Intake system Carbon | fits BMW M3 (E90/E92/E93) 420hp S65 | Eventuri

Facts: Material: Carbon Manufacturer: Eventuri Parts certificate: A certificate is available for this product for certain regions and vehicles (details below) Parts certificate The manufacturer's specifications apply for installation. The availability of a certificate is no guarantee that the product can be installed in the corresponding vehicle. A certificate is available for this product for the following regions and vehicles: * DE/AT: Vehicle registration document, field K --- CH/LI: Vehicle licence, field 24 Country model type approval* DE/AT BMW E90 M3 e1*2007/46*0377*.. DE/AT BMW E92 M3 e1*2007/46*0377*.. DE/AT BMW E93 M3 e1*2007/46*0377*.. DE/AT BMW GTS e1*KS07/46*0012*.. DE/AT BMW M3 e1*2001/116*0345*.. CH/LI BMW M3 1BB471 CH/LI BMW M3 1BB570 CH/LI BMW M3 1BB607 CH/LI BMW M3 1BB669 CH/LI BMW M3 1BB955-1BB957 CH/LI BMW M3 1BC611-1BC612 Compatible vehicles: VehicleVehicle typePowerEngine capacityEngine typeYear of constructionBMW 3 Series (E90/E92/E93)M3309kW / 420hp3999cm³S65 B40 A06.07 - 06.13

Facts: Material: Carbon Manufacturer: Eventuri Parts certificate: without A legendary add-on for a legendary car! Our E9X carbon ducts are a direct replacement for the OEM plastic ducts to add the finishing touches to the engine bay. These ducts are made from prepreg carbon and match the rest of our E9X range for the ultimate OEM+ theme. We have also replaced the flexible connector between the ducts and the airbox with an EPDM coupling with our raised V logo. During development we considered adding air scoops to the front duct, but after analysis we realised that there was no performance benefit due to the small opening between the ducts and the airbox, so we decided not to add air scoops. This also leaves the grill openings clear for optimum flow to the radiator. The Eventuri carbon ducts are available in both gloss and matte finishes to match our plenum, intake and airbox lid. Each set consists of: Carbon fibre front duct Carbon fibre rear duct Customised EPDM coupler Compatible vehicles: VehicleVehicle typePowerEngine capacityEngine typeYear of constructionBMW 3 Series (E90/E92/E93)M3309kW / 420hp3999cm³S65 B40 A06.07 - 06.13

Facts:Material: CarbonManufacturer: EventuriParts certificate: A certificate is available for this product for certain regions and vehicles (details below) Introducing our E9X carbon fiber air collector. Made from 100% high quality prepreg carbon including the inner trumpets, this air collector replaces the stock plastic version and unleashes the roar of the naturally aspirated V8 engine.As the trumpet lengths are tuned to the inner volume, changing this setting can result in a loss of power, so we have kept the same volume so as not to affect the way the car drives in terms of power delivery. Although there is no performance gain from the carbon plenum, the intake noise produced takes the driving experience to a whole new level. We went through several iterations with different material thicknesses to fine tune the sound, and the resulting plenum produces an almost unbelievable intake sound! This plenum can be used with the OEM airbox or any other aftermarket intake system, including our own Eventuri intake systems for a real performance boost. Parts certificateThe manufacturer's specifications apply to installation. An existing certificate is no guarantee that the product can also be installed in the corresponding vehicle. A certificate is available for this product for the following regions and vehicles:* DE/AT: Vehicle registration document, field K --- CH/LI: Vehicle registration document, field 24Country model type approval*DE/AT BMW E90 M3 e1*2007/46*0377*..DE/AT BMW E92 M3 e1*2007/46*0377*..DE/AT BMW E93 M3 e1*2007/46*0377*..DE/AT BMW GTS e1*KS07/46*0012*..DE/AT BMW M3 e1*2001/116*0345*.. Compatible vehicles:VehicleVehicle typePowerEngine capacityEngine typeYear of construction BMW 3er (E90/E92/E93)M3309kW / 420hp3999cm³S65 B40 A06.07 - 06.13

