Aulitzky Exhaust | Downpipe 3.54“ / 2.76” (90/70mm) | fits Audi RS3 8V quattro 367hp | Parts certificate

Facts: - replaces the main catalyst - with 2x 100 cell stainless steel sports catalyst - Euro 6 compatible - for non-OPF vehicles - without approval in the area of the StVZO Compatible vehicles:VehicleVehicle typePowerEngine capacityEngineYear of construction AudiS6 quattro (4G)309kW / 420hp3993cm³CEUC02.12 - 09.18 AudiS6 quattro (4G)331kW / 450hp3993cm³CTGE10.14 - 09.18 AudiRS6 quattro (4G)412kW / 560hp3993cm³CRDB, CWUB01.13 - 09.18 AudiRS6 performance quattro (4G)445kW / 605hp3993cm³CWUC11.15 - 09.18 AudiS7 quattro (4G)309kW / 420hp3993cm³CEUC02.12 - 03.15 AudiS7 quattro (4G)331kW / 450hp3993cm³CTGE07.14 - 05.18 AudiRS7 quattro (4G)412kW / 560hp3993cm³CRDB, CWUB10.13 - 04.18 AudiRS7 performance quattro (4G)445kW / 605hp3993cm³CWUC11.15 - 04.18 Note: Depending on the software version, the engine control light may light up. We recommend a software adjustment in this case.

Facts: Performance increase with up to 15 hp Material: Carbon Manufacturer: Eventuri Parts certificate: A certificate is available for this product for certain regions and vehicles (details below) Big cars - big intakes. With the intake system for the Audi RS6/RS7 C7, Eventuri sets new standards in precision and efficiency not only for itself but for the industry. Thanks to the two patented Eventuri air filters, the air flow is channelled laminar and without turbulence directly into the turbos. In addition to the rich sound of the intake, the Audi RS6/RS7 C7 intake comes with a significant increase in performance of up to 15 hp. The two-part, large heat shield ensures optimum shielding of the air flow from the engine heat. The heat shield cools itself through a small air slot between the insulating plates. The ingenious, fluid processing of the scoop for the air intake and the seamless transition into the patented Eventuri housing made of full carbon fibre ensure an individual and captivating look. The Eventuri intake for the Audi RS6/RS7 C7 comes in the following components: Carbon filter housing with integrated inlet pipe 2 efficient high-flow cones with urethane filter Carbon scoop Carbon filter cover CNC milled mount for the mass air flow sensor 2-piece main heat shield Laser-cut suspension The well-known Venturi effect is enhanced by Eventuri's technically ingenious product design. The alignment of the airflow through the elegant scoop creates a suction as it enters the filter housing through the filter, which compresses the airflow perfectly and directs it into the turbo. The optimised airflow then ensures a significant uplift in engine performance. Parts certificate The manufacturer's specifications apply to installation. An existing certificate is no guarantee that the product can also be installed in the corresponding vehicle. A certificate is available for this product for the following regions and vehicles: * DE/AT: Vehicle registration document, field K --- CH/LI: Vehicle licence, field 24 Country Model Type approval* DE/AT Audi RS6 (4G) e1*2007/46*0544*.. DE/AT Audi RS7 (4G) e1*2007/46*0544*.. Compatible vehicles:VehicleVehicle typePowerEngine capacityEngine typeYear of construction Audi A6 (C7)RS6 quattro412kW / 560hp3993cm³CRDB, CWUB01.13 - 09.18 Audi A6 (C7)RS6 performance quattro445kW / 605hp3993cm³CWUC11.15 - 09.18 Audi A7 (4G)RS7 quattro412kW / 560hp3993cm³CRDB, CWUB10.13 - 04.18 Audi A7 (4G)RS7 performance quattro445kW / 605hp3993cm³CWUC11.15 - 04.18

