Aulitzky Exhaust | OPF-Deleter | fits BMW X5M/X6M Competition (F95/F96) 625hp S63 | Motorsport articles

Actuator for exhaust flap OEM part number: 18307851568 (18 30 7 851 568) Suitable for the following BMW models with exhaust flap: F80 F82 F83 F85 F86 F87N F90 F91 F92 F93 F95 F96 F97 F98 G01 G02 G05 G06 G14 G15 G16 G20 G21 G22 G23 G26 G30 G42 G82 G83

Pre-preg carbon fibre air intakes are an excellent addition to significantly enhance the style of your vehicle. Unlike regular carbon fibre, Pre-Preg carbon is reinforced to increase strength and durability. It can also be a staggering 70% lighter than other carbon fibre options.Prepreg carbon is far more uniform than other carbon types, meaning the likelihood of imperfections is drastically reduced. The manufacturing process eliminates unwanted air bubbles and results in a perfectly smooth and high-gloss finish. Details:- 100% pure prepreg carbon fibre construction- OEM-style weave- High gloss finish- Fit guarantee- Registration according to §21 possible Scope of delivery:- 1x pair of air intakes Compatible vehicles:BMW X5 (F95) FaceliftBMW X6 (F96) Facelift Note: This is NOT an original BMW product!

The high-quality Pre-Preg carbon fibre air intakes are an excellent addition to significantly enhance the style of your vehicle. Unlike regular carbon fibre, Pre-Preg carbon is reinforced to increase strength and durability. It can also be a staggering 70% lighter than other carbon fibre options.Prepreg carbon is far more uniform than other types of carbon, meaning the likelihood of imperfections is drastically reduced. The manufacturing process eliminates unwanted air bubbles and results in a perfectly smooth and high-gloss finish. Details:- 100% pure prepreg carbon fibre construction- OEM-style weave- High gloss finish- Fit guarantee- Registration according to §21 possible Scope of delivery:- 1x pair of SOOQOO air intakes Compatible vehicles:BMW X5 (F95) FaceliftBMW X6 (F96) Facelift Note: This is NOT an original BMW product!

Facts: - replaces the main catalytic converter - with 4x stainless steel sports catalytic converter - Euro 6 compatible - optionally with Thermo-Integral insulation (with surcharge) - with ECE approval*Compatible vehicles:VehicleVehicle typePower outputEngine capacityEngineYear of construction from BMW 5 Series (F90)M5 441kW / 600PS4395ccS63 B44 B2019 - BMW 5 Series (F90)M5 Competition460kW / 625PS4395ccS63 B44 B2019 - BMW 5 Series (F90)M5 CS467kW / 635PS4395ccS63 B44 B2019 - BMW 8 Series (F92)M8 441kW / 600PS4395ccS63 B44 B2019 - BMW 8 Series (F92)M8 Competition460kW / 625PS4395ccS63 B44 B2019 - BMW X5 (F95)M441kW / 600PS4395ccS63 B44 B2019 - BMW X5 (F95)M Competition460kW / 625PS4395ccS63 B44 B2019 - BMW X6 (F96)M441kW / 600PS4395ccS63 B44 B2019 - BMW X6 (F96)M Competition460kW / 625PS4395cm³S63 B44 B2019 - With combination certificate in conjunction with the Aulitzky Exhaust exhaust system, intercooler, intake and our power increase to 760PS.Note: Depending on the software version, the engine control light may light up. We recommend adapting the software in this case.Suitable for OE article number: 18328088820 Catalytic converter cyl. 1-4 18328088821 Catalytic converter cyl. 5-8 18329504708 Catalytic converter bottom cyl. 1-4 18329504709 Catalytic converter cyl. 5-8 *This downpipe has ECE approval so that it can be used within the scope of the StVZO without registration in the vehicle documents.

