Free shipping
info@aulitzkytuning.ae
+971581853418

KW V1 coilover suspension inox | fits BMW 3/4 Series xDrive (F30/F32) | 1022000S | 1022000U

From AED 5,258.90*

Delivery time: Availability on request at Aulitzky Tuning*

Does the vehicle have electronic damper control?
Optional: Installation on site at Aulitzky Tuning

- Installation and removal of coilover suspension
- Wheel camber correction kit
- Wheel alignment
- Calibration of assistance systems/lights
- Individual suspension tuning according to customer requirements
- Individual test drive and adjustment together with the customer

Assembly at location DE-91564 Neuendettelsau
Reset choice
AED 0.00*
Product number: KW1022000SU
Product information "KW V1 coilover suspension inox | fits BMW 3/4 Series xDrive (F30/F32) | 1022000S | 1022000U"

KW V1 coilover suspension

Sportiness paired with outstanding looks. With factory pre-configured damping.
Our entry-level model for more driving pleasure through an appealing and individually adjustable lowering is the KW V1 coilover suspension in the KW typical "inox-line". Thanks to its high-quality workmanship, the consistent use of stainless steel struts, corrosion-resistant springs and harmonised components, it stands for many years of driving pleasure - and not just for the life of the car.

Stepless lowering
The KW V1 enables maximum lowering within the tested adjustment range. This varies depending on the vehicle model and can, for example, be between 30 and 70 millimetres or 50 to 90 millimetres for an individual lowering. Thanks to the dirt-resistant trapezoidal thread and the polyamide threaded ring, the stepless lowering can be varied quickly and easily even years later. Depending on the vehicle, lowering is carried out either on the wheel-guiding KW stainless steel suspension struts or, in the case of non-wheel-guiding double-wishbone rear axles, on the rear axle height adjustment.

The benchmark for sporty, dynamic tuning fans
With its harmonious basic set-up for sporty driving on the road, the KW V1 convinces the discerning tuning fan. Our development engineers determine a specific damper set-up and spring rate for each vehicle in order to enhance your driving pleasure with the optimum balance of sportiness and suitability for everyday use. After all, you are not buying just any coilover suspension, but a KW coilover suspension that has been specially developed and tuned for your vehicle type. As a manufacturer, KW only uses its own resources, high-quality components and the same damper technology as mass-produced manufacturers. With the KW V1, the rolling and rolling movements of the vehicle body are reduced during compression, allowing you to benefit from unadulterated directness and sportier handling when driving.

Our experience for your driving pleasure
As a manufacturer of customised suspension solutions for road and racing, we have been the market leader and innovation driver for over 25 years. No matter where in the world, sporty drivers, car manufacturers and tuners rely on our KW coilovers "Made in Germany". Every KW coilover suspension is subjected to extensive load tests during production and is developed and manufactured directly at our company headquarters in Fichtenberg, Swabia, in order to fulfil the high standards of our KW quality management. As a German manufacturer, it is a matter of course for us to provide a multi-year warranty on our KW coilover suspension kits, which exceed OEM quality and cover over 4,600 applications. When installed by one of our KW specialist dealers, the warranty is up to five years.

- Optimally adjusted in advance
- sporty and harmonious damping technology
- Stainless steel technology "inox-line"
- Individually height-adjustable
- Tested adjustment range
- Ready-to-install complete solution
- High-quality components for a long service life
- Complete documentation for easy handling

Setup - factory pre-configured damping setup
The KW V1 has a vehicle-specific, permanently configured damper setup. The spring and damper are perfectly matched to each other so that you experience an optimum balance of sportiness and suitability for everyday use when driving.

Even with a full payload and maximum axle loads, the dampers always work with a sporty characteristic curve. It is interesting to note that the KW V1 is particularly popular with tuning enthusiasts who prioritise the idea of show & shine.

Please note the conditions and instructions for this product:
- VA + HA height-adjustable (VA coilover struts, HA springs with height adjustment + damper)
- For vehicles with electronic damper control, this must be deactivated. Electronic kit for decommissioning is included in the scope of delivery for item variant "YES".

Technical information:
Product line: Street Performance
Lowering VA/HA (mm): 25-55/30-60
Version: V1
Hardness adjustment: none
Material: Stainless steel
Adjustment VA/HA: Thread/thread
Approval: Parts certificate (§19.3) 