These PaddleShifterz aluminium paddle shifters fit the G-series steering wheel. They are a complete replacement for the OEM paddle shifters in your vehicle. They are finished in silver and take the look of your vehicle interior to the next level. Ergonomics was a key consideration during development, as the paddle shifters should not only look good, but also function as expected. They have been designed to work better than the OEM paddle shifters. They are fitted as a direct replacement for the OEM paddle shifters. No additional adapters or mounting hardware are required.Simply remove the original part and insert the new paddle shifters - it's easy! Scope of delivery:- 2x shift paddles (left and right) in silver- Made from aluminium, CNC-milled Compatible vehicles:BMW 1 Series (2019+, F40)BMW 2 Series (2020+, F44)BMW 3 Series (2018+, G20, G21)BMW 4 Series (2020+, G22, G23, G26)BMW 5 Series (2017+, G30, G31)BMW 7 Series (2015+, G11, G12)BMW 8 Series (2018+, G14, G15, G16)BMW M3/Competition (2021+, G80, G81)BMW M4/Competition (2021+, G82)BMW M5/M5/Competition (2017+, F90, F90 LCI)BMW M8 Competition (2018+, F91, F92, F93)BMW X3/X3M/Competition (2017+, G01, F97)BMW X4/X4M/Competition (2018+, G02, F98)BMW X5/X5M/Competition (2019+, G05, F95)BMW X6/X6M/Competition (2019+, G06, F96)BMW X7/X7M (2019+, G07)BMW Z4 G29Toyota Supra MK5

Facts: - 2x 3.15" (80mm)/ 2.56" (65mm), replaces the main catalytic converter - with 200 cell stainless steel sports catalytic converter - Euro 6 compatible - with Thermo-Integral insulation - with ECE approval* Compatible vehicles:VehicleVehicle typePower outputEngine capacityEngineYear of construction BMW 2 Series (F87)M2 Competition302kW / 411PS2979cm³S55 B30 A06.18-06.21 BMW 2 Series (F87)M2 CS331kW / 450PS2979ccS55 B30 A11.19-06.21 Note: Depending on the software version, the engine control light may light up. We recommend a software adjustment in this case. *This downpipe has ECE approval so that it can be used within the scope of the German Road Traffic Licensing Regulations (StVZO) without registration in the vehicle documents.