Facts: - Tailpipes: 4x101mm black - electric flaps - Made in Germany (Lake Constance) - with/without ECE approval for S63 engines (depending on choice of flap control)* Scope of delivery: - 1x Aulitzky Exhaust rear silencer - 4x tailpipes 101mm black - ECE handout for S63 Compatible vehicles: VehicleVehicle typePowerEngine capacityEngineYear of construction BMW X5 (F95)M441kW / 600hp4395cm³S63 B44 B12.19 - 03.23 BMW X5 (F95)M Competition460kW / 625hp4395cm³S63 B44 B12.19 - BMW X5 (F95)M Competition*460kW / 625hp4395cm³S68 B44 A*04.23 - BMW X6 (F96)M441kW / 600hp4395cm³S63 B44 B12.19 - 03.23 BMW X6 (F96)M Competition460kW / 625hp4395cm³S63 B44 B12.19 - 03.23 BMW X6 (F96)M Competition*460kW / 625hp4395cm³S68 B44 A*04.23 - *Attention: The certificate for the S68 engines is currently in preparation and NOT available yet! *ATTENTION! In conjunction with the standard or ECE flap control system (with type approval), this flap rear silencer has ECE approval so that it can be used legally within the scope of the StVZO without registration in the vehicle documents.The use of flap rear silencers in conjunction with the race flap control (without approval) is not permitted for use on public roads and is only intended for racing purposes! If you nevertheless install a product without approval in your vehicle and use it within the scope of the StVZO, you are liable to prosecution. Possible consequences that you can expect in this case: Expiry of the operating licence in accordance with §19 of the StVZO and possible resulting immobilisation of the vehicle. Other possible consequences, such as a charge of tax evasion, as well as possible investigations by the environmental authorities are at the discretion of the investigators.

The Aulitzky Exhaust OPF-Deleter module is used to mechanically remove the OPF (gasoline particulate filter) without subsequent software adaptation.It is installed in the engine compartment and can be removed at any time without leaving any residue. - No error messages from the module- No detection possible using the manufacturers test device Notes:An OPF deleter is only there to suppress an error message from the catalytic converter or OPF monitoring.  This can appear if, for example, a modified downpipe or an export flap control is installed and the flaps are permanently open as a result.Caution:The OPF must still be installed.However, if the OPF is removed completely, the OPF offset cables are required in addition to the OPF deleter. (These are also available in the online store).1. after removing the OPF, the complete sensor system including all lines must still be connected to the exhaust system and be tight! Otherwise, error messages will appear despite the OPF deleter and offset cable!2. for F8x M models, the package consisting of OPF deleter and OPF offset must be purchased from the outset when installing an export flap control, otherwise error messages may still occur despite the OPF being installed! Compatible vehicles:VehicleVehicle typePowerEngine capacityEngine typeYear of constructionBMW X5 (F95)M Competition460kW / 625hp4395cm³S63 B44 B12.19 -BMW X6 (F96)M Competition460kW / 625hp4395cm³S63 B44 B12.19 - 03.23 Note: This product is NOT approved in the StVZO and is NOT intended for sale within the EU! intended for sale within the EU! This item is intended exclusively for show and motorsport purposes and must not be used/installed on public roads. If the component is installed on/in the vehicle, the operating license expires! For dealers only. No sale to end customers!

No detail is too small to customise: Enthusiasts know that every change can make a big difference. The same goes for this AutoTecknic carbon fibre side vent kit. When it comes to carbon fibre, you're guaranteed to get a unique and lightweight design, not to mention incredible robustness. Leave no stone unturned when it comes to your vehicle. Bring your vision to life with AutoTecknic. Product info:- Suitable for F95 X5M models- 2x2 glossy carbon fibre fabric- Sold as a pair (as a set)- OEM X5M side grills are not included Compatible vehicles:BMW X5 (G05, F95) M 2019-2023BMW X5 (G05, F95) M Competition since 2019

The familiar, striking three-part design in a further perfected form. The look and performance have been enhanced by the addition of winglets at the outer ends of the side splitters. This bold move adds even more visual drama to the front end of the F95, elegantly recalling the most iconic designs of the past.