KW coilover springs The spring set with stepless lowering KW coilover springs are used to lower the vehicle in combination with the standard dampers. In contrast to conventional spring sets, individual height adjustment is possible within the tested adjustment range. This solution uses vehicle-specific spring mounts with matched KW lowering springs and suitable elastomers as well as dust protection systems. The standard damper system, for example with electronic or hydraulic control, remains active. Setup - sporty and harmonious spring rates The high-quality chrome-silicon steel springs used by KW coilover springs are matched to the respective standard suspension dampers and wheel loads in their spring rate for each specific vehicle. When developing the respective spring sets, we ensure that the spring rates also harmonise perfectly with the different damper characteristics of your adaptive standard suspension. So even with a KW coilover spring set, you will experience your car more directly and dynamically. KW coilover springs are suitable for car drivers who want to lower their vehicle discreetly and take advantage of an individual adjustment range. Stepless lowering Similar to a coilover suspension, the KW coilover springs allow a stepless lowering in a discreet range. This is not possible with conventional lowering springs. The dust protection elements and spring travel limiters included in the scope of delivery are always adapted to the maximum possible lowering. This means that the height-adjustable KW springs can be used to achieve a sporty, harmonious driving behaviour without compromising the driving dynamics of performance-oriented vehicles. Please note the conditions and instructions for this product: - Not for vehicles with level control / air suspension - VA + HA height-adjustable (spring set consisting of VA+HA springs with height adjustment, can only be used with standard dampers) Technical information: Lowering VA/HA (mm): 5-30/15-40 Adjustment HA: Thread Approval: Parts certificate (§19.3) Scope of delivery: Set (VA+HA) Compatible vehicles: Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive AUDI A6 Avant (4G) 4G5, 4GD, C7 05/2011-09/2018 RS6 performance quattro Kombi Petrol 445 KW 3993 ccm 8 All-wheel drive AUDI A6 Avant (4G) 4G5, 4GD, C7 05/2011-09/2018 RS6 quattro Estate Petrol 412 KW 3993 ccm 8 All-wheel drive AUDI A7 Sportback (4G) 4GA, 4GF 07/2010-05/2018 RS7 performance quattro Hatchback Petrol 445 KW 3993 ccm 8 All-wheel drive AUDI A7 Sportback (4G) 4GA, 4GF 07/2010-05/2018 RS7 quattro Hatchback Petrol 412 KW 3993 ccm 8 All-wheel drive

KW V4 coilover suspension incl. support bearings - State of the Art With the new KW V4 with its coilover struts made of stainless steel or aluminum, you give your super sports car the necessary reserves to further increase the driving dynamics. The three-way adjustable high-performance dampers with their independent adjustment of the rebound as well as low-speed and high-speed compression damping are based on the successful racing technology of the multiple overall winner of the ADAC Zurich 24h Race Nürburgring and, depending on the vehicle-specific version, have aluminum support bearings. The new KW V4 is developed exclusively for selected high-performance vehicles, which can be moved more safely at the limits of driving dynamics thanks to our KW suspension technology. - 3-way adjustable high-performance dampers with stainless steel coilover struts - Separate and independent damper adjustment in: - Rebound damping with 16 exact clicks + (firmer) / - (more comfortable) - Low-speed compression damping with 6 exact clicks + (firmer) / - (more comfortable) - High-speed compression damping with 14 exact clicks + (firmer) / - (more comfortable) - Two basic settings ex works with comfort setting and performance setting - Depending on the vehicle, aluminum support bearings are an integral part of the scope of delivery Please note the conditions and instructions for this product: - VA + HA height-adjustable (VA coilover struts, HA springs with height adjustment + damper) - Not for vehicles with level control / air suspension - Dampers have easy-to-use adjustment wheels. Due to the design, the rebound stage can only be adjusted if the piston rod is accessible. - Electronic damper control must be deactivated. Electronic kit for decommissioning is included in the scope of delivery. Technical information: Lowering VA/HA (mm): 10-35/10-35 Design: V4 Hardness adjustment: Rebound and compression Material: Stainless steel Adjustment VA/HA: Thread/thread Approval: Parts certificate (§19.3) Compatible vehicles: Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive AUDI A6 Avant (4G) 4G5, 4GD, C7 05/2011-09/2018 RS6 performance quattro Kombi Petrol 445 KW 3993 ccm 8 All-wheel AUDI A6 Avant (4G) 4G5, 4GD, C7 05/2011-09/2018 RS6 quattro estate Petrol 412 KW 3993 ccm 8 All-wheel drive AUDI A7 Sportback (4G) 4GA, 4GF 07/2010-05/2018 RS7 performance quattro hatchback Petrol 445 KW 3993 ccm 8 All-wheel drive AUDI A7 Sportback (4G) 4GA, 4GF 07/2010-05/2018 RS7 quattro hatchback Petrol 412 KW 3993 ccm 8 All-wheel drive For vehicles with DRC

