Connecting rod bearing change | for BMW M5 (E60/E61) 507hp S85

The certificate includes the increase in rated power to 227-326kW/309-443PS (depending on the vehicle and hardware installed).Note: The purchase of the performance upgrade does not include registration in the vehicle documents. This must be purchased separately.To get the maximum performance from your vehicle, we recommend filling up with premium fuel (100/102 octane) before and after the optimisation. The following hardware components may also be installed individually or in combination for all listed vehicles as part of our combination certificate: - HJS downpipe- Wagner Tuning intercooler- Wagner Tuning intake system- Wagner Tuning pressure pipes- Aulitzky exhaust systemIn combination with all the hardware, a legal stationary noise increase to 102dB is possible. Compatible vehicles:VehicleTypePower outputEngine capacityEngineNew rated powerNote Audi A3 (8YA/8YS)S3 quattro228kW / 310PS1984cm³DNFB1) 281kW (382PS)2) 326kW (443PS)optionally in conjunction with the standard or Aulitzky exhaust system Audi Q3 (F3B/F3N)45 TFSI quattro180kW / 245PS1984cm³DNPA1) 227kW (309PS)2) 253kW (344PS)only in conjunction with the standard exhaust system Audi TT (FV3/FV9)45 TFSI / quattro180kW / 245PS1984cm³DNPA1) 227kW (309PS)2) 253kW (344PS)optionally in conjunction with the standard or Aulitzky exhaust system Audi TT (FV3/FV9)TTS quattro235kW / 320PS1984cm³DNFG1) 281kW (382PS)2) 326kW (443PS)optionally in conjunction with the standard or Aulitzky exhaust system Cupra Ateca (KH)2.0 TSI 4Drive221kW / 300PS1984cm³DNFC1) 281kW (382PS)2) 326kW (443PS)only in conjunction with the standard exhaust system Cupra Leon (KL1/KL8)2.0 TSI180kW / 245PS1984cm³DNPA1) 227kW (309PS)2) 253kW (344PS)optionally in conjunction with the standard or Aulitzky exhaust system Cupra Leon (KL1/KL8)2.0 TSI / 4Drive221kW / 300PS228kW / 310PS1984cm³DNFB, DNFC1) 281kW (382PS)2) 326kW (443PS)optionally in conjunction with the standard or Aulitzky exhaust system Skoda Octavia IV (NX5)RS 2.0 TSI180kW / 245PS1984cm³DNPA1) 227kW (309PS)2) 253kW (344PS)only in conjunction with the standard exhaust system VW Golf VIII (CD1)GTI 2.0 TSI180kW / 245PS1984cm³DNPA1) 227kW (309PS)2) 253kW (344PS)optionally in conjunction with the standard or Aulitzky exhaust system VW Golf VIII (CD1)GTI CS/ED45 2.0 TSI221kW / 300PS1984cm³DNFC1) 281kW (382PS)2) 326kW (443PS)optionally in conjunction with the standard or Aulitzky exhaust system VW Golf VIII (CD1/CDV)R 2.0 TSI 4motion235kW / 320PS245kW / 333PS1984cm³DNFF, DNFG1) 281kW (382PS)2) 326kW (443PS)optionally in conjunction with the standard or Aulitzky exhaust system VW Tiguan (AD1)2.0 TSI180kW / 245PS1984cm³DNPA1) 227kW (309PS)2) 253kW (344PS)only in conjunction with the standard exhaust system VW Tiguan (AD1)R 2.0 TSI 4motion235kW / 320PS1984cm³DNFG1) 281kW (382PS)2) 326kW (443PS)only in conjunction with the standard exhaust system VW T-Roc (A1)R 2.0 TSI 4motion221kW / 300PS1984cm³DNFC1) 281kW (382PS)2) 326kW (443PS)only in conjunction with the standard exhaust system 1) with Wagner Turbo Outlet2) with Wagner Turbo Outlet + HJS downpipe

The G90 rear spoiler made of Pre-Preg carbon fibre gives your vehicle a distinctly sporty aggressiveness and gives it a lot of presence on the road.Details:- Constructed from 100% pure pre-preg carbon fibre- OEM style weave- High-gloss finish- Perfect fit- registration according to §21 possible Scope of delivery:1x ducktail in prepreg carbon Compatible vehicles:BMW M5 G90BMW i5 G60BMW 5 Series G60Note: This is NOT an original BMW product!