Power increase: 18-25 hp, 15-18 ft-lb with up to 30 hp peak powerMaximum flow rates: Standard 774 CFM, Eventuri 900 CFM Expert opinion: none (in preparation) Introducing the Eventuri intake manifold for F9X and G09.This intake is the result of extensive research, development and testing to improve the flow of the standard system. This system is a complete redesign of the stock airboxes with the aim of reducing pressure loss while increasing flow rate and keeping intake temperatures low. Since the stock cold air intakes are located at the front of the vehicle and the turbo intakes face the rear of the vehicle, the airflow must complete a 180-degree turn through each airbox, resulting in flow restriction. To overcome this problem, Eventuri have introduced an additional cold air intake from the cover plate, which allows a more direct flow path to the turbo inlets. The additional intakes allow the intake tract to have a higher flow rate while keeping the IAT low, and has the added benefit of no longer restricting the noise of the turbos. With the intakes now facing the cabin, the sounds of turbo flutter and depressurization are clearly audible, taking the driving experience to a new level. The Eventuri DifferenceThe Eventuri system for F9X, G09 uses their patenteda carbon fiber housing with their custom Gen 2 filters that provide an aerodynamically efficient airflow path from the filter to the turbos. It is not another cone filter with a heat shield, but a unique design that utilizes the Venturi effect and maintains laminar flow conditions to reduce the drag of the turbo. Bench testingThis intake has been independently bench tested by MSL Performance in the UK. The tests were carried out back to back with the standard airbox and multiple runs were made with each configuration. The tested vehicle was driven without the activated carbon filter in the standard airboxes. The results on the test bench show a consistent increase in power over a large part of the rev range, which is due to the turbos reaching maximum boost pressure earlier and operating with a lower wastegate duty cycle due to the higher efficiency of the intake system. The increase in power is reflected on the road in improved response at part and full throttle, with the car pulling much more eagerly to redline. Each intake system consists of:2 x patented carbon fiber venturi filter housings2 x Bespoke high flow dry cone filters2 x carbon fiber dual air ducts Carbon fiber engine cover2 x EPDM rear air intakes Silicon couplings CNC machined console brackets Compatible vehicles:VehicleVehicle typePowerEngine capacityEngine typeYear of construction BMW X5 (F95)M60i xDrive Mild-Hybrid390kW / 530hp4395cm³S68 B44 A04.23- BMW X5 (F95)M Competition Mild-Hybrid460kW / 625hp4395cm³S68 B44 A04.23 - BMW X6 (F96)M60i xDrive Mild-Hybrid390kW / 530hp4395cm³S68 B44 A04.23- BMW X6 (F96)M Competition460kW / 625hp4395cm³S68 B44 A04.23 - BMW XM (G09)Plug-in-Hybrid Allrad480kW / 653hp4395cm³S68 B44 A12.22- BMW XM (G09)Label Allrad550kW / 748hp4395cm³S68 B44 A08.23 -

KW coilover springs The spring set with stepless lowering KW coilover springs are used to lower the vehicle in combination with the standard dampers. In contrast to conventional spring sets, individual height adjustment is possible within the tested adjustment range. This solution uses vehicle-specific spring mounts with matched KW lowering springs and suitable elastomers as well as dust protection systems. The standard damper system, for example with electronic or hydraulic control, remains active. Setup - sporty and harmonious spring rates The high-quality chrome-silicon steel springs used by KW coilover springs are matched to the respective standard suspension dampers and wheel loads in their spring rate for each specific vehicle. When developing the respective spring sets, we ensure that the spring rates also harmonise perfectly with the different damper characteristics of your adaptive standard suspension. So even with a KW coilover spring set, you will experience your car more directly and dynamically. KW coilover springs are suitable for car drivers who want to lower their vehicle discreetly and take advantage of an individual adjustment range. Stepless lowering Similar to a coilover suspension, the KW coilover springs allow a stepless lowering in a discreet range. This is not possible with conventional lowering springs. The dust protection elements and spring travel limiters included in the scope of delivery are always adapted to the maximum possible lowering. This means that the height-adjustable KW springs can be used to achieve a sporty, harmonious driving behaviour without compromising the driving dynamics of performance-oriented vehicles. Please note the conditions and instructions for this product: - Not for vehicles with level control / air suspension - VA + HA height-adjustable (spring set consisting of VA+HA springs with height adjustment, can only be used with standard dampers) Technical information: Lowering VA/HA (mm): 25-45/20-40 Adjustment VA/HA: thread/thread Approval: Parts certificate (§19.3) Scope of delivery: Set (VA+HA) Compatible vehicles: Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive BMW X5 (G05, F95) G5X 08/2018- M SUV Petrol 441 KW 4395 ccm 8 All-wheel drive BMW X5 (G05, F95) G5X 08/2018- M Competition SUV Petrol 460 KW 4395 ccm 8 All-wheel drive BMW X5 (G05, F95) G5X 08/2018- M Competition Mild Hybrid SUV Petrol/Electric 460 KW 4395 ccm 8 All-wheel drive BMW X6 (G06, F96) G6X 08/2019- M SUV Petrol 441 KW 4395 ccm 8 All-wheel drive BMW X6 (G06, F96) G6X 08/2019- M Competition SUV Petrol 460 KW 4395 ccm 8 All-wheel drive BMW X6 (G06, F96) G6X 08/2019- M Competition SUV gasoline/electric 460 KW 4395 ccm 8 all-wheel drive

