WIFI OBD Dongle for The Aulitzky App “do it yourself” | Aulitzky Tuning

Your 5 Series is missing a data display! Here we present the data display for the E28. Access to all data from the engine control unit:So ALL. The sensors are queried directly via CanBus and are displayed on our tried and tested MFD28. The display comes with a vehicle-specific panel and fits into the interior like an original part. The ventilation remains intact through the slots. The sensors are queried by the CanBus via the manufacturer-specific protocol. We have optimized the protocol to achieve maximum polling speed. Details:- integrates perfectly into the vehicle interior- Up to 128 sensors can be queried- 10 individually configurable views with our DSS - Display Setup Software- ready-made views for a quick start with our display- simply plug and play via our cable set - plug in, done- 4 additional analog inputs for exhaust gas temperature, oil pressure and more- Best readability - optional anti-reflective film included- Query the sensors like manufacturer diagnostic tools Performance meter:Measure your acceleration times in our performance widget - 0-100, 100-200, 0-200 Data jogging:Log all data to the internal SD card. Whether “on-demand” (start with a tap) or permanent. All data from your last turn is saved. Preset Alarms:Preset alerts can be easily activated and also customized. For example, receive a large warning message if the exhaust gas temperature is above 900 degrees. 4 additional analog inputs:Additional temperature and/or pressure sensors can be connected for further monitoring options. e.g. exhaust gas temperature or exhaust gas back pressure. An ethanol sensor can be connected to one of the digital inputs. Read out/delete errors:Read out errors from the engine control unit in plain text and also delete them Individual designWhether it's the individual start screen or the selection from a variety of different widgets. Make the display your display! Access to all data from the engine control unit:We supply your display with a ready-made TRI file as standard. All sensors that are queried are defined here. Temperatures:Engine water temperature, intake temperature, exhaust temperature, transmission temperature Pressures:Boost pressure, ambient pressure, oil pressure Lambda/mixture:Lambda value target/actual, short-term lambda adjustment, long-term lambda adjustment, MAF, engine load, torque Driver dynamics:Brake pressure, vehicle speed, throttle angle/gas pedal position Other:RPM, total ignition angle, gear, battery voltage, ignition angle reduction per cylinder Analog inputs:Additional sensors can be added here: Oil temperature, fuel pressure, oil pressure, exhaust gas temperature, etc. but also an ethanol sensor (Flex Fuel) If values are missing, they can easily be added. ATTENTION: not every engine offers all values! For which engines and models is the display:The display panel fits all E28 vehicles with M30 or S38 engine (LHD). MFD28 Technical data:- Dimensions: 70.3 x 52mm - Hardware: 2.8” TFT screen, touchscreen, MicroSD, MicroUSB- High-quality milled aluminum front frame- Symmetrical display - ideal for rotating it by 90- Views completely freely configurable on the PC with our DSS - Display Setup Software- Up to 64 widgets per display- 64 sensors (Can Bus + internal)- 10 views- 4x analog inputs- Optional external switching flash- Can bus switching- Can Bus protocols: UDS, KWP2000, OBD Supported values:Many KViele customers always ask: “Which values can I query from my control unit”. The answer: “ALL”. Our MFD28 is compatible with ISO 11898-2 and SAE J2284.The control unit manufacturers themselves determine which values are sent via the CAN bus interface. The documentation is important here - possibly even in the form of a DBC file that can be imported directly. You can also access our extensive list of already implemented control units. This can be found in the download area. A total of up to 50 sensors can be queried if the manufacturer supports this.Broadcast data as well as OBD2 queries via Can Bus (11bit/29bit) are implemented. Special protocols such as TP2.0 from VW/Audi and UDS are also available. DSS - Display Setup Software:With our DSS - Display Setup Software, the display can be conveniently configured on the PC. The Can Bus protocol can be customized, you can import DBC files and design the displays with your own widgets.The log viewer downloads log files from the display. These can then be viewed and values can be individually selected and scaled.A built-in Can Bus logger makes it possible to take a close look at the log. This can be used to reverse-engineer unknown Can Buses.

The Competition Intercooler Upgrade Kit is suitable for:Audi Q5 2,0TFSI (CDNB; CNBC) 2009-2015 132KW/180hpAudi Q5 2,0TFSI (CDNC) 2008-2012 155KW/211hpAudi Q5 2.0TFSI (CNCD) 2012-2015 165KW/225hp Maximum performance, minimum effort: Our Wagner Tuning high-performance intercooler kit Are you dreaming of an enormous increase in performance for your vehicle? Our high performance intercooler kit will make this dream a reality. Designed for enthusiasts who don't want to compromise on performance, our kit offers revolutionary technology in an impressively compact design. This high performance charge air cooler exceeds all expectations. With net dimensions of 610mm x 440mm x 65mm and a net volume of 17.446 liters, it offers a staggering 178% larger flow area and an astonishing 158% more charge air volume compared to the stock intercooler. The result? An explosive increase in power and an impressive cooling capacity. Our intercooler is equipped with a high-quality Tube Fin mesh that uses internal turbulators to optimize airflow. Despite its impressive size, this cooler weighs just 9.1 kg, meaning you get more power without the extra weight. Our cast aluminium end boxes were developed in the CAD system and optimized with CFD simulations to perfect the internal air flow. An integrated air guide in the end box ensures even filling of the high-performance mesh. The connection diameters have been extended to Ø67mm, which is why our kit includes reinforced silicone hoses. Installation is a breeze, as you can simply replace the standard intercooler. No complex adjustments required. Our intercoolers are equipped with an anti-corrosion coating that not only protects against environmental influences, but also offers excellent heat conduction properties. This ensures constant and optimum cooling performance, accompanied by a significant increase in performance. Our products are suitable for racing and have been tested to withstand pressures of up to 6 bar to offer you reliability at the highest level. Quality is our top priority. All our products are subject to rigorous quality control to ensure they meet the highest standards. Realize your performance dreams with our Wagner Tuning high performance intercooler kit. Get the most out of your vehicle now! Advantages of the Wagner Tuning intercooler:- improved cooling properties- 178% larger inflow area- 158% more charge air volume- Connection diameter extended to Ø67mm- simple installation Scope of delivery:1 intercooler2 charge air hoses4 hose clamps1 mounting material1 assembly instruction Attention: Not approved in the area of the StVZO.

Suitable for the following models: BMW 2 Series (F22) Coupe M2 (F87) Aerodynamic wing for the F22 and F87. The wing can be adjusted in three stages to adapt to different routes. Adjustment takes seconds and requires no tools. Objective: Stabilises straight-line stability and cornering at high speeds. - Made from cnc-milled aluminium parts and high-quality carbon - Finish: polished visible carbon | black anodised aluminium - three-way adjustable - incl. mounting material - very easy to fit - with ABE

The rear wing from RKP was designed as a flawless replica of the F82 wing and represents not only the shape of the wing, but also the construction, the material quality and above all the mounting and assembly technology.RKP remains the only manufacturer in the world that pays the highest attention to installation hardware and offers hardware that exactly matches the original BMW hardware, resulting in a perfect fit and the installation process of the original equipment. RKP's M4 GTS wing includes aluminum wing supports, all necessary stamped aluminum hardware to securely mount the wing to the inside of the trunk, and most importantly a full carbon fiber wing body and end plates. Vehicles built prior to January 15th will need to purchase new newer style trunk hinges**. Compatible vehicles:BMW M4 317kW/431hpBMW M4 Competition 331kW/450hpBMW M4 CS 338kW/460hpBMW M4 GTS 368kW/500hp The article has the following certificate: Material certificate