Engine cover Carbon | fits Audi RS4/RS5 (B8/8K/8T) 450hp | Eventuri

Facts: Material: Carbon Manufacturer: Eventuri Parts certificate: For this product a certificate is available for certain regions and vehicles (details below) The Eventuri carbon intake system for Audi B8 RS4 RS5 is designed to increase engine performance, improve handling and enhance the overall driving experience. The main aspects are the balance between aerodynamic efficiency and air intake temperature. An open system was chosen but with differences to other aftermarket airboxes. This can be recognised by the shape of the carbon housing and the position and shape of the air filter, and the airbox is manufactured using the prepreg carbon process. The official parts certificate is currently being prepared and will be available shortly. We will send the documents to all buyers who order in advance. Parts certificate The manufacturer's specifications apply to installation. An existing certificate is no guarantee that the product can also be installed in the corresponding vehicle. A certificate is available for this product for the following regions and vehicles: * DE/AT: Vehicle registration document, field K --- CH/LI: Vehicle licence, field 24 Country Model Type approval* DE/AT Audi RS 4 (B8) e1*xx/xx*0447*.. DE/AT Audi RS 5 (B8) e1*xx/xx*0447*..Compatible vehicles:VehicleTypePowerEngine capacityEngine type Audi A4 (B8/8K)RS4 quattro331kW / 450hp4136cm³CFSA Audi A5 (B8/8T)RS5 quattro331kW / 450hp4136cm³CFSA

Facts: Material: Carbon Manufacturer: Eventuri Expertise: Material Expertise Compatible vehicles:VehicleVehicle typePower outputDisplacementEngine type Audi A4 (B8/8K)RS4 quattro331kW / 450PS4136ccCFSA

Facts: Material: CarbonManufacturer: EventuriExpert option: Material certificate Compatible vehicles:VehicleVehicle typePowerEngine capacityEngine type Audi A5 (B8/8T)RS5 quattro331kW / 450hp4136cm³CFSA

The certificate includes the increase in rated power to 227-326kW/309-443PS (depending on the vehicle and hardware installed).Note: The purchase of the performance upgrade does not include registration in the vehicle documents. This must be purchased separately.To get the maximum performance from your vehicle, we recommend filling up with premium fuel (100/102 octane) before and after the optimisation. The following hardware components may also be installed individually or in combination for all listed vehicles as part of our combination certificate: - HJS downpipe- Wagner Tuning intercooler- Wagner Tuning intake system- Wagner Tuning pressure pipes- Aulitzky exhaust systemIn combination with all the hardware, a legal stationary noise increase to 102dB is possible. Compatible vehicles:VehicleTypePower outputEngine capacityEngineNew rated powerNote Audi A3 (8YA/8YS)S3 quattro228kW / 310PS1984cm³DNFB1) 281kW (382PS)2) 326kW (443PS)optionally in conjunction with the standard or Aulitzky exhaust system Audi Q3 (F3B/F3N)45 TFSI quattro180kW / 245PS1984cm³DNPA1) 227kW (309PS)2) 253kW (344PS)only in conjunction with the standard exhaust system Audi TT (FV3/FV9)45 TFSI / quattro180kW / 245PS1984cm³DNPA1) 227kW (309PS)2) 253kW (344PS)optionally in conjunction with the standard or Aulitzky exhaust system Audi TT (FV3/FV9)TTS quattro235kW / 320PS1984cm³DNFG1) 281kW (382PS)2) 326kW (443PS)optionally in conjunction with the standard or Aulitzky exhaust system Cupra Ateca (KH)2.0 TSI 4Drive221kW / 300PS1984cm³DNFC1) 281kW (382PS)2) 326kW (443PS)only in conjunction with the standard exhaust system Cupra Leon (KL1/KL8)2.0 TSI180kW / 245PS1984cm³DNPA1) 227kW (309PS)2) 253kW (344PS)optionally in conjunction with the standard or Aulitzky exhaust system Cupra Leon (KL1/KL8)2.0 TSI / 4Drive221kW / 300PS228kW / 310PS1984cm³DNFB, DNFC1) 281kW (382PS)2) 326kW (443PS)optionally in conjunction with the standard or Aulitzky exhaust system Skoda Octavia IV (NX5)RS 2.0 TSI180kW / 245PS1984cm³DNPA1) 227kW (309PS)2) 253kW (344PS)only in conjunction with the standard exhaust system VW Golf VIII (CD1)GTI 2.0 TSI180kW / 245PS1984cm³DNPA1) 227kW (309PS)2) 253kW (344PS)optionally in conjunction with the standard or Aulitzky exhaust system VW Golf VIII (CD1)GTI CS/ED45 2.0 TSI221kW / 300PS1984cm³DNFC1) 281kW (382PS)2) 326kW (443PS)optionally in conjunction with the standard or Aulitzky exhaust system VW Golf VIII (CD1/CDV)R 2.0 TSI 4motion235kW / 320PS245kW / 333PS1984cm³DNFF, DNFG1) 281kW (382PS)2) 326kW (443PS)optionally in conjunction with the standard or Aulitzky exhaust system VW Tiguan (AD1)2.0 TSI180kW / 245PS1984cm³DNPA1) 227kW (309PS)2) 253kW (344PS)only in conjunction with the standard exhaust system VW Tiguan (AD1)R 2.0 TSI 4motion235kW / 320PS1984cm³DNFG1) 281kW (382PS)2) 326kW (443PS)only in conjunction with the standard exhaust system VW T-Roc (A1)R 2.0 TSI 4motion221kW / 300PS1984cm³DNFC1) 281kW (382PS)2) 326kW (443PS)only in conjunction with the standard exhaust system 1) with Wagner Turbo Outlet2) with Wagner Turbo Outlet + HJS downpipe