A powerful brake is one of the most important components in motorsport. With these upgrade kits, the necessary balance of performance, weight and durability has been perfectly combined through the uncompromising selection of materials, so that this product can meet the high demands of extreme automotive applications. To achieve this, MOV'IT has increased the diameter and thickness of the brake discs and used more cross holes. Each pre-cast hole is re-drilled and countersunk to achieve a more favourable flow. The brake disc's optimised DDE ventilation system has an 80% larger surface area compared to other brake discs, resulting in a significant reduction in temperature and wear.Without parts certificate Attention: The conversion means that only rims with at least 19 inches can be fitted! Features: - Upgrade kit front axle, 370mm, 2-piece disc, perforated - Without parts certificate Scope of delivery: - 2x brake disc perforated left/right incl. brake pot - 1x mounting material - 1x installation instructions and running-in instructions Compatible vehicles:Audi R8 (422, 423) 4.2 FSI quattro 309kW / 420PS / 4163cm³ (until 31/08/2009)Audi A4 B7 (8E) RS4 quattro 309kW / 420PS / 4163cm³Audi A6 C5 (4B) RS6 quattro 331kW / 450PS / 4172cm³Audi A6 C5 (4B) RS6 quattro plus 353kW / 480PS / 4172cm³ Notes:When installing the upgrade kit, we always recommend replacing the brake pads, as the use of used pads on new brake discs is not recommended.When installed in our factory, the conversion is carried out exclusively with new brake pads!

Eibach Pro-Kit performance suspension springs for front and rear axle E10-20-046-03-22 The Eibach Pro-Kit lowering springs are the ideal solution for your vehicle, as the kit lowers the centre of gravity, reduces rebound when accelerating, reduces body roll when cornering and dips when braking. As a result, understeer and oversteer no longer occur. Lowering the vehicle with the Pro-Kit springs reduces the standard distance between the tyres and the wheel arch and gives the vehicle a sporty look. In addition, the handling of the vehicle is maximised. The Eibach Pro-Kits are designed by Eibach suspension engineers and test experts to deliver a combination of sporty looks and performance without compromising on safety or ride quality. - Developed and tested for combination with standard and aftermarket dampers- Component of the Eibach Pro system- Top performance handling- Lowers the vehicle's centre of gravity by up to 40 mm (depending on the vehicle)- Spring design for traction and attraction- Progressive suspension characteristics- Performance handling- ABE or parts certificate Note: Only for vehicles without levelling control. Information:- Lowering front axle: approx. 20mm- Lowering rear axle: approx. 20mm- Type of approval: with expert opinion- Suspension: for all standard damping systems- Illustration may differ from the original Compatible vehicles:- Axle load front axle: up to 880kg- Axle load rear axle: up to 1000kg- EC type approval number: e1*2007/46*1949*..- Only for vehicles without levelling control BMW Z4 (G29) M40i 250kW / 340PS 0005-CTI

Facts: - 4.49“ (114mm) > 3” (76mm), replaces the main catalyst - with 200 cell HJS stainless steel sports catalyst - Euro 6 compatible - for current OPF models - with Thermo-Integral insulation (for an extra charge) - with ECE approval* Compatible vehicles: VehicleVehicle typePowerEngine capacityEngine typeYear of constructionBMW X5 (G05)xDrive 40i OPF250kW / 340hp2998cm³B58 B30 C08.18 - Note: Depending on the software version, the engine control light may light up. We recommend the purchase of an OFF set module or software customisation. *This downpipe has ECE approval so that it can be used within the scope of the German Road Traffic Licensing Regulations (StVZO) without registration in the vehicle documents.