Here you get an original TitanTec sports air filter with all its advantages:- higher air flow rate- higher filter performance (even smaller particles are filtered)- The particles are trapped in the filter after intake and thus remain trapped until cleaning.- Washable and reusable filter- Increased air flow and therefore better combustion in the engine- No reduction in air flow over a minimum of 50,000 km- Sufficient air even at high engine speeds- more power- Better intake noise- Reduced fuel consumption Only TitanTec sports air filters use polyurethane as the edge material. Polyurethane is more resistant to petrol, vapours and the like. It has an ideal remoulding. This ensures that the edge of the filter is 100% sealed even when it is reinserted after cleaning. The edge surface is made from a single mould. With many other makes, pores in the edge material and joining surfaces where the edge is joined together often lead to a crack in the edge, which can result in unclean air being sucked into the engine. With paper filters, the air flow rate is significantly lower and decreases further after just a short period of use.In addition, paper filters must be disposed of after the specified mileage. TitanTec sports air filters last a lifetime. This is good for the environment and your wallet.Compared to TitanTec sports air filters, other washable cotton filters only filter much larger particles. Cleaning the filters:A TitanTec sports air filter has no oil residue and has 100% of its original performance again after cleaning.Cleaning is quick and easy.We recommend cleaning after 15,000-20,000 kilometres or once a year at the latest.The best time to clean the air filter is around the end of May or beginning of June, i.e. after the pollen count, as this is the time when the air filter is under the most strain.Under no circumstances should aggressive cleaning agents such as petroleum ether, cleaning petrol, brake cleaner etc. be used, as this can damage the material. Details: 1x set of panel filters (right/left) Length: 264 mm Width: 215 mm Compatible vehicles:BMW M5 (F90) 600 hp, 441 kW, 09/17 to 06/23 BMW M5 (F90) M5 Competition, 625 hp, 460 kW, 07/18 to 06/23 BMW M5 (F90) M5 CS, 635 hp, 467 kW, 03/21 to 02/22 BMW M5 (G90) M5 plug-in hybrid all-wheel drive, 727 hp, 535 kW, from 07/24 BMW M5 Touring (G99) M 5 plug-in hybrid all-wheel drive, 727 hp, 535 kW, from 10/24 BMW M8 Coupe (F92) M8, 600 hp, 441 kW, from 07/19 BMW M8 Coupe (F92) M8 Competition, 625 hp, 460 kW, from 07/19 BMW M8 Gran Coupe (F93) M8, 600 hp, 441 kW, from 11/19 BMW M8 Gran Coupe (F93) M8 Competition, 625 hp, 460 kW, from 11/19 BMW M8 Convertible (F91) M8, 600 hp, 441 kW, from 07/19 BMW M8 Convertible (F91) M8 Competition, 625 hp, 460 kW, from 07/19Note: This is NOT an original BMW product!

