KW coilover springs | height-adjustable spring kit | fits Audi RS4 quattro B7 sedan | 25310051

AED 0.00*

Prices incl. VAT plus shipping costs

Delivery time: Availability on request at Aulitzky Tuning*

Optional: Installation on site at Aulitzky Tuning

- Ein- & Ausbau der Gewindefedern
- Achsvermessung
- Kalibrierung der Assistenzsysteme/Licht

Assembly at location DE-91564 Neuendettelsau

Reset choice

AED 0.00*

place a request

Finanzieren Sie ihren Einkauf über die Targobank.

Product number: KW25310051

Product information "KW coilover springs | height-adjustable spring kit | fits Audi RS4 quattro B7 sedan | 25310051"

KW coilover springs

The spring set with stepless lowering
KW coilover springs are used to lower the vehicle in combination with the standard dampers. In contrast to conventional spring sets, individual height adjustment is possible within the tested adjustment range. This solution uses vehicle-specific spring mounts with matched KW lowering springs and suitable elastomers as well as dust protection systems. The standard damper system, for example with electronic or hydraulic control, remains active.

Setup - sporty and harmonious spring rates
The high-quality chrome-silicon steel springs used by KW coilover springs are matched to the respective standard suspension dampers and wheel loads in their spring rate for each specific vehicle. When developing the respective spring sets, we ensure that the spring rates also harmonise perfectly with the different damper characteristics of your adaptive standard suspension. So even with a KW coilover spring set, you will experience your car more directly and dynamically. KW coilover springs are suitable for car drivers who want to lower their vehicle discreetly and take advantage of an individual adjustment range.

Stepless lowering
Similar to a coilover suspension, the KW coilover springs allow a stepless lowering in a discreet range. This is not possible with conventional lowering springs. The dust protection elements and spring travel limiters included in the scope of delivery are always adapted to the maximum possible lowering. This means that the height-adjustable KW springs can be used to achieve a sporty, harmonious driving behaviour without compromising the driving dynamics of performance-oriented vehicles.

Please note the conditions and instructions for this product:
- VA + HA height-adjustable (spring set consisting of VA+HA springs with height adjustment, can only be used with standard dampers)

Technical information:
Lowering VA/HA (mm): 15-40/0-25
Adjustment HA: Thread
Approval: Parts certificate (§19.3)
Scope of delivery: Set (VA+HA)

Compatible vehicles:
Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive
AUDI A4 (8E) 8EC, QB6, B7 11/2004-06/2008 RS4 quattro notchback Petrol 309 KW 4163 ccm 8 All-wheel drive

Please enter a valid email address.

Your question *

Please enter a valid question.

I agree that my data will be processed to answer the question. I have taken note of the Privacy Policy and agree to the information described therein.*

To continue, enter the characters shown above*

Fields marked with * are mandatory.

There aren't any asked questions yet.

Last seen products

Door Set Carbon (4 pieces) | fits BMW 3 Series/M3 (G20/G80) | Aulitzky Tuning

Upgrade your G20/G80 with these carbon fibre doors that enhance both style and performance. Details:- Carbon fibre doors, made from high quality prepreg carbon fibre- Guaranteed accuracy of fit, 1:1 from the original- Largely reduced weight, the weight of the carbon fibre doors is less than 1/2 of the original doors.- Price is for 4 doors - front and rear Features:- Lightweight design: made from high quality carbon fibre, these doors are significantly lighter than the stock doors and reduce the overall weight of the vehicle for improved agility and acceleration.- Superior strength: Carbon fibre offers exceptional strength and rigidity, ensuring high durability and resilience while maintaining a slim profile.- Premium finish: The doors feature a high-gloss carbon fibre weave that gives your G20/G80 a refined, race-inspired look and complements its sporty design.- Exact fit: Designed specifically for the G20/G80, these doors offer a precise fit and seamless integration that meets OEM standards for alignment and function.- Improved performance: By reducing weight, these doors contribute to better handling, braking behaviour and improved driving dynamics.- Professional installation recommended: For best results, professional installation is recommended to ensure proper alignment and functionality with your vehicle's systems. Care instructions:Regular cleaning: Maintain carbon fibre parts by cleaning them regularly with a soft cloth and a mixture of mild soap and water. Avoid abrasive cleaners or harsh detergents that could damage the surface.Use microfibre pads and cloths: Use microfibre pads and cloths when cleaning or applying protective coatings to avoid scratching the surface.Protect the product from the sun and chemicals: Avoid direct sunlight and harsh chemicals, as these can damage the carbon fibre. If possible, use protective covers or park your vehicle in shaded areas. Installation:Although the installation of this product is relatively simple for the skilled DIY enthusiast, we still recommend installation by a professional mechanic.No special tools are required to install this product. Scope of delivery:- 4 carbon fibre doors (2x front doors per FS/BFS, 2x rear doors per FS/BFS)- Required mounting parts Compatible vehicles:All G20/G80 modelsNote: This is NOT an original BMW product!

