Free shipping
info@aulitzkytuning.ae
+971 50 660 4009

KW V3 Leveling coilover suspension | fits BMW 3 Series RWD (F30) | 352082000F | 352082000G

From AED 10,167.48*

Delivery time: Availability on request at Aulitzky Tuning*

Does the vehicle have electronic damper control?
Optional: Installation on site at Aulitzky Tuning

- Installation and removal of coilover suspension
- Wheel camber correction kit
- Wheel alignment
- Calibration of assistance systems/lights
- Individual suspension tuning according to customer requirements
- Individual test drive and adjustment together with the customer

Assembly at location DE-91564 Neuendettelsau
Reset choice
AED 0.00*
Product number: KW352082000FG
Product information "KW V3 Leveling coilover suspension | fits BMW 3 Series RWD (F30) | 352082000F | 352082000G"

KW V3 levelling

You can't see it - you can FEEL IT!
The KW levelling suspensions are ideal for drivers who are not looking for maximum lowering, but are looking for the driving dynamics and driving comfort of a KW coilover suspension in combination with the almost original standard ground clearance.

The KW V3 levelling focuses on the combination of increased driving dynamics and driving comfort in conjunction with a minimum lowering or, if desired, raising. The KW V3 Leveling is the ideal retrofit suspension for frequent drivers on poorly developed secondary roads or drivers who mainly use their car in metropolises and urban areas with numerous speed bumps. The progressive suspension springs are clearly designed for increased ride comfort. Accordingly, the KW V3 levelling has an adjustable, comfort-oriented basic damper tuning. If required, the KW levelling enables an adapted level regulation in the range of + 5 - 20 mm.

The KW V3 Levelling is the ideal retrofit option for drivers who attach great importance to suitability for everyday use, increased ride comfort and a plus in sportiness. The separately adjustable dampers in compression and rebound with their "TVR-A" and "TVC-A" technology allow extensive damper tuning. This makes it easy to influence the turn-in behaviour, directional stability, tyre grip and handling characteristics significantly for safe controllability at the limit and increased ride comfort.

- Freely adjustable damping technology in rebound and compression damping
- inox-line stainless steel technology
- Individual stepless levelling adjustment
- Tested adjustment range
- high-quality components for a long service life
- Adjustable rebound damping with 16 precise clicks
- 12-way adjustable compression damping with click adjustment
- Unique, independently acting damping force adjustment

Please note the conditions and instructions for this product:
- VA + HA height-adjustable (VA coilover struts, HA springs with height adjustment + dampers)
- Dampers have easy-to-use adjustment wheels. Due to the design, the rebound stage can only be adjusted if the piston rod is accessible.
- On vehicles with electronic damper control, this must be deactivated.

Technical information:
Product line: Street Comfort
Level change (mm) between: VA -20 and 0 / HA -20 and 0
Design: V3 Leveling
Hardness adjustment: Rebound and compression
Material: Stainless steel
Adjustment VA/HA: Thread/thread
Approval: Parts certificate (§19.3)

