Aulitzky Exhaust | ECE flap exhaust system 3” (76mm) from OPF | fits Toyota Yaris 1.6 GR (P21) 280hp | PRE-ORDER

AED 0.00*

Prices incl. VAT plus shipping costs

Available in 45 days, delivery time approx. 4 weeks. Exact delivery time on request*.

Optional: Reinforced exhaust rubber mounts

Aulitzky Exhaust | Reinforced exhaust rubbers | 3 pieces | fits Toyota Yaris 1.6 GR (P21)

Reset choice

AED 0.00*

Optional: Installation on site at Aulitzky Tuning

Please note: If you select this option, the shipping costs in your shopping cart will only be waived if the shipping method is changed to “On-site installation/assembly” during the payment process! If on-site assembly is not selected/paid for, but the shipping method is changed, no assembly will take place and the shipping costs must be paid additionally.

Assembly at location DE-91564 Neuendettelsau

Reset choice

AED 0.00*

Optional: Swiss declaration of suitability

Is a declaration of suitability required? (Only necessary in Switzerland)

Swiss declaration of suitability

Reset choice

AED 0.00*

place a request

Finanzieren Sie ihren Einkauf über die Targobank.

Product number: AEAGAYARISGR-FL

Product information "Aulitzky Exhaust | ECE flap exhaust system 3” (76mm) from OPF | fits Toyota Yaris 1.6 GR (P21) 280hp | PRE-ORDER"

This article is only a pre-order! The reduced price is only valid for the time of the pre-order, after that the regular price applies.

Facts:
- Stainless steel 3 inch (76mm) exhaust system from OPF
- tailpipe trims black 101mm
- electric flaps
- Made in Germany (Lake Constance)
- Plug & Play
- with ECE approval*

Attention: The delivery date of the exhaust system is in January 2026!

Scope of delivery:
- 1x Aulitzky Exhaust exhaust system from OPF
- Tailpipes of your choice
- ECE handout

Compatible vehicles:

Vehicle	Vehicle type	Power	Engine capacity	Engine	Year of construction
Toyota Yaris (P21)	1.6 GR 4WD	206kW / 280hp	1618cm³	G16E-GTS	03.24 -

*This flap exhaust system has ECE approval so that it can be used legally within the scope of the StVZO without registration in the vehicle documents.

Please enter a valid email address.

Your question *

Please enter a valid question.

I agree that my data will be processed to answer the question. I have taken note of the Privacy Policy and agree to the information described therein.*

To continue, enter the characters shown above*

Fields marked with * are mandatory.

There aren't any asked questions yet.

Last seen products

Brake system VA 342x28mm 4K | fits Audi S1 (8X), VW Polo WRC (6R) | parts certificate | MOVIT

MOVIT DDE steel brake system 342x28mm (4 piston calliper) for the front axle, from 18 inch rims upwardsApplication-focussed development is the cornerstone of this high-performance brake system. The required balance of weight, performance and durability is optimally combined. The uncompromising selection of materials in production results in a highly unique product that meets the diverse requirements of extreme automotive applications. The most important features of the MOVIT brake system are- The progressive staggering of the piston diameters, matched to the vehicle, so that precisely parallel contact pressure between the pad and the disc is guaranteed. This enables even wear of the brake pads and ensures even heat transfer and a reduced system temperature.- Very good heat dissipation due to the open design of the brake pad contour.- Calipers manufactured from high-strength, highly tempered aircraft aluminium 7075 with high-quality material properties (stiffer components, more homogeneous structure), hard anodised and coated with a triple layer of paint.- Optimised stability due to the length of the callipers- Larger brake disc diameter and thickness, more cross holes (each pre-cast hole is re-drilled and countersunk, which has a favourable effect on the flow).- The brake discs are thermally tempered.- The optimised DDE ventilation system (double directional evolvent system) of the brake disc has an 80% larger surface area compared to other brake discs, the temperature of the brake disc is significantly reduced and therefore also the wear.- Long service life of the wearing parts, excellent response behaviour, steel flex lines ensure consistent performance.- Optimally matched brake pads ensure fading resistance, a long service life and reduced wear on spare parts Attention: The conversion means that only rims with at least 18 inches can be fitted! The chassis number of the vehicle on which the brakes are fitted is required for the parts certificate. MOVIT sports brake callipers, 4s6, 4-piston- Milled from high-strength aircraft aluminium 7075- Two-piece- Use of maximum disc size due to long design- Significantly improved rigidity and extended contact surface of the pad- Uniform heat transfer- Reduced system temperature- Low, even pad wear- Progressive piston staggering- Crown system for fixing the brake hose- RAPAD-X system for quick brake pad replacement without removing the caliper from the bracket- Open brake pad track for optimised cooling- Maximum stability- Maximum braking force MOVIT sports brake discs, 342x28mm, 2-piece- Highly efficient DDE cooling system- Perforated for optimum response behaviour even on wet roads- Maximum fading resistance- Special alloy for high thermal conductivity MOVIT brake pads, comfort BE-4s6- Enlarged friction surface- Lower system temperature- Uniform heat transfer- Longer service life Scope of delivery:2x MOVIT brake caliper (left/right)2x MOVIT brake disc (left/right)2x vehicle-specific brake caliper adapter1x set of comfort brake pads2x steel flex lines1x assembly material1x installation instructions and running-in instructions1x parts certificate Compatible vehicles:Audi S1 8XVW Polo 6R WRC

