMW 3 Series (E90) | 12/2004-02/2012
BMW 3 Series (E91) Touring | 12/2004-12/2012
BMW 3 Series (E92) Coupé | 03/2006-12/2013
BMW 3 Series (E93) Convertible | 05/2006-12/2013
BMW 3 Series (F30, F80) | 11/2011-10/2018
BMW 3 Series (F31) Touring | 07/2012-06/2019
BMW 3 Series (F34) Gran Turismo | 07/2012-
BMW 4 Series (F32, F82) Coupé | 07/2013-05/2021
BMW 4 Series (F33, F83) Convertible | 10/2013-09/2020
BMW 4 Series (F36) Gran Coupé | 03/2014-05/2021
BMW 5 Series (F07) Gran Turismo | 01/2009-02/2017
BMW 5 Series (F10) | 01/2009-10/2016
BMW 5 Series (F11) Touring | 01/2009-02/2017
BMW 6 Series (F06) Gran Coupé | 03/2012-10/2018
BMW 6 Series (F12) Convertible | 12/2010-06/2018
BMW 6 Series (F13) Coupé | 07/2011-10/2017
BMW 7 Series (F01, F02, F03, F04) | 02/2008-12/2015
BMW X3 (F25) | 09/2010-12/2017
BMW X4 (F26) | 05/2013-03/2018
BMW X5 (E70) | 02/2006-07/2013
BMW X5 (F15/F85) | 08/2013-07/2018
BMW X6 (E71/E72) | 06/2007-12/2015
BMW X6 (F16, F86) | 08/2014-07/2019

Please enter a valid email address.
Please enter a valid question.
Fields marked with * are mandatory.

There aren't any asked questions yet.
Last seen products

Last seen products

Shroud Cooling Slam Panel Carbon | fits BMW M2/M3/M4 incl. Competition (G80/G81/G82/G83/G87) | Aulitzky Tuning
Transform the engine bay of your G8X with the pre-impregnated carbon replacement radiator shroud. Made from lightweight pre-preg carbon fibre. When you buy pre-preg carbon fibre, you are investing in a higher quality and more durable material that will outlast other forms of carbon fibre and potentially save you money in the long run. Assembly: Plug&Play Details:- 100% carbon fibre construction- High gloss finish- Performance style design- Supplied with 3M double-sided adhesive tape already attached- Use rubber adapter from the original engine cover + emblem- registration free Compatible vehicles with S58 engine:- BMW G87 M2 - BMW G80 M3 Sedan (2021+)- BMW G80 M3 Competition Sedan (2021+)- BMW G81 M3 Touring (2023+)- BMW G81 M3 Competition Touring (2023+)- BMW G82 M4 Coupé (2021+)- BMW G82 M4 Competition Coupé (2021+)- BMW G83 M4 Convertible (2021+)- BMW G83 M4 Competition Convertible (2021+) Note: This is NOT an original BMW product!

AED 2,575.70*
Mirror covers Carbon | fits BMW M5/5er/7er/i7 (G90/G99/G60/G61/G68/G70) | Aulitzky Tuning
The exterior mirror covers in glossy pre-preg carbon fibre give your standard mirror units a more premium look. Unlike regular carbon fibre, Pre-Preg carbon is reinforced to increase strength and durability. It can also be a staggering 70% lighter than other carbon fibre options.Prepreg carbon is far more uniform than other carbon types, meaning the likelihood of imperfections is drastically reduced. The manufacturing process eliminates unwanted air bubbles and results in a perfectly smooth and high-gloss finish. Details:- 100% pure prepreg carbon fibre construction- OEM-style weave- High gloss finish- Guaranteed fit- registration free Scope of delivery:- 1x pair of mirror caps Compatible vehicles:BMW M5 (G90)BMW M5 (G99)BMW 5 Series (G60)BMW 5 Series (G61)BMW 5 Series (G68)BMW i5 (G60)BMW 7 Series (G70) Note: This is NOT an original BMW product!

AED 2,360.70*
Centre console cover rear seat Carbon | passend für BMW M2/M4 (F87/F82/F83/G87) | Aulitzky Tuning
The Centre console cover for the rear seat made of pre-preg carbon fiber perfectly emphasize the style of the vehicle.Details:- 100% pure pre-preg carbon fibre construction- OEM style carbon fibre- High gloss finish- Perfect fit- Registration free Compatible vehicles: - BMW F80 M3 - BMW F82 M4 Coupe - BMW F83 M4 Cabrio - BMW F87 M2 - BMW F87C M2 - BMW G87 M2  Note: This is NOT an original BMW product!

AED 855.70*
Turbo outlet | fits VAG 2.0TSI EA888 Gen.4 Golf 8 GTI, TT 8S, Octavia NX RS, Formentor VZ etc. 245hp | Wagner Tuning
Suitable for the following vehicles:Audi TT 8S 45 TFSI 2.0 TSI (EA888 Gen.4 DNP) 180kW / 245hpVW Golf VIII Type CD2.0 GTI (EA888 Gen.4 DNP) 180kW / 245hpVW Tiguan AD (FL) 2.0 TSI (EA888 Gen.4 DNP) 180kW / 245hpSkoda Octavia NX 2.0 TSI RS (EA888 Gen.4 DNP) 180kW / 245hpSkoda Kodiaq 2.0 TSI RS (EA888 Gen.4 DNP) 180kW / 245hpCupra Leon KL 2.0 TSI (EA888 Gen.4 DNP) 180kW / 245hpCupra Formentor VZ 2.0 TSI (EA888 Gen.4 DNP) 180kW / 245hp The Wagner Tuning Turbo Outlet has been specially developed for vehicles with the EA888 Gen.4 engine and Garrett turbocharger to optimise performance and response. With an innovative design and high-quality materials, this turbo outlet offers a plug-and-play solution for a wide range of vehicle models, including Audi, VW, Skoda and Seat. The Wagner Tuning Turbo Outlet is the ideal choice for discerning vehicle enthusiasts who want to get maximum power and performance from their vehicles.Optimised air mass flow: The Turbo Outlet has been developed using CFD flow simulations to maximise air mass flow and increase performance. Plug-and-play installation: Easy installation thanks to the plug-and-play design that allows direct replacement of the standard part. Reduction of turbulence: By increasing the internal diameter to Ø48mm, turbulence is minimised, resulting in improved airflow and optimised responsiveness. High-quality materials: CNC-machined from high-strength aluminium alloy and anodised black for durability and aesthetics.Made in Germany: Manufactured in Germany to the highest quality standards. Scope of delivery:1 x Turbo outlet (exhaust nozzle) With parts certificate (for easy registration according to §19 paragraph 3 of the StVZO).

AED 516.00*
Mudguard Trim Grille Carbon | fits BMW M3 incl. CRT/GTS (E90/E92/E93) S65 | AutoTecknic
AutoTecknic Carbon Mudguard Grill for E92 Compatible vehicles:BMW 3 (E90) M3 2007-2011BMW 3 (E90) M3 CRT 2011-2011BMW 3 Convertible (E93) M3 2008-2013BMW 3 Coupe (E92) M3 2007-2013BMW 3 Coupe (E92) M3 GTS 2007-2013

AED 941.70*