Facts:- Plug & Play installation using illustrated installation instructions- Special wiring harness for your vehicle- High-quality electronics “Made In Germany”- Electronic components with product qualification for motor vehicles according to AEC-Q100 installed- Support from us as co-developer and manufacturer Scope of delivery:The scope of delivery includes the motorsport add-on module, an engine-specific wiring harness, illustrated installation instructions in DE/EN and a BYPASS connector, which you can use to restore your vehicle to series production. Compatible vehicles: VehicleVehicle typePowerEngine capacityEngine typeYear of constructionBMW X5 (F95)M Competition460kW / 625hp4395cm³S63 B44 B06.21 - BMW X6 (F96)M Competition460kW / 625hp4395cm³S63 B44 B06.21 - LEGAL INFORMATION: THE INSTALLATION OF ADDITIONAL ELECTRONICS IS A STRUCTURAL MODIFICATION TO THE MANUFACTURER'S ELECTRONICS. WITHOUT REGISTRATION IN THE VEHICLE DOCUMENTS BY MEANS OF AN INDIVIDUAL CERTIFICATE FROM TÜV; DEKRA OR OTHER RECOGNIZED TESTING INSTITUTES, THE INSTALLATION WILL INVALIDATE THE OPERATING LICENSE. IF USED ON PUBLIC ROADS, THIS WILL RESULT IN THE LOSS OF INSURANCE COVER. WE DO NOT CURRENTLY HAVE A PARTS CERTIFICATE FOR YOUR VEHICLE. THEREFORE, THIS SYSTEM IS EXCLUSIVELY SUITABLE FOR MOTORSPORT. ATTENTION: IF YOU USE THE ADDITIONAL ELECTRONICS, YOU MAY LOSE YOUR WARRANTY CLAIMS AGAINST THE SELLER OR WARRANTY CLAIMS AGAINST THE MANUFACTURER. IF YOU HAVE ANY FURTHER QUESTIONS, PLEASE DO NOT HESITATE TO CONTACT US!

The AULITZKY app "do it yourself" Get your app now to tune your car yourself or to manage a selection of your finished maps, which have been individually tuned on our test bench, and flash them to your vehicle in no time at all. In addition to flashing your engine control unit, we also offer transmission programming. It is also possible to fully read and delete the fault memory. Your benefits at a glance: -software for ECU (engine control unit) -Software for TCU (transmission control unit) -Read fault memory -Delete fault memory -Datalogging -Tuning for Stage 1 & Stage 2 included -Custom maps possible -Stage 3 available on site for an additional charge Please note: From certain model years and variants, an OBD unlock or ECU unlock is required to ensure that your vehicle can be flashed via OBD. The OBD unlock can be carried out by sending the ECU to us or by our service centre partners at various locations in Germany. For the ECU unlock we need the vehicle in our workshop for approx. 1.5 - 2 weeks. For this model, we recommend converting our divert-air valve kit to allow the excess pressure in the turbocharger system to escape, as it can cause damage to the turbocharger without it. -Stage 1: SUV kit, Pipercross air filter -Stage 2: additional downpipes -Stage 3: additional upgrade turbocharger, reinforced pistons and connecting rods with bearings Note: Registration of the performance upgrade is not part of this order and must be requested separately by e-mail.Compatible vehicles:VehicleTypePower outputEngine capacityEngine typeYear of construction BMW 5 Series (G30)M550i xDrive340kW / 462hp4395cm³N63 B44 C03.17 - 06.19 BMW 5 Series (G30)M550i xDrive390kW / 530hp4395cm³N63 B44 D07.19 - BMW 5 Series (F90/G30)M5 441kW / 600hp4395cm³S63 B44 B09.17 - BMW 5 Series (F90/G30)M5 Competition460kW / 625hp4395cm³S63 B44 B07.18 - BMW 5 Series (F90/G30)M5 CS467kW / 635hp4395cm³S63 B44 B03.21 - BMW 7 Series (G11/G12)750i / xDrive330kW / 449hp4395cm³N63 B44 C09.15 - 02.19 BMW 7 Series (G11/G12)750i xDrive390kW / 530hp4395cm³N63 B44 D03.19 - BMW 8 Series (G14/G15/G16)M850i xDrive390kW / 530hp4395cm³N63 B44 D11.18 - BMW 8 Series (F92/G14/G15/G16)M8 441kW / 600hp4395cm³S63 B44 B07.19 - BMW 8 Series (F92/G14/G15/G16)M8 Competition460kW / 625hp4395cm³S63 B44 B07.19 - BMW X5 (G05)M50i xDrive390kW / 530hp4395cm³N63 B44 D08.19 - BMW X5 (F95/G05)M441kW / 600hp4395cm³S63 B44 B12.19 - BMW X5 (F95/G05)M Competition460kW / 625hp4395cm³S63 B44 B12.19 - BMW X6 (G06)M50i xDrive390kW / 530hp4395cm³N63 B44 D08.19 - 03.23 BMW X6 (F96/G06)M441kW / 600hp4395cm³S63 B44 B12.19 - 03.23 BMW X6 (F96/G06)M Competition460kW / 625hp4395cm³S63 B44 B12.19 - 03.23 BMW X7 (G07)M50i xDrive390kW / 530hp4395cm³N63 B44 D07.19