Compatible vehicles:
Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive
BMW 3 Series (F30, F80) 3-HY, 3L, M3, M3 GTS 11/2011-10/2018 316 d Notchback Diesel 85 KW 1995 ccm 4 Rear-wheel drive
BMW 3 Series (F30, F80) 3-HY, 3L, M3, M3 GTS 11/2011-10/2018 318 d Notchback Diesel 100 KW 1995 ccm 4 Rear-wheel drive
BMW 3 Series (F30, F80) 3-HY, 3L, M3, M3 GTS 11/2011-10/2018 318 d notchback diesel 110 KW 1995 ccm 4 rear-wheel drive
BMW 3 Series (F30, F80) 3-HY, 3L, M3, M3 GTS 11/2011-10/2018 320 d notchback diesel 120 KW 1995 ccm 4 rear-wheel drive
BMW 3 Series (F30, F80) 3-HY, 3L, M3, M3 GTS 11/2011-10/2018 320 d notchback diesel 140 KW 1995 ccm 4 rear-wheel drive
BMW 3 Series (F30, F80) 3-HY, 3L, M3, M3 GTS 11/2011-10/2018 320 i notchback petrol 134 KW 1997 ccm 4 rear-wheel drive
BMW 3 Series (F30, F80) 3-HY, 3L, M3, M3 GTS 11/2011-10/2018 320 i notchback petrol 135 KW 1997 ccm 4 rear-wheel drive
BMW 3 Series (F30, F80) 3-HY, 3L, M3, M3 GTS 11/2011-10/2018 320 i notchback petrol 135 KW 1998 ccm 4 rear-wheel drive
BMW 3 Series (F30, F80) 3-HY, 3L, M3, M3 GTS 11/2011-10/2018 325 d notchback diesel 155 KW 1995 ccm 4 rear-wheel drive
BMW 3 Series (F30, F80) 3-HY, 3L, M3, M3 GTS 11/2011-10/2018 325 d Notchback Diesel 165 KW 1995 ccm 4 Rear-wheel drive
BMW 3 Series (F30, F80) 3-HY, 3L, M3, M3 GTS 11/2011-10/2018 330 d Notchback Diesel 190 KW 2993 ccm 6 Rear-wheel drive
BMW 3 Series (F30, F80) 3-HY, 3L, M3, M3 GTS 11/2011-10/2018 330 d notchback diesel 210 KW 2993 ccm 6 rear-wheel drive
BMW 3 Series (F30, F80) 3-HY, 3L, M3, M3 GTS 11/2011-10/2018 330 i notchback petrol 185 KW 1998 ccm 4 rear-wheel drive
BMW 3 Series (F30, F80) 3-HY, 3L, M3, M3 GTS 11/2011-10/2018 335 i notchback petrol 224 KW 2979 ccm 6 rear-wheel drive
BMW 3 Series (F30, F80) 3-HY, 3L, M3, M3 GTS 11/2011-10/2018 335 i notchback petrol 225 KW 2979 ccm 6 rear-wheel drive
BMW 3 Series (F30, F80) 3-HY, 3L, M3, M3 GTS 11/2011-10/2018 335 i notchback petrol 240 KW 2979 ccm 6 rear-wheel drive
BMW 3 Series (F30, F80) 3-HY, 3L, M3, M3 GTS 11/2011-10/2018 335 i notchback petrol 250 KW 2979 ccm 6 rear-wheel drive
BMW 3 Series (F30, F80) 3-HY, 3L, M3, M3 GTS 11/2011-10/2018 340 i notchback petrol 240 KW 2998 ccm 6 rear-wheel drive
BMW 3 Series (F30, F80) 3-HY, 3L, M3, M3 GTS 11/2011-10/2018 340 i notchback petrol 265 KW 2998 ccm 6 rear-wheel drive

Please enter a valid email address.
Please enter a valid question.
Fields marked with * are mandatory.

There aren't any asked questions yet.
Last seen products

Last seen products

Brake cooling set front + rear axle | fits BMW M2 (F87) | Aulitzky Tuning
In order to transport the air precisely to the brake system, a suitable inlet is essential. The F-series already has factory-fitted inlet ducts in the front bumper, but these end in the middle of the wheel arch. To ensure that the air let in through the inlet ducts of the front bumper is not randomly swirled around in the wheel arch, we have developed an inlet duct that can be fitted with little effort and directs the air precisely to the brakes - i.e. exactly where it is needed. The covers can optionally be fitted on the outside in front of the ventilation grilles as protection against moisture or similar. No fastening tools are required for installation on the front axle. They are fitted in exchange for the original duct support. The duct is based on the OEM duct and therefore uses exactly the same connection points and can be completely removed without leaving any residue. As the inside of the brake disk on the rear axle builds up very high temperatures, we have also developed an air duct here, which guides the air directly into the inside of the rim via a flow channel. Our brake cooling system is plug & play and requires no modifications to the vehicle. Scope of delivery: - 1x set front axle: 2x intake scoop L+R, 6x 3.6mm cable ties for scoop, 2x 4.8mm cable ties for hose holder, 2x hose holder (wheel housing) - 1x rear axle set: 2 rear air ducts L+R, 8x 4.8mm cable ties - Brake cooling hoses + anchor plates Compatible vehicles: BMW 2 Series (F87) Coupé M2 272kW / 370hp Attention: Without approval in the area of the StVZO.

AED 2,661.70*
Carbon side diffusers | fits BMW M3 incl. Competition (G80/G81) | Aulitzky Tuning
Made from state-of-the-art pre-preg carbon fibre, these side diffusers for the rear emphasise the character of your vehicle and make it stand out both on the road and online. Why do we use pre-preg carbon fibre?Unlike normal carbon fibre, pre-preg carbon is reinforced to increase strength and durability.It can also be a staggering 70% lighter than other carbon fibre options, ideal for weight saving.In terms of quality, pre-preg carbon is far more consistent, meaning that the likelihood of imperfections is drastically reduced.of imperfections is drastically reduced.The manufacturing process eliminates unwanted air bubbles and results in a perfect, smooth, sleekand high-gloss finish that is the ultimate piece to complement your vehicle. When you buy Pre-Preg, you are investing in a higher quality, more durable part that will outlast other forms ofoutlast other forms of carbon fibre and potentially save you money in the long run. Details:- 100% pure prepreg carbon fibre construction- OEM style weave- High-gloss finish- with parts certificate according to §19.3 Scope of delivery:1x set of side diffusers Compatible vehicles:- BMW G80 M3 Sedan (2021+)- BMW G80 M3 Competition Sedan (2021+)- BMW G81 M3 Competition Touring (2021+)Note: This is NOT an original BMW product!