Upgrade your Mercedes AMG CLS 63(S) M157 with the BlackBoost Generation 2 high-performance cold air intake system - designed for enthusiasts who crave more power, efficiency and eye-catching aesthetics. State-of-the-art design and durabilityThe airboxes are laser-cut with the utmost precision from high-strength aluminum, assembled with stainless steel fasteners and finished with a sleek black powder coating for durability and a premium look. This robust construction ensures that your intake system performs optimally even under the most demanding conditions. Customized engine coverThe intake system includes a specially designed engine cover that combines style and functionality. Not only does it protect vital components, it also gives your engine bay a classy, elegant look. Two synthetic, dry, high-flow oval air filtersEquipped with newly developed dual oval filters, this system provides a larger surface area for better airflow and filtration. These high-flow filters ensure your engine receives cleaner air, improving overall performance. Molded composite intake manifolds with 1/8 NPT pre-turbo methanol portThis intake system with advanced molded composite manifolds is designed for maximum efficiency. Integrated 1/8 NPT ports allow for easy pre-turbo methanol injection upgrades, lowering intake temperatures and optimizing airflow, especially in high performance scenarios. Oversized intake ports and couplings for maximum performanceThis system includes oversized intake ports that further improve airflow into the intake, better oxygenating the engine and increasing power potential. In addition, oversized, heat-resistant couplings facilitate installation and ensure maximum durability under extreme conditions. Easy plug-and-play installationThis cold air intake system is a direct bolt-on upgrade that requires no fine-tuning or additional modifications. It integrates seamlessly with other performance components such as turbochargers, downpipes and methanol injection systems, making it the perfect choice for CLS 63(S) M157 owners looking for increased performance. Scope of delivery:- Powder-coated airbox with engine cover- Oversized intake ducts- Molded composite intake manifold with 1/8 Npt fittings- Oversized couplings- Vent line connections- Connecting clamps- Oval Twin Flow dry filters- Filter clamps- Extension cable- AMG badge transfer kit Key features:- Completely new design with motor cover- Oval shaped filters for a larger filter surface area- Open/close filter covers for customizable airflow control- 1/8 NPT connections integrated into the composite intake tubes- Proven power increase of 8-30+ hp on stock vehicles- Improved throttle response across the entire rev range- Supports airflow for 1000+ hp configurations- Plug and play installation- No ECU tuning required- No illumination of the check engine light Compatible vehicles:E63 AMG (W212/S212) - M157 5.5L V8 BiTurbo - (2013 - 2016)CLS63 AMG (C218/X218) - M157 5.5L V8 BiTurbo - (2012 - 2018)E500 (W212/S212) - M278 4. 7L V8 BiTurbo - (2013 - 2016)CLS 500 (C218/X218) - M278 4.7L V8 BiTurbo - (2012 - 2018)E550 (W212/S212) - M278 4.7L V8 BiTurbo - (2013 - 2016)CLS 550 (C218/X218) - M278 4.7L V8 BiTurbo - (2012 - 2018)

Facts: Performance increase (standard Golf R): 10-13hp, 12-15Nm Performance increase (tuned Golf R): 15-20hp, 25-30Nm Material: Carbon fibre Manufacturer: Eventuri Parts certificate: A certificate is available for this product for certain regions and vehicles (details below) The MK8 Golf GTi/R intake manifold is a complete revision of the standard intake manifold up to the turbo inlet. Taking inspiration from our RS3 intake, we have maximised the space available to create an intake that is suitable for all power levels, from standard specification through to high performance systems with hybrid or full frame turbos. This intake system has been developed to provide the highest possible flow rate whilst achieving the lowest possible intake temperatures. Each component has been designed to give the turbo a smooth and clear flow path. The restrictive standard intake pipe with a diameter of 73 mm is replaced by an intake pipe with a larger diameter of 94 mm. The filter itself has an outer diameter of 192mm or 7.5? with a filter area of over 110,000mm^2. The patented Venturi housing is designed to provide the largest possible internal volume for the available space in the Golf engine bay and provides laminar flow to the turbo pipe. Finally, the duct seals the filter opening at the windscreen, but is not restricted by the standard intake alone. We have raised the front of the duct to now create an additional opening behind the