Intake system Carbon | fits BMW M135i/M235i (F20/F22), 335i/435i (F30/F32), M2 (F87) N55 | Eventuri

Facts: Material: Carbon Manufacturer: Eventuri Expert opinion: Material certificate The Eventuri carbon engine cover for F87 supports the intake system in a visual way. This cover is only designed for the F87, as an extra indentation is incorporated into which the original stripe can be inserted. However, this is not supplied with the cover, but must be taken from the original cover! The cover thus creates a unique carbon look in the blink of an eye and also ensures envious glances when looking under the bonnet.Compatible vehicles:VehicleTypePowerEngine capacityEngine typeYear of construction BMW 2 Series Coupe (F87)M2272kW / 370hp2979cm³N55 B30 A11.15 - 06.18

Facts: Material: Carbon Manufacturer: Eventuri Expertise: Material certificate This new addition to our N55 intake system isolates the intake path from the engine bay and prevents heat from entering at low rpm or when the engine is not running. The sealed carbon air duct closes the front of the filter housing and prevents heat from entering the filter area while allowing some air to enter from the cold side of the engine bay where the cowl meets the wing, ensuring that there is no restriction. In addition, the heat shield completely blocks the hot air being forced into the engine compartment from the radiator. The improvement of the improvement! Compatible vehicles:VehicleTypePowerEngine capacityEngine typeYear of construction BMW 1 Series (F20/F21)M135i / xDrive235kW / 320hp240kW / 326hp2979cm³N55 B30 A12.11 - 02.1503.15 - 06.16 BMW 2 Series (F22/F23)M235i / xDrive240kW / 326hp2979cm³N55 B30 A10.13 - 06.16 BMW 2 Series Coupe (F87)M2272kW / 370hp2979cm³N55 B30 A11.15 - 06.18 BMW 3 Series (F30/F31/F34)335i / xDrive225kW / 306hp240kW / 326hp250kW / 326hp2979cm³N55 B30 A11.11 - 07.1511.11 - 06.1307.13 - 06.16 BMW 4 Series (F32/F33/F36)435i / xDrive225kW / 306hp250kW / 340hp2979cm³N55 B30 A07.13 - 02.16

The rear spoiler made of Pre-Preg carbon fibre gives your vehicle a distinctly sporty aggressiveness and gives it a lot of presence on the road.Details:- Constructed from 100% pure pre-preg carbon fibre- OEM style weave- High-gloss finish- Perfect fit- registration according to §21 possible Scope of delivery:1x ducktail in prepreg carbon Compatible vehicles:BMW M5 G90BMW i5 G60BMW 5 Series G60Note: This is NOT an original BMW product!

The carbon front intakes are an absolute highlight for your vehicle and give it an even sportier look.Key features:- 100% pure prepreg carbon fibre- OEM style weave- High gloss finish- Fitment guarantee- 1 year warranty - With parts certificate according to §19.3 Scope of delivery:1x front spoiler made of glossy prepreg carbon fiber incl. mounting material Compatible vehicles:BMW G80 M3 SedanBMW G81 M3 TouringBMW G82 M4 CoupeBMW G83 M4 Convertible Note: This is NOT an original BMW product!

Material: Carbon Manufacturer: Eventuri Parts certificate: Material certificate Compatible vehicles:VehicleVehicle typePowerEngine capacityEngine type Audi A3 (8V)RS3 quattro294kW / 400hp2480cm³DAZA, DNWA Audi A3 (8Y)RS3 quattro294kW / 400hp2480cm³DNWC Audi TT (8J1/8S)TTRS quattro294kW / 400hp2480cm³DAZA, DNWA Audi Q3 (F3) 2019+RSQ3 quattro294kW / 400hp2480cm³DAZA, DNWA Cupra Formentor (KM)VZ5 4Drive287kW / 390hp2480cm³DNWB

KW HLS Hydraulic Lift System For easy driving over various obstacles for sporty cars with low ground clearance More ground clearance at the touch of a button With the HLS lift system, you can raise your sports car or lowered vehicle to safely drive over obstacles such as speed bumps, speed humps, level crossings, construction sites, garage and underground parking garage entrances. Depending on the version of the HLS lift system installed, either the front axle or both axles of your vehicle are raised hydraulically by up to 45 millimetres. This prevents your aerodynamic components, underbody protection or even the oil pan from being damaged. Depending on the vehicle type and model, the lift system is available as a vehicle-specific solution with or without KW coilover suspension. If your vehicle is not yet included in our KW HLS product range, our engineers have also developed a universal lift system. Convincing solution made by KW Our HLS is available as an application-specific solution for a wide range of super sports cars and even for compact models. All the components supplied, such as the hydraulic lines and hydraulic pump, are adapted to your vehicle and therefore all our components harmonize perfectly with your sports car. Whether you combine the HLS with your standard suspension or with our KW coilovers in stainless steel, which are among the world's top aftermarket products, is up to you to decide. Alpina, BMW M, Manthey, Mercedes-Benz AMG, Novitec Rosso and many other well-known companies in the international automotive industry have already opted for KW. The "HLS 2" version of the lift kit, which is only installed on the front axle, allows you to lift the front of your sports car. If you opt for the "HLS 4" variant, your entire vehicle will be lifted. For this purpose, a hydraulic cylinder is mounted between the spring plate and spring on each KW coilover strut. The great advantage of the hydraulic system is that there is no compression (movement) of the extended cylinder unit during driving (no unwanted additional suspension) and therefore the driving dynamics cannot be impaired. The scope of delivery for all HLS Lift Kit variants also includes a control unit that is connected to the vehicle's on-board electronics. As a result, the vehicle is automatically lowered to the original depth of the KW coilover suspension or your standard suspension from a certain speed. - as a complete solution including KW coilover suspension - or available as a retrofit kit - Actuation from inside the vehicle via button with LED position indicator or optionally via radio remote control - Can be activated while driving (up to 80 km/h) - Quick lifting in 4-5 seconds with HLS 2 - Absolutely corrosion-resistant (coated aluminum cylinder components) Please note the conditions and instructions for this product: - VA + HA height-adjustable (coilover struts) - Dampers have easy-to-use adjustment wheels. Due to the design, the rebound stage can only be adjusted when the piston rod is accessible. - Electronic damper control must be deactivated. Electronic kit for deactivation is included in the scope of delivery. - Aluminum shock absorbers (no Inox-line) Technical information: Lowering VA/HA (mm): 5-25/5-25 Design: HLS 2 Mounting position hydraulics: VA Material coilover suspension: aluminum Height adjustment: rebound and compression Adjustment VA/HA: thread/thread Approval: parts certificate (§19.3) Compatible vehicles: Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive MERCEDES-BENZ AMG GT (C190) 197 10/2014- GT R (190.379) Coupe Petrol 430 KW 3982 ccm 8 Rear-wheel drive Only models Year of manufacture: 03/2017- Axle load VA/HA (kg): -905/-1075 not for GT R Pro