Charge and Boost Pipe Kit Ø70mm | fits VAG 1.8/2.0 TSI EA888 Gen.3 Golf 7 GTI/R, S3 8V, SQ2, TTS 8S, Leon Cupra 5F, Octavia RS 5E etc. | Wagner Tuning

The Wagner Tuning Competition intercooler kit for the VAG 1.8TSI - 2.0TSI engine is suitable for the following vehicles:VW Golf 7+7.5 GTI 2,0 TSI 162-228KW/220-310hp (incl. Facelift- Performance and Clubsport[S], as well as TCR models)VW Golf 7+7.5 R 2.0 TSI 221-228KW/300-310hp (incl. facelift models)VW Arteon 2.0 TSI 140-206KW/190-280hp (7-speed DSG only)VW T-Roc 2.0TSI 4Motion 140KW/190hp (not included in the parts certificate)VW T-Roc R 4Motion 221KW/300hp (not included in the parts certificate)Skoda Superb 3V 2,0TSI 162KW/220hpSkoda Superb 3V 2,0TSI 206KW/280hp With further modifications (see notes under data sheets) on the vehicle, also suitable for:Audi Q2 40TFSI 140KW/190hp* (not included in the parts certificate)Audi SQ2 221KW/300hp (not included in the parts certificate)Audi A3 8V 1,8TSI 132KW/180hp*Audi A3 8V 2,0TSI 140KW/190hp*Audi S3 8V 2.0TSI 221-228KW/300-310hp*Audi TT 8S 2.0TFSI 169KW / 230hp*Audi TTS 8S 2.0TSI 228KW/310hp*Seat Leon 5F Cupra 2,0TSI 195-272KW/265-370hp* (incl. Cupra ST 265-370 & Cupra R)Skoda Octavia 5E 1,8TSI 132KW/180hp*Skoda Octavia 5E RS 2.0TSI 162-180KW/220-245hp**The additional modifications increase the installation time to approx. 5-6 hours. Experience top performance with the Competition intercooler kit for your VW Golf 7 GTI! Get your VW Golf 7 GTI ready for the ultimate performance upgrade with our Competition intercooler kit. We have developed this kit to take your vehicle performance to a whole new level. Our intercooler has impressive mesh dimensions of 640 mm x 410 mm x 65 mm, offering an increased external charge air volume of 17 liters compared to the factory 9 liters. This means more air, more power and impressive acceleration for your Golf 7 GTI. Our specially developed competition high-performance mesh (Tube Fine) ensures optimum airflow to neighboring components such as the water cooler. Despite its size, our intercooler is surprisingly light at just 8.9 kg. The cast aluminium end boxes were created in the CAD system and optimized using CFD simulations to ensure optimal internal airflow. An integrated air duct in the end box ensures an even filling of the competition high-performance mesh. The intercooler inlets and outlets have been enlarged to an impressive Ø 70 mm and our kit includes reinforced silicone hoses to cope with the increased airflow. Compared to the factory intercooler, our intercooler offers significantly less back pressure, resulting in improved performance. All our intercoolers are equipped with an anti-corrosion coating with excellent heat conduction properties. This guarantees long-lasting and optimum cooling performance for a constant increase in performance. Replacing the factory intercooler with our kit is uncomplicated and can be carried out without any problems. Enjoy the benefits without costly modifications. Our products are subject to strict quality control procedures to ensure the highest standards. Prepare to conquer the road with your Golf 7 GTI. Boost your vehicle's performance and acceleration with our Competition intercooler kit and enjoy a top-class driving experience. Give your Golf 7 GTI the performance it deserves. Get ready to dominate the road! Advantages of the Wagner Tuning intercooler:- improved cooling performance- Charge air volume of 17 liters (instead of 8.9 liters OEM)- Inlets and outlets extended to Ø 70 mm- less back pressure- uncomplicated replacement (plug-and-play) Scope of delivery:1 intercooler2 silicone hoses2 hose clamps1 mounting material1 installation instruction1 parts certificate (OPF models excluded) With parts certificate (OPF models excluded) for easy registration according to §19 paragraph 3 of the StVZO.

FITS ONLY THE EVENTURI INLET SYSTEM: Mercedes A35 AMG, CLA35 AMG, A250, CLA250 | 177, 118 The Mercedes A35 Eventuri turbo pipe was developed to offer the turbo a less restrictive flow path compared to the standard pipe. We have succeeded in increasing the internal volume and eliminating the corrugated, flexible section on the airbox side. By using a completely solid pipe all the way from the intake tract to the turbo, the flow path is smoother and the airflow can remain more laminar. To accommodate the movement of the engine, our A35 intake has a "floating" pipe that can move within the airbox. The shape of the carbon tube on the turbo side has been optimised using CFD to minimise turbulence. The connection to the turbo is achieved by an innovative silicone coupling, which has an internal thermal separator between the carbon pipe and the metal turbo housing. The multiple vent ports at the rear of the pipe are done with a CNC machined block that also provides a smooth internal surface for airflow within the pipe. The Eventuri A35-A250 turbo inlet pipe is made from prepreg carbon fibre and comes with a range of other components designed for a specific purpose and manufactured to the highest standards. It is available to fit the A35, CLA35 and A250. The inlet pipe is only suitable for our intake system. Each intake system consists of: Prepreg carbon pipe CNC-milled breather block CNC-milled MAP boss CNC-milled breather nozzle CNC-milled reinforcement ring Laser-cut bracket Silicone couplings with oil-resistant lining Marine grade stainless steel hose clamps Compatible vehicles:VehicleTypePowerEngine capacityEngine typeYear of construction Mercedes A-Class (W177/V177)A250 / 4-matic165kW / 224hp1991cm³M 260.92003.18 - Mercedes A-Class (W177/V177)A35 AMG 4-matic225kW / 306hp1991cm³M 260.92009.18 - Mercedes CLA (C118/X118)A250 / 4-matic165kW / 224hp1991cm³M 260.92003.19 - Mercedes CLA (C118/X118)CLA35 AMG 4-matic225kW / 306hp1991cm³M 260.92004.19 -