Compatible vehicles:
Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive
BMW 3 Series (F30, F80) 3-HY, 3L, M3, M3 GTS 11/2011-10/2018 320 d xDrive notchback diesel 120 KW 1995 ccm 4 all-wheel drive
BMW 3 Series (F30, F80) 3-HY, 3L, M3, M3 GTS 11/2011-10/2018 320 d xDrive notchback diesel 140 KW 1995 ccm 4 all-wheel drive
BMW 3 Series (F30, F80) 3-HY, 3L, M3, M3 GTS 11/2011-10/2018 320 i xDrive notchback petrol 134 KW 1997 ccm 4 all-wheel drive
BMW 3 Series (F30, F80) 3-HY, 3L, M3, M3 GTS 11/2011-10/2018 320 i xDrive notchback petrol 135 KW 1997 ccm 4 all-wheel drive
BMW 3 Series (F30, F80) 3-HY, 3L, M3, M3 GTS 11/2011-10/2018 320 i xDrive notchback petrol 135 KW 1998 ccm 4 all-wheel drive
BMW 3 Series (F30, F80) 3-HY, 3L, M3, M3 GTS 11/2011-10/2018 328 i xDrive notchback petrol 179 KW 1997 ccm 4 all-wheel drive
BMW 3 Series (F30, F80) 3-HY, 3L, M3, M3 GTS 11/2011-10/2018 330 d xDrive notchback diesel 190 KW 2993 ccm 6 all-wheel drive
BMW 3 Series (F30, F80) 3-HY, 3L, M3, M3 GTS 11/2011-10/2018 330 d xDrive notchback diesel 210 KW 2993 ccm 6 all-wheel drive
BMW 3 Series (F30, F80) 3-HY, 3L, M3, M3 GTS 11/2011-10/2018 330 i xDrive notchback petrol 185 KW 1998 ccm 4 all-wheel drive
BMW 3 Series (F30, F80) 3-HY, 3L, M3, M3 GTS 11/2011-10/2018 335 d xDrive notchback diesel 230 KW 2993 ccm 6 All-wheel drive
BMW 3 Series (F30, F80) 3-HY, 3L, M3, M3 GTS 11/2011-10/2018 335 i xDrive notchback petrol 225 KW 2979 ccm 6 All-wheel drive
BMW 3 Series (F30, F80) 3-HY, 3L, M3, M3 GTS 11/2011-10/2018 335 i xDrive notchback petrol 240 KW 2979 ccm 6 all-wheel drive
BMW 3 Series (F30, F80) 3-HY, 3L, M3, M3 GTS 11/2011-10/2018 335 i xDrive notchback petrol 250 KW 2979 ccm 6 all-wheel drive
BMW 3 Series (F30, F80) 3-HY, 3L, M3, M3 GTS 11/2011-10/2018 340 i xDrive notchback petrol 240 KW 2998 ccm 6 all-wheel drive
BMW 3 Series (F30, F80) 3-HY, 3L, M3, M3 GTS 11/2011-10/2018 340 i xDrive notchback petrol 265 KW 2998 ccm 6 all-wheel drive
BMW 4 Series Coupe (F32, F82) 3C, M3, M3 GTS 07/2013-06/2020 420 d xDrive Coupe Diesel 120 KW 1995 ccm 4 all-wheel drive
BMW 4 Series Coupe (F32, F82) 3C, M3, M3 GTS 07/2013-06/2020 420 d xDrive Coupe Diesel 140 KW 1995 ccm 4 all-wheel drive 
BMW 4 Series Coupe (F32, F82) 3C, M3, M3 GTS 07/2013-06/2020 430 d xDrive Coupe Diesel 190 KW 2993 ccm 6 All-wheel drive
BMW 4 Series Coupe (F32, F82) 3C, M3, M3 GTS 07/2013-06/2020 430 d xDrive Coupe Diesel 210 KW 2993 ccm 6 All-wheel drive
BMW 4 Series Coupe (F32, F82) 3C, M3, M3 GTS 07/2013-06/2020 430 i xDrive Coupe Petrol 183 KW 1998 ccm 4 All-wheel drive
BMW 4 Series Coupe (F32, F82) 3C, M3, M3 GTS 07/2013-06/2020 435 d xDrive Coupe Diesel 230 KW 2993 ccm 6 All-wheel drive
BMW 4 Series Coupe (F32, F82) 3C, M3, M3 GTS 07/2013-06/2020 435 i xDrive Coupe Petrol 225 KW 2979 ccm 6 All-wheel drive
BMW 4 Series Coupe (F32, F82) 3C, M3, M3 GTS 07/2013-06/2020 435 i xDrive Coupe Petrol 250 KW 2979 ccm 6 All-wheel drive
BMW 4 Series Coupe (F32, F82) 3C, M3, M3 GTS 07/2013-06/2020 440 i xDrive Coupe Petrol 240 KW 2998 ccm 6 All-wheel drive
BMW 4 Series Coupe (F32, F82) 3C, M3, M3 GTS 07/2013-06/2020 440 i xDrive Coupe Petrol 265 KW 2998 ccm 6 All-wheel drive

Please enter a valid email address.
Please enter a valid question.
Fields marked with * are mandatory.