AED 42,995.70*

Lowering springs Pro-Kit Performance VA+HA 20mm | fits BMW M3 incl. Competition (G80) S58 | Eibach

Eibach Pro-Kit performance suspension springs for front and rear axle E10-20-049-06-22 The Eibach Pro-Kit lowering springs are the ideal solution for your vehicle, as the kit lowers the centre of gravity, reduces rebound when accelerating, reduces body roll when cornering and dips when braking. As a result, understeer and oversteer no longer occur. Lowering the vehicle with the Pro-Kit springs reduces the standard distance between the tyres and the wheel arch and gives the vehicle a sporty look. In addition, the handling of the vehicle is maximised. The Eibach Pro-Kits are designed by Eibach suspension engineers and test experts to deliver a combination of sporty looks and performance without compromising on safety or ride quality. - Developed and tested for combination with standard and aftermarket dampers- Component of the Eibach Pro system- Top performance handling- Lowers the vehicle's centre of gravity by up to 40 mm (depending on the vehicle)- Spring design for traction and attraction- Progressive suspension characteristics- Performance handling- ABE or parts certificate Note: Only for vehicles without levelling control. Information:- Lowering front axle: approx. 20mm- Lowering rear axle: approx. 5-10mm- Type of approval: with expert opinion- Suspension: for all standard damping systems- Illustration may differ from the original Compatible vehicles:- Axle load front axle: up to 1165kg- Axle load rear axle: up to 1205kg- EC type approval number: e1*2018/858*00003*..- Only for vehicles without levelling control BMW 3 (G80) M3 480 HP / 353 KW 7909-ACUBMW 3 (G80) M3 Competition 510 hp / 375 KW 7909-ACVBMW 3 (G80) M3 Competition xDrive 510 hp / 375 KW 7909-ACZ

AED 1,698.50* AED 2,021.22* (15.97% saved)

Lowering springs Pro-Kit Performance VA+HA 25mm | fits BMW M5 incl. Competition/Edition (F10) S63 | Eibach

Eibach Pro-Kit performance suspension springs for front and rear axle E10-20-022-09-22 The Eibach Pro-Kit lowering springs are the ideal solution for your vehicle, as the kit lowers the centre of gravity, reduces rebound when accelerating, reduces body roll when cornering and dips when braking. As a result, understeer and oversteer no longer occur. Lowering the vehicle with the Pro-Kit springs reduces the standard distance between the tyres and the wheel arch and gives the vehicle a sporty look. In addition, the handling of the vehicle is maximised. The Eibach Pro-Kits are designed by Eibach suspension engineers and test experts to deliver a combination of sporty looks and performance without compromising on safety or ride quality. - Developed and tested for combination with standard and aftermarket dampers- Component of the Eibach Pro system- Top performance handling- Lowers the vehicle's centre of gravity by up to 40 mm (depending on the vehicle)- Spring design for traction and attraction- Progressive suspension characteristics- Performance handling- ABE or parts certificate Note: Only for vehicles without levelling control. Information:- Lowering front axle: approx. 25mm- Lowering rear axle: approx. 25mm- Type of approval: with expert opinion- Illustration may differ from the original Compatible vehicles:- Axle load front axle: up to 1180kg- Axle load rear axle: up to 1260kg- EC type approval number: e1*2007/46*0361*..- Only for vehicles without levelling system BMW 5 (F10) M5 412kW / 560hp 7909-AAYBMW 5 (F10) M5 Competition 423kW / 575hp 7909-ABCBMW 5 (F10) M5 30th Anniversary 441kW / 600PS 7909-ABI