Includes the following services: - Removing and replacing the connecting rod bearings - Check and measure crankshaft journals - Check and adjust the oil pump - Clean all parts - Wheel alignment - Oil & filter change - incl. all parts such as bearings, screws, seals, oil filter and engine oil (10W60) - Entry in the service booklet with BMW registration number stamp - 1 litre oil refill In addition, and depending on requirements, we can also replace the spark plugs and engine mounts for an additional charge. Please note: This service can only be carried out at our company headquarters!

Facts: Performance increase (standard Golf R): 10-13hp, 12-15Nm Performance increase (tuned Golf R): 15-20hp, 25-30Nm Material: Carbon fibre Manufacturer: Eventuri Parts certificate: A certificate is available for this product for certain regions and vehicles (details below) The MK8 Golf GTi/R intake manifold is a complete revision of the standard intake manifold up to the turbo inlet. Taking inspiration from our RS3 intake, we have maximised the space available to create an intake that is suitable for all power levels, from standard specification through to high performance systems with hybrid or full frame turbos. This intake system has been developed to provide the highest possible flow rate whilst achieving the lowest possible intake temperatures. Each component has been designed to give the turbo a smooth and clear flow path. The restrictive standard intake pipe with a diameter of 73 mm is replaced by an intake pipe with a larger diameter of 94 mm. The filter itself has an outer diameter of 192mm or 7.5? with a filter area of over 110,000mm^2. The patented Venturi housing is designed to provide the largest possible internal volume for the available space in the Golf engine bay and provides laminar flow to the turbo pipe. Finally, the duct seals the filter opening at the windscreen, but is not restricted by the standard intake alone. We have raised the front of the duct to now create an additional opening behind the bonnet, equivalent to an extra 7? diameter hole for the inlet to draw from. The resulting system can significantly outflow the stock airbox while keeping intake temperatures to a minimum with the sealed design. Dyno testing Our MK8 Golf intake has been independently tested by a renowned tuner in the UK, Regal Autosport. A MK8 Golf R was tested in original condition and with a tuning box. The tests were carried out on the same day, with the standard airbox being tested first and then the Eventuri. No other changes were made to the car. The first graph shows the results with a stock map. As can be seen, there is a measurable gain across the rev range of up to 12bhp. This gain is noticeable even in a standard vehicle on the road due to better throttle response and faster acceleration. The second diagram shows the results when using a tuning box that increases the flow requirement of the intake system. The tuning box was used for both the standard airbox and the Eventuri intake, with no changes made between tests. With a higher flow requirement, the stock airbox places a greater restriction on the turbo, which is evident by the significant gain achieved with the Eventuri fitted. We now have a power increase of up to 20 hp and 30 Nm across the entire rev range, which is even more noticeable on the road. We expect the gains to be even greater with higher tuning levels. The improvements are due to a combination of reasons: 1) The closed system keeps IAT levels low - the Golf's engine bay can heat up very quickly, so an open cone filter leads to an increase in IAT levels and therefore a loss of power. 2) The Venturi housing provides a smooth transition from the filter to the intake pipes, both of which are matched to an internal diameter of 94mm. This contributes to a more efficient operation of the turbo. 3) The entire system is made from pure pre-impregnated carbon fibre, which provides excellent insulation against heat and has smooth internal surfaces, unlike glass fibre, which has sharp resin lines. Parts certificate The manufacturer's specifications apply for installation. An existing certificate is no guarantee that the product can also be installed in the corresponding vehicle. A certificate is available for this product for the following regions and vehicles: * DE/AT: Vehicle registration document, field K --- CH/LI: Vehicle licence, field 24 Country Model Type approval* DE/AT Audi S3 (8Y) e1*2007/46*2060*.. DE/AT Audi TTS (FV/FVP/8S e1*2001/116*0369*.. DE/AT Cupra Ateca LCI e9*2007/46*6394*.. DE/AT Cupra Formentor e9*2007/46*4008*.. DE/AT Cupra Leon e9*2007/46*3167*.. DE/AT Skoda Octavia RS e8*2007/46*0355*.. DE/AT Skoda Superb e8*2007/46*0317*.. DE/AT Volkswagen Arteon R e1*2007/46*1725*.. DE/AT Volkswagen Golf 8 GTI e1*2007/46*2014*.. DE/AT Volkswagen Golf 8 GTI CS e1*2007/46*2014*.. DE/AT Volkswagen Golf 8R e1*2007/46*2014*.. DE/AT Volkswagen Tiguan R e1*2001/116*0450*.. DE/AT Volkswagen Tiguan R (AD1) e1*2007/46*0487*.. Compatible vehicles: VehicleVehicle typePowerEngine capacityEngine type Audi A3 (8Y)S3 2.0 TFSI quattro228kW / 310hp1984cm³DNFB Audi Q2 (GA)SQ2 2.0 TFSI quattro221kW / 300hp1984cm³DNFC Cupra Ateca (KH)2.0 TSI 4Drive221kW / 300hp1984cm³DNFC Cupra Leon (KL)2.0 TSI221kW / 300hp228kW / 310hp1984cm³DNFCDNFB Cupra Formentor (KM)2.0 TSI 4Drive228kW / 310hp1984cm³DNFB VW Arteon2.0 TSI 4motionR 2.0 TSI 4motion206kW / 280hp235kW / 320hp1984cm³DNFEDNFG VW Golf 8GTI Clubsport/ED45 2.0 TSI221kW / 300hp1984cm³DNFC VW Golf 8R 2.0 TSI 4motionR 2.0 TSI 4motion 20Years235kW / 320hp245kW / 333hp1984cm³DNFGDNNF VW Passat B8 (3G)2.0 TSI 4motion206kW / 280hp1984cm³DNFE VW T-Roc (A1)2.0 TSI 4motion221kW / 300hp1984cm³DNFC VW Tiguan II (AD)R 2.0 TSI 4motion235kW / 320hp1984cm³DNFG