bonnet, equivalent to an extra 7? diameter hole for the inlet to draw from. The resulting system can significantly outflow the stock airbox while keeping intake temperatures to a minimum with the sealed design. Dyno testing Our MK8 Golf intake has been independently tested by a renowned tuner in the UK, Regal Autosport. A MK8 Golf R was tested in original condition and with a tuning box. The tests were carried out on the same day, with the standard airbox being tested first and then the Eventuri. No other changes were made to the car. The first graph shows the results with a stock map. As can be seen, there is a measurable gain across the rev range of up to 12bhp. This gain is noticeable even in a standard vehicle on the road due to better throttle response and faster acceleration. The second diagram shows the results when using a tuning box that increases the flow requirement of the intake system. The tuning box was used for both the standard airbox and the Eventuri intake, with no changes made between tests. With a higher flow requirement, the stock airbox places a greater restriction on the turbo, which is evident by the significant gain achieved with the Eventuri fitted. We now have a power increase of up to 20 hp and 30 Nm across the entire rev range, which is even more noticeable on the road. We expect the gains to be even greater with higher tuning levels. The improvements are due to a combination of reasons: 1) The closed system keeps IAT levels low - the Golf's engine bay can heat up very quickly, so an open cone filter leads to an increase in IAT levels and therefore a loss of power. 2) The Venturi housing provides a smooth transition from the filter to the intake pipes, both of which are matched to an internal diameter of 94mm. This contributes to a more efficient operation of the turbo. 3) The entire system is made from pure pre-impregnated carbon fibre, which provides excellent insulation against heat and has smooth internal surfaces, unlike glass fibre, which has sharp resin lines. Parts certificate The manufacturer's specifications apply for installation. An existing certificate is no guarantee that the product can also be installed in the corresponding vehicle. A certificate is available for this product for the following regions and vehicles: * DE/AT: Vehicle registration document, field K --- CH/LI: Vehicle licence, field 24 Country Model Type approval* DE/AT Audi S3 (8Y) e1*2007/46*2060*.. DE/AT Audi TTS (FV/FVP/8S e1*2001/116*0369*.. DE/AT Cupra Ateca LCI e9*2007/46*6394*.. DE/AT Cupra Formentor e9*2007/46*4008*.. DE/AT Cupra Leon e9*2007/46*3167*.. DE/AT Skoda Octavia RS e8*2007/46*0355*.. DE/AT Skoda Superb e8*2007/46*0317*.. DE/AT Volkswagen Arteon R e1*2007/46*1725*.. DE/AT Volkswagen Golf 8 GTI e1*2007/46*2014*.. DE/AT Volkswagen Golf 8 GTI CS e1*2007/46*2014*.. DE/AT Volkswagen Golf 8R e1*2007/46*2014*.. DE/AT Volkswagen Tiguan R e1*2001/116*0450*.. DE/AT Volkswagen Tiguan R (AD1) e1*2007/46*0487*.. Compatible vehicles: VehicleVehicle typePowerEngine capacityEngine type Audi A3 (8Y)S3 2.0 TFSI quattro228kW / 310hp1984cm³DNFB Audi Q2 (GA)SQ2 2.0 TFSI quattro221kW / 300hp1984cm³DNFC Cupra Ateca (KH)2.0 TSI 4Drive221kW / 300hp1984cm³DNFC Cupra Leon (KL)2.0 TSI221kW / 300hp228kW / 310hp1984cm³DNFCDNFB Cupra Formentor (KM)2.0 TSI 4Drive228kW / 310hp1984cm³DNFB VW Arteon2.0 TSI 4motionR 2.0 TSI 4motion206kW / 280hp235kW / 320hp1984cm³DNFEDNFG VW Golf 8GTI Clubsport/ED45 2.0 TSI221kW / 300hp1984cm³DNFC VW Golf 8R 2.0 TSI 4motionR 2.0 TSI 4motion 20Years235kW / 320hp245kW / 333hp1984cm³DNFGDNNF VW Passat B8 (3G)2.0 TSI 4motion206kW / 280hp1984cm³DNFE VW T-Roc (A1)2.0 TSI 4motion221kW / 300hp1984cm³DNFC VW Tiguan II (AD)R 2.0 TSI 4motion235kW / 320hp1984cm³DNFG

H&R lowering springs for F90 models from 2018 (VA20-30/HA20-30mm) H&R sports spring kits are the ideal solution if you want to optimize the handling of your vehicle and achieve a sporty look while maintaining the standard driving comfort. Details:Lowering VA/HA Sedan: 30/30mmLowering VA/HA Competition Sedan: 20/20mmSuspension: for vehicles with electric damper controlType of approval: with general operating permit (ABE) Product advantages:Sporty look and performanceLowering of the vehicle's center of gravityLinear or progressive suspension characteristicsCan be combined with standard or retrofit dampersOptimized driving dynamicsSurface protection through powder coatingMade in Germany Compatible vehicles:BMW M5 Sedan F90 type F5LM only with adaptive damper control 2018- front axle 30mm / rear axle 30mmBMW M5 Competition Sedan F90 type F5LM, only with adaptive damper control 2018- front axle 20mm / rear axle 20mm