AED 2,046.80* AED 2,435.69* (15.97% saved)

Lowering springs Pro-Kit Performance VA+HA 25mm | fits BMW 1 Series M (E82) N54 | Eibach

Eibach Pro-Kit performance suspension springs for front and rear axle E10-20-016-03-22 The Eibach Pro-Kit lowering springs are the ideal solution for your vehicle, as the kit lowers the centre of gravity, reduces rebound when accelerating, reduces body roll when cornering and dips when braking. As a result, understeer and oversteer no longer occur. Lowering the vehicle with the Pro-Kit springs reduces the standard distance between the tyres and the wheel arch and gives the vehicle a sporty look. In addition, the handling of the vehicle is maximised. The Eibach Pro-Kits are designed by Eibach suspension engineers and test experts to deliver a combination of sporty looks and performance without compromising on safety or ride quality. - Developed and tested for combination with standard and aftermarket dampers- Component of the Eibach Pro system- Top performance handling- Lowers the vehicle's centre of gravity by up to 40 mm (depending on the vehicle)- Spring design for traction and attraction- Progressive suspension characteristics- Performance handling- ABE or parts certificate Note: Only for vehicles without levelling control. Information:- Lowering front axle: approx. 25mm- Lowering rear axle: approx. 10mm- Type of approval: with expert opinion- Illustration may differ from the original Compatible vehicles:- Axle load front axle: up to 940kg- Axle load rear axle: up to 1030kg- EC type approval number: e1*2007/46*0383*..- Only for vehicles without levelling system BMW 1 (E82) Coupe M 250kW / 340PS 7909-AAU

AED 1,694.20* AED 2,016.10* (15.97% saved)

Side fins Carbon to match the carbon diffuser | fits BMW F90 M5 (F90) | 3D design | SPECIAL PRICE

The high-end kit for your high-end vehicle!The iconic design is complemented by a perfect fit. ATTENTION:These are only the fins to match the diffuser from 3D-Design!You will of course receive the fins for both sides. SPECIAL PRICE - SMALL DEFECTS (see pictures) Compatible vehicles:BMW 5 (G30, F90) M5 2017-2023

AED 4,295.70* AED 5,921.10* (27.45% saved)

Water cooler kit | fits Mercedes-Benz E63/E63S AMG (W213/S213) | Wagner Tuning

Suitable for the following vehicles: Mercedes Benz W213/S213 E63 AMG 420KW/571PS (from 2017) Mercedes Benz W213/S213 E63S AMG 450KW/612PS (from 2017) The 4.0L V8 biturbo engine of the E63 (S) models from AMG is equipped with an indirect charge air cooling circuit. This means that the charge air cooling process is not realised using the ambient air as a cooling medium (as usual), but with the help of a separate cooling water circuit. A reduction in the cooling water temperature can therefore be directly equated with an improved cooling performance of the charge air. This is precisely where the advantages of the WAGNER TUNING Upgrade water coolers come into play. The newly developed competition racing nets of the WAGNER TUNING high-performance water coolers increase the radiator volume of the standard water coolers by a total of 100 %. The ratio between the inner and outer cooling surface generates maximum heat transfer and at the same time allows the neighbouring components (e.g. the engine water cooler behind it) sufficient airflow for heat exchange. Furthermore, the water coolers are equipped with a thermally conductive anti-corrosion coating to ensure a long-lasting cooling effect. Installation of the system is also straightforward and plug & play with the help of our installation instructions. OEM front cooler dimensions: 640 mm x 430 mm x 27 mm V = 7.43 litres A = 2752 cm² WT front cooler dimensions: 645 mm x 390 mm x 52 mm V = 13.2 litres (+75%) A = 2539 cm² OEM side cooler dimensions: 260 mm x 213 mm x 32 mm V = 1.77 litres A = 553 cm² WT side cooler dimensions: 264 mm x 242 mm x 86 mm V = 5.5 litres (+210%) A = 638 cm² (+15%) Attention: Not authorised in the area of the StVZO.

AED 12,298.00*

KW coilover springs | height-adjustable spring kit | fits Audi RS4 quattro B7 sedan | 25310051

Ratenrechner

Ask a question

Previously asked questions