AED 17,307.50*

Mirror covers Carbon | fits BMW M5/5er/7er/i7 (G90/G99/G60/G61/G68/G70) | Aulitzky Tuning

The exterior mirror covers in glossy pre-preg carbon fibre give your standard mirror units a more premium look. Unlike regular carbon fibre, Pre-Preg carbon is reinforced to increase strength and durability. It can also be a staggering 70% lighter than other carbon fibre options.Prepreg carbon is far more uniform than other carbon types, meaning the likelihood of imperfections is drastically reduced. The manufacturing process eliminates unwanted air bubbles and results in a perfectly smooth and high-gloss finish. Details:- 100% pure prepreg carbon fibre construction- OEM-style weave- High gloss finish- Guaranteed fit- registration free Scope of delivery:- 1x pair of mirror caps Compatible vehicles:BMW M5 (G90)BMW M5 (G99)BMW 5 Series (G60)BMW 5 Series (G61)BMW 5 Series (G68)BMW i5 (G60)BMW 7 Series (G70) Note: This is NOT an original BMW product!

AED 2,360.70*

Centre console cover rear seat Carbon | passend für BMW M2/M4 (F87/F82/F83/G87) | Aulitzky Tuning

The Centre console cover for the rear seat made of pre-preg carbon fiber perfectly emphasize the style of the vehicle.Details:- 100% pure pre-preg carbon fibre construction- OEM style carbon fibre- High gloss finish- Perfect fit- Registration free Compatible vehicles: - BMW F80 M3 - BMW F82 M4 Coupe - BMW F83 M4 Cabrio - BMW F87 M2 - BMW F87C M2 - BMW G87 M2 Note: This is NOT an original BMW product!

AED 855.70*

Turbo outlet | fits VAG 2.0TSI EA888 Gen.4 Golf 8 GTI, TT 8S, Octavia NX RS, Formentor VZ etc. 245hp | Wagner Tuning

Suitable for the following vehicles:Audi TT 8S 45 TFSI 2.0 TSI (EA888 Gen.4 DNP) 180kW / 245hpVW Golf VIII Type CD2.0 GTI (EA888 Gen.4 DNP) 180kW / 245hpVW Tiguan AD (FL) 2.0 TSI (EA888 Gen.4 DNP) 180kW / 245hpSkoda Octavia NX 2.0 TSI RS (EA888 Gen.4 DNP) 180kW / 245hpSkoda Kodiaq 2.0 TSI RS (EA888 Gen.4 DNP) 180kW / 245hpCupra Leon KL 2.0 TSI (EA888 Gen.4 DNP) 180kW / 245hpCupra Formentor VZ 2.0 TSI (EA888 Gen.4 DNP) 180kW / 245hp The Wagner Tuning Turbo Outlet has been specially developed for vehicles with the EA888 Gen.4 engine and Garrett turbocharger to optimise performance and response. With an innovative design and high-quality materials, this turbo outlet offers a plug-and-play solution for a wide range of vehicle models, including Audi, VW, Skoda and Seat. The Wagner Tuning Turbo Outlet is the ideal choice for discerning vehicle enthusiasts who want to get maximum power and performance from their vehicles.Optimised air mass flow: The Turbo Outlet has been developed using CFD flow simulations to maximise air mass flow and increase performance. Plug-and-play installation: Easy installation thanks to the plug-and-play design that allows direct replacement of the standard part. Reduction of turbulence: By increasing the internal diameter to Ø48mm, turbulence is minimised, resulting in improved airflow and optimised responsiveness. High-quality materials: CNC-machined from high-strength aluminium alloy and anodised black for durability and aesthetics.Made in Germany: Manufactured in Germany to the highest quality standards. Scope of delivery:1 x Turbo outlet (exhaust nozzle) With parts certificate (for easy registration according to §19 paragraph 3 of the StVZO).

AED 516.00*

Aulitzky Exhaust | ECE flap exhaust system 3” (76mm) from OPF | fits Toyota Yaris 1.6 GR (P21) 280hp | PRE-ORDER

Ratenrechner

Ask a question

Previously asked questions