There aren't any asked questions yet.
Last seen products

Last seen products

Shroud Cooling Slam Panel Carbon | fits BMW M2/M3/M4 incl. Competition (G80/G81/G82/G83/G87) | Aulitzky Tuning
Transform the engine bay of your G8X with the pre-impregnated carbon replacement radiator shroud. Made from lightweight pre-preg carbon fibre. When you buy pre-preg carbon fibre, you are investing in a higher quality and more durable material that will outlast other forms of carbon fibre and potentially save you money in the long run. Assembly: Plug&Play Details:- 100% carbon fibre construction- High gloss finish- Performance style design- Supplied with 3M double-sided adhesive tape already attached- Use rubber adapter from the original engine cover + emblem- registration free Compatible vehicles with S58 engine:- BMW G87 M2 - BMW G80 M3 Sedan (2021+)- BMW G80 M3 Competition Sedan (2021+)- BMW G81 M3 Touring (2023+)- BMW G81 M3 Competition Touring (2023+)- BMW G82 M4 Coupé (2021+)- BMW G82 M4 Competition Coupé (2021+)- BMW G83 M4 Convertible (2021+)- BMW G83 M4 Competition Convertible (2021+) Note: This is NOT an original BMW product!

AED 2,164.45*
Rear spoiler Ducktail V-Style Carbon | fits BMW M8/8 Series incl. Competition Coupé (F92/G15) S63 | Aulitzky Tuning
The V-style carbon fibre ducktail is a sporty addition to your F92 and G15. Unlike regular carbon fibre, pre-preg carbon is reinforced to increase strength and durability. It can also be a staggering 70% lighter than other carbon fibre options.Prepreg carbon is far more uniform than other carbon types, meaning the likelihood of imperfections is drastically reduced. The manufacturing process eliminates unwanted air bubbles and results in a perfectly smooth and high-gloss finish. Details:- 100% pure prepreg carbon fibre construction- OEM-style weave- High gloss finish- Fit guarantee- Registration according to §21 possible Scope of delivery:- 1x V-Style Ducktail Compatible vehicles:BMW F92 M8 Coupé (2018+)BMW G15 8 Series Coupé (2018+) Note: This is NOT an original BMW product!

AED 1,261.09*
Mirror covers Carbon | fits BMW M5/5er/7er/i7 (G90/G99/G60/G61/G68/G70) | Aulitzky Tuning
The exterior mirror covers in glossy pre-preg carbon fibre give your standard mirror units a more premium look. Unlike regular carbon fibre, Pre-Preg carbon is reinforced to increase strength and durability. It can also be a staggering 70% lighter than other carbon fibre options.Prepreg carbon is far more uniform than other carbon types, meaning the likelihood of imperfections is drastically reduced. The manufacturing process eliminates unwanted air bubbles and results in a perfectly smooth and high-gloss finish. Details:- 100% pure prepreg carbon fibre construction- OEM-style weave- High gloss finish- Guaranteed fit- registration free Scope of delivery:- 1x pair of mirror caps Compatible vehicles:BMW M5 (G90)BMW M5 (G99)BMW 5 Series (G60)BMW 5 Series (G61)BMW 5 Series (G68)BMW i5 (G60)BMW 7 Series (G70) Note: This is NOT an original BMW product!

AED 1,983.78*
Turbo outlet | fits VAG 2.0TSI EA888 Gen.4 Golf 8 GTI, TT 8S, Octavia NX RS, Formentor VZ etc. 245hp | Wagner Tuning
Suitable for the following vehicles:Audi TT 8S 45 TFSI 2.0 TSI (EA888 Gen.4 DNP) 180kW / 245hpVW Golf VIII Type CD2.0 GTI (EA888 Gen.4 DNP) 180kW / 245hpVW Tiguan AD (FL) 2.0 TSI (EA888 Gen.4 DNP) 180kW / 245hpSkoda Octavia NX 2.0 TSI RS (EA888 Gen.4 DNP) 180kW / 245hpSkoda Kodiaq 2.0 TSI RS (EA888 Gen.4 DNP) 180kW / 245hpCupra Leon KL 2.0 TSI (EA888 Gen.4 DNP) 180kW / 245hpCupra Formentor VZ 2.0 TSI (EA888 Gen.4 DNP) 180kW / 245hp The Wagner Tuning Turbo Outlet has been specially developed for vehicles with the EA888 Gen.4 engine and Garrett turbocharger to optimise performance and response. With an innovative design and high-quality materials, this turbo outlet offers a plug-and-play solution for a wide range of vehicle models, including Audi, VW, Skoda and Seat. The Wagner Tuning Turbo Outlet is the ideal choice for discerning vehicle enthusiasts who want to get maximum power and performance from their vehicles.Optimised air mass flow: The Turbo Outlet has been developed using CFD flow simulations to maximise air mass flow and increase performance. Plug-and-play installation: Easy installation thanks to the plug-and-play design that allows direct replacement of the standard part. Reduction of turbulence: By increasing the internal diameter to Ø48mm, turbulence is minimised, resulting in improved airflow and optimised responsiveness. High-quality materials: CNC-machined from high-strength aluminium alloy and anodised black for durability and aesthetics.Made in Germany: Manufactured in Germany to the highest quality standards. Scope of delivery:1 x Turbo outlet (exhaust nozzle) With parts certificate (for easy registration according to §19 paragraph 3 of the StVZO).

AED 433.61*