AED 2,145.70*
Aulitzky Tuning Verkaufsfahrzeug | BMW M2 Competition S55 (F87) Tracktool
Erste Hand, unfallfrei Nur Shell V-Power oder Aral Ultimate Alle Services bei Aulitzky, BMW oder Raab Motorsport durchgeführt. Kein Wartungsstau. Kein Notverkauf. Fast alle Serienteile sind vorhanden (Sitz, Rücksitzbank, Ansaugung, Auspuff, Fahrwerk, Bremsbeläge…) TÜV komplett alles eingetragen (außer Bremsbeläge)   - Leistung Aulitzky mit Abstimmung für Rennstrecke. Ca. 520 PS und 700 NM     - Tracktool - Apple Carplay ganzer Bildschirm - Aulitzky App inkl. Dongle - Akrapovic Auspuff ab OPF - Liteblox Batterie - Bremsbeläge Pagid RSL29 vorne 70% hinten 95%  - Bremsbelüftung Speed Engineering - Bremskolben Edelstahl und spezielle Manchetten - Stahlflexbremsleitung - Charge und Boost Pipe - Clubsport Set und Teppich - CS Frontspoiler org. BMW - Diffusor org. BMW - Differential Westwood Performance mit Höherlegungskit - Display AK-Motion - Downpipe HJS - Eventuri Ansaugung - Fahrwerk KW Clubsport mit Nordschleifenabstimmung Wolfgang Weber - Felgensatz Protack One 10x19 ET20 und 10,5x19 ET40 mit Continental Sport Contact 7; 265/30/19 und 285/30/19 (80%) - auf Wunsch zweiter Felgensatz Protack One 10x19 ET20 und 10,5x19 ET40 mit Nankang CR-S; 265/30/19 und 285/30/19 NEU Stehbolzen - GTS Flash - Heckspoiler org. BMW - Hosenträgergurte Schroth - Kurbelwellensicherung Aulitzky - Ladeluftkühler Wagner - Recaro Pole Position inkl. Schiene - Spurstangen KW - Stabi VA H&R - Upgrade Zündspulen und Zündkerzen  - kleiner Achsstand Westwood Performance (Uniball VA und HA) Das Fahrzeug kann über unsere Hausbank finanziert werden. Bei Fragen und ernsthaftem Interesse freuen wir uns über eine Kontaktaufnahme.

AED 294,550.00*
Boost Controller | passend für MERCEDES 725.0 PERFORMANCE CLUTCH KIT | Blackboost
Boost Controller by BlackBoost. Precision-engineered performance upgrade for MERCEDES 725.0 PERFORMANCE CLUTCH KIT.

AED 11,077.40*
%
Front lip Carbon | fits BMW M3/M4 incl. Competition/CS/GTS (F80/F82) | 3DDesign
The 3DDesign carbon front lip for the F80 and F82 is made entirely of carbon fiber and thus easily meets lightweight construction requirements. Visually, the lip blends in perfectly with the sporty front of the vehicle. In addition, the front lip has a positive effect on the aerodynamic properties of the vehicle. Incl. parts certificate Compatible vehicles:BMW 3 (F30, F80) M3 2014-2018BMW 3 (F30, F80) M3 CS 2018-2018BMW 3 (F30, F80) M3 Competition 2016-2018BMW 4 Convertible (F33, F83) M4 2014-2020BMW 4 Convertible (F33, F83) M4 Competition 2016-2020BMW 4 Coupe (F32, F82) M4 2014-2020BMW 4 Coupe (F32, F82) M4 CS 2017-2019BMW 4 Coupe (F32, F82) M4 Competition 2016-2020BMW 4 Coupe (F32, F82) M4 GTS 2016-2019

AED 6,153.30* AED 10,255.50* (40% saved)
Front lip PUR | fits BMW X5 M-Package (G05) | 3DDesign
3DDesign PUR front lip for the G05 with M-package Compatible vehicles:BMW X5 (G05, F95) xDrive 25 d 2019-2023BMW X5 (G05, F95) xDrive 30 d 2018-2020BMW X5 (G05, F95) xDrive 30 d Mild-Hybrid since 2020BMW X5 (G05, F95) xDrive 40 d Mild-Hybrid Since 2020BMW X5 (G05, F95) xDrive 40 i 2018-2023BMW X5 (G05, F95) xDrive 45 e plug-in hybrid 2019-2023BMW X5 (G05, F95) xDrive 50 i 2018-2019BMW X5 (G05, F95) xDrive M 50 d 2018-2023BMW X5 (G05, F95) xDrive M50 i 2019-2023BMW X5 Van (G05) xDrive 30 d 2019-2023BMW X5 Van (G05) xDrive 40 i 2019-2023

AED 3,268.00*