KW coilover springs The spring set with stepless lowering KW coilover springs are used to lower the vehicle in combination with the standard dampers. In contrast to conventional spring sets, individual height adjustment is possible within the tested adjustment range. This solution uses vehicle-specific spring mounts with matched KW lowering springs and suitable elastomers as well as dust protection systems. The standard damper system, for example with electronic or hydraulic control, remains active. Setup - sporty and harmonious spring rates The high-quality chrome-silicon steel springs used by KW coilover springs are matched to the respective standard suspension dampers and wheel loads in their spring rate for each specific vehicle. When developing the respective spring sets, we ensure that the spring rates also harmonise perfectly with the different damper characteristics of your adaptive standard suspension. So even with a KW coilover spring set, you will experience your car more directly and dynamically. KW coilover springs are suitable for car drivers who want to lower their vehicle discreetly and take advantage of an individual adjustment range. Stepless lowering Similar to a coilover suspension, the KW coilover springs allow a stepless lowering in a discreet range. This is not possible with conventional lowering springs. The dust protection elements and spring travel limiters included in the scope of delivery are always adapted to the maximum possible lowering. This means that the height-adjustable KW springs can be used to achieve a sporty, harmonious driving behaviour without compromising the driving dynamics of performance-oriented vehicles. Please note the conditions and instructions for this product: - VA + HA height-adjustable (spring set consisting of VA+HA springs with height adjustment, can only be used with standard dampers) Technical information: Lowering VA/HA (mm): 10-40/15-45 Adjustment HA: Thread Approval: Parts certificate (§19.3) Scope of delivery: Set (VA+HA) Compatible vehicles: Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive AUDI A6 (4F) 4F2, C6 04/2004-08/2011 RS6 quattro notchback Petrol 426 KW 4991 ccm 10 All-wheel drive AUDI A6 Avant (4F) 4F5, C6 11/2004-08/2011 RS6 quattro estate Petrol 426 KW 4991 ccm 10 All-wheel drive

H&R lowering springs for F90 models from 2018 (VA20-30/HA20-30mm) H&R sports spring kits are the ideal solution if you want to optimize the handling of your vehicle and achieve a sporty look while maintaining the standard driving comfort. Details:Lowering VA/HA Sedan: 30/30mmLowering VA/HA Competition Sedan: 20/20mmSuspension: for vehicles with electric damper controlType of approval: with general operating permit (ABE) Product advantages:Sporty look and performanceLowering of the vehicle's center of gravityLinear or progressive suspension characteristicsCan be combined with standard or retrofit dampersOptimized driving dynamicsSurface protection through powder coatingMade in Germany Compatible vehicles:BMW M5 Sedan F90 type F5LM only with adaptive damper control 2018- front axle 30mm / rear axle 30mmBMW M5 Competition Sedan F90 type F5LM, only with adaptive damper control 2018- front axle 20mm / rear axle 20mm