Maximise the performance of your vehicle with our EVO 2 high performance intercooler kit! Your vehicle deserves the best, and our EVO 2 High Performance Intercooler Kit will make sure you get just that. Here's what you can expect: The Wagner Tuning intercooler an amazing 68% larger flow area compared to the factory radiator. This means more fresh air for your engine and a noticeable increase in performance. Our kit offers an astonishing 90% more charge air volume than the standard cooler. This leads to improved combustion and ultimately more power and efficiency. Despite its impressive size, our intercooler weighs just 8.6kg. The end boxes of the cooler are made of cast aluminium and have been optimised with the help of flow analyses in the CFD system. This guarantees optimum air flow and minimises back pressure. Our competition high-performance mesh is a high-quality tube-fin mesh with internal turbulators, which ensures excellent cooling properties. All our intercoolers have an anti-corrosion coating with excellent heat conduction properties to ensure long-lasting and optimal cooling. Our kit is designed for easy installation and is a plug-and-play upgrade. You can continue to use your original charge air hoses, making installation even easier. The EVO 2 kit has been specifically designed to meet the high demands of the vehicle and is ready to take your performance to the next level. We subject all our products to rigorous quality control to ensure they meet the highest standards. Don't miss the chance to boost the performance of your vehicle. Visit our website for more information and to order your kit. The Competition Intercooler Kit EVO 2 is also plug and play suitable for the following vehicles: BMW 114i F20 / F21 75KW/102hp (2012-2015) BMW 116i F20 / F21 100KW/136hp (2011-2015) BMW 116i F20 / F21 80KW/109hp (2015+) BMW 118i F20 / F21 125KW/170hp (2011-2015) BMW 118i F20 / F21 100KW/136hp (2015+) BMW 120i F20 / F21 130KW/177hp (2014-06/2016) * not suitable for B48 engine BMW 125i F20 / F21 160KW/218hp (2012-06/2016) * not suitable for B48 engine BMW M135i(x) F20 / F21 235-240KW/320-326hp (2011-2016) BMW 114d F20 / F21 70KW/95hp (2012+) BMW 116d F20 / F21 85KW/116hp (2011+) BMW 118d(x) F20 / F21 105-110KW/143-150hp (2011+) BMW 120d(x) F20 / F21 135-140KW/184-190hp (2011+) BMW 125d F20 / F21 160-165KW/218-224hp (2012+) BMW 218i F22 / F23 100KW/136hp (2015-2019) BMW 220i F22 / F23 135KW/184hp (2014-06/2016) * not suitable for B48 engine BMW 228i(x) F22 / F23 180KW/245hp (2014-06/2016) BMW M235i(x) F22/F23 240KW/326hp (2014-2016) BMW M2 F87 272KW/370hp (2016-2018) BMW 218d F22 / F23 103-110KW/143-150hp (2014-2019) BMW 220d(x) F22 / F23 135-140KW/184-190hp (20142019) BMW 225d F22 / F23 160-165KW/218-224hp (2014-2019) BMW 316i F30 / F31 / F34 100KW/136hp (2011-2015) BMW 318i F30 / F31 / F34 100KW/136hp (2015+) BMW 320i(x) F30 / F31 / F34 135KW/184hp (2011-2015) * not suitable for B48 engine BMW 328i(x) F30 / F31 / F34 180KW/245hp (2011-2015) BMW 335i(x) F30 / F31 / F34 225KW/306hp (2011-2015) BMW 316d F30 / F31 / F34 85KW/116hp (2012+) BMW 318d(x) F30 / F31 / F34 105KW/143hp (2012+) BMW 320d(x) F30 / F31 / F34 135-140KW/184-190hp (2011+) BMW 325d F30 / F31 / F34 160KW/218hp (2013+) BMW 328(x)d F30 / F31 / F34 135KW/184hp (2013+) BMW 330d(x) F30 / F31 / F34 190KW/258hp (2012+) BMW 335d(x) F30 / F31 / F34 230KW/313hp (2013+) BMW 418i F32 / F33 / F36 100KW/134hp (2016-) BMW 420i(x) F32 / F33 / F36 135KW/184hp (2013-2015) * not suitable for B48 engine BMW 428i(x) F32 / F33 / F36 180KW/245hp (2013-2016) BMW 435i(x) F32 / F33 / F36 225KW/306hp (2013-2016) BMW 418d F32 / F33 / F36 105-110KW/1143-150hp (2014+) BMW 420d(x) F32 / F33 / F36 135-140KW/184-190hp (2013+) BMW 425d F32 / F33 / F36 160-165KW/218-224hp (2014+) BMW 430d(x) F32 / F33 / F36 190KW/258hp (2013+) BMW 435d(x) F32 / F33 / F36 230KW/313hp (2013+) Dimensions original intercooler: 510mmx130mmx110mm A= 7.293cm³ Wagner Tuning intercooler dimensions: 520mm x215mmx145mm / stepped A= 13.840cm³ Scope of delivery: 1 intercooler 1 mounting material 1 assembly instruction Attention: Not approved in the area of the StVZO.