Suitable for the following vehicles:Audi S3 8Y 2.0TFSI 228KW/310hp (from 10/2020 MKB: DNFB)Audi TT 8S 45TSI 180kW / 245hp (from 10/2020 MKB: DNPA)Audi TTS 8S 235KW/320hp (from 11/2020 MKB: DNFD)VW Golf VIII type CD2.0 GTI 180kW / 245hp (from 08/2020 MKB: DNPA)VW Golf VIII type CD2.0 GTI Clubsport 220KW/300hp (from 10/2020 MKB: DNFC)VW Golf VIII Type CD2.0 R 235KW/320hp (from 12/2020 MKB: DNFG)VW Passat B8 2.0TSI 206KW/280hp (from 11/2020 MKB:DNFE)VW Arteon (type 3H) 2.0TSI R 206-235KW / 280-320hp (from 12/2020 MKB: DNFE, DNFG)VW T-Roc R 221kW/300hp (from 10/2020 MKB: DNFC)Cupra Leon IV KL Cupra TSI 4Drive 228KW/310hp (from 02/2021 MKB: DNFB)Cupra Formentor VZ 2.0TSI 180kW / 245hp (from 03/2021 MKB: DNPA)Cupra Formentor VZ 2.0TSI 228kW / 310hp (from 11/2020 MKB: DNFB)Skoda Octavia NX 2.0 TSI RS 180kW / 245hp (from 09/2020 MKB: DNPA)Skoda Superb 3V 2.0TSI 206KW/280hp (from 11/2020 MKB:DNFE) With parts certificate! With our Wagner Tuning Competition intercooler, we offer you the perfect solution to exploit the full potential of your vehicle and experience an extraordinary driving experience. With impressive mesh dimensions of 620 mm x 440 mm x 65 mm and an external charge air volume of 17.7 liters (compared to 9 liters for OEM), this high-performance charge air cooler ensures optimum cooling of the charged air. Our newly developed competition high-performance mesh (Tube Fine) not only enables excellent cooling performance, but also ensures sufficient airflow for adjacent components such as the water cooler. The intercooler remains lightweight and weighs only 9.2 kg in total. The cast aluminium end boxes have been optimized using CAD technology and CFD simulations to achieve optimum internal airflow. An integrated air duct in the end box ensures even filling of the competition high-performance mesh. With an inlet and outlet diameter of Ø70 mm, this intercooler offers a significantly lower back pressure compared to the intercooler fitted as standard. In addition, all our charge air coolers are provided with a high-quality anti-corrosion coating, which not only ensures protection against environmental influences, but also has superior heat conduction properties. This ensures a long-lasting and optimum cooling effect with a noticeable increase in performance. Installation is carried out by simply replacing the OEM intercooler and is straightforward. You can rely on our constant quality monitoring to offer you only the highest quality products. Boost your vehicle's performance to a new level and rely on the Competition intercooler. Treat yourself to the upgrade your vehicle deserves! Important information!Our intercooler is currently only compatible with the 5Q0-121-251GN engine water cooler. We are currently working on a solution for vehicles equipped with the current 5WA121251H engine water cooler. Scope of delivery:1 intercooler2 silicone hoses4 hose clamps1 mounting material1 assembly instruction1 parts certificate With parts certificate (for easy registration according to §19 paragraph 3 of the StVZO).

Our cooling air intakes are designed and engineered to overcome these factory limitations and deliver the maximum airflow with the lowest possible temperatures given the space constraints. The BlackBoost Cold Air Intakes are designed to be flush with the hood of the vehicle and provide an even seal with the rubber gaskets of the airbox, while also ensuring a large surface area for our 4. 3 inch Twin Flow Conical Filters to work properly. We have redefined our new generation intake with molded synthetic composite intake tubes that are CFD engineered to achieve the best airflow. With a smallest diameter of 80 mm, we have completely oversized the pipes compared to our previous generation. The pipes are equipped with 1/8 inch NPT connections for methanol injection. Couple the molded synthetic composite intake tube with the BlackBoost dual flow filters specifically designed for maximum airflow and surface area. These dry filters guarantee you the best flow and protection. The airboxes are laser-cut AL panels with highly complex CNC bends, assembled with stainless steel fasteners and finished with a high-quality black powder coating. The BlackBoost intake kit is a plug and play solution, works perfectly without further modification and no additional software tuning is required. It also works seamlessly with turbo upgrades, downpipes, methanol injection and more to deliver the necessary airflow to unleash the full capacity of the engine for those seeking 1000+ horsepower figures. What's Included:- Powder coated airbox- High flow oval dual dry filters- Oversized intake manifold made from molded synthetic composite material- Turbo coupling - 2 holes- 1/8 NPT plug- AMG badge transfer kit- Engine coverKey features:- Proven performance increase of 8-30+ hp on production vehicles- Improved responsiveness across the entire rev range- Optimized airflow and increased volume range compared to standard equipment- Molded synthetic composite intake manifold for optimal airflow- 1/8 NPT connection in the pipe for methanol injection- Increased surface area of filter element- Supports airflow for 1000+ WHP configurations- Increased surface area of filter element compared to OEM- Plug and play bolt-on installation- No ECU tuning required- No illumination of the check engine light Compatible vehicles:E63(S) AMG (W213/S213) - M177 LS2 4.0L V8 BiTurbo - (2017 - 2020)E63(S) AMG (W213/S213) Facelift - M177 LS2 4.0L V8 BiTurbo - (2021+)GT63(S) AMG (X290) - M177 LS2 4.0L V8 BiTurbo - (2019+)