AutoTecknic Carbon Front Grille - E92 Pre-LCI Coupe - Plain Weave Compatible vehicles:BMW    3 Cabriolet (E93)    320 d    2007-2010BMW    3 Cabriolet (E93)    320 d    2008-2010BMW    3 Cabriolet (E93)    320 d    2008-2013BMW    3 Cabriolet (E93)    320 i    2006-2013BMW    3 Cabriolet (E93)    320 i    2007-2013BMW    3 Cabriolet (E93)    320 i    2007-2013BMW    3 Cabriolet (E93)    323 i    2007-2011BMW    3 Cabriolet (E93)    325 d    2007-2010BMW    3 Cabriolet (E93)    325 d    2007-2010BMW    3 Cabriolet (E93)    325 i    2006-2010BMW    3 Cabriolet (E93)    325 i    2006-2013BMW    3 Cabriolet (E93)    325 i    2007-2013BMW    3 Cabriolet (E93)    330 d    2007-2013BMW    3 Cabriolet (E93)    330 i    2007-2010BMW    3 Cabriolet (E93)    330 i    2007-2013BMW    3 Cabriolet (E93)    335 i    2006-2013BMW    3 Cabriolet (E93)    M3    2008-2013BMW    3 Coupe (E92)    316 i   2007-2013BMW    3 Coupe (E92)    320 d    2006-2010BMW    3 Coupe (E92)    320 d    2006-2010BMW    3 Coupe (E92)    320 d    2007-2013BMW    3 Coupe (E92)    320 i    2007-2013BMW    3 Coupe (E92)    320 i    2007-2013BMW    3 Coupe (E92)    320 i    2007-2013BMW    3 Coupe (E92)    323 i    2006-2012BMW    3 Coupe (E92)    325 d    2007-2010BMW    3 Coupe (E92)    325 d    2007-2010BMW    3 Coupe (E92)    325 i    2006-2010BMW    3 Coupe (E92)    325 i    2007-2013BMW    3 Coupe (E92)    325 i    2010-2013BMW    3 Coupe (E92)    325 i xDrive    2008-2013BMW    3 Coupe (E92)    325 i xDrive    2008-2013BMW    3 Coupe (E92)    325 i xDrive    2010-2013BMW    3 Coupe (E92)    325 xi    2006-2010BMW    3 Coupe (E92)    325 xi    2007-2008BMW    3 Coupe (E92)    325 xi    2007-2008BMW    3 Coupe (E92)    328 i    2006-2013BMW    3 Coupe (E92)    330 d    2006-2008BMW    3 Coupe (E92)    330 i    2006-2010BMW    3 Coupe (E92)    330 i    2007-2013BMW    3 Coupe (E92)    330 i xDrive    2010-2013BMW    3 Coupe (E92)    330 xd    2006-2008BMW    3 Coupe (E92)    330 xi    2006-2007BMW    3 Coupe (E92)    330 xi    2006-2007BMW    3 Coupe (E92)    330 xi    2007-2010BMW    3 Coupe (E92)    335 d    2006-2013BMW    3 Coupe (E92)    335 i    2006-2013BMW    3 Coupe (E92)    335 i    2006-2013BMW    3 Coupe (E92)    335 i xDrive    2008-2013BMW    3 Coupe (E92)    335 xi    2007-2010BMW    3 Coupe (E92)    M3    2007-2013BMW    3 Coupe (E92)    M3 GTS    2007-2013