Lowering springs Pro-Kit Performance VA+HA 30mm | fits BMW 3 Series M340i/330i/320d/330d (G21) | Eibach

The Endless pads are an excellent brake pad for racing and everyday use. The MX87 is the further development of the MX72 and not only builds up friction with the disc faster, but is also more heat-resistant. Temperature range from 30-700CLow brake disc wearamazing longevity of the padReduction of heat cracksimproved response behaviourCoefficient of friction of 0.38-0.46 By far the greatest speciality, however, is the balancing act between suitability for everyday use and use on trackdays:This means that this rubber is suitable in every situation, whether on long trackdays, or in everyday use.However, if the vehicle is mainly used on the track, we recommend the N39S. For the front axle. Compatible vehicles:BMW 4-piston BMW (Performance) brake caliper, blue caliper on F-series vehicles, such as. M135i M140i F20 F21, M235i M240i F22 F23, 335i 340i F30 F31 F34, 435i 440i F32 F33 F36, M2 F87, M3 F80,M4 F82 F83Alpina models such as the B3Motorsport articles - without STVZO approval.

Eibach Pro-Kit performance suspension springs for front and rear axle E10-20-049-01-22 The Eibach Pro-Kit lowering springs are the ideal solution for your vehicle, as the kit lowers the centre of gravity, reduces rebound when accelerating, reduces body roll when cornering and dips when braking. As a result, understeer and oversteer no longer occur. Lowering the vehicle with the Pro-Kit springs reduces the standard distance between the tyres and the wheel arch and gives the vehicle a sporty look. In addition, the handling of the vehicle is maximised. The Eibach Pro-Kits are designed by Eibach suspension engineers and test experts to deliver a combination of sporty looks and performance without compromising on safety or ride quality. - Developed and tested for combination with standard and aftermarket dampers- Component of the Eibach Pro system- Top performance handling- Lowers the vehicle's centre of gravity by up to 40 mm (depending on the vehicle)- Spring design for traction and attraction- Progressive suspension characteristics- Performance handling- ABE or parts certificate Note: Only for vehicles without levelling control. Information:- Lowering front axle: approx. 20mm- Lowering rear axle: approx. 20mm- Type of approval: with expert opinion- Suspension: for all standard damping systems- Illustration may differ from the original Compatible vehicles:- Axle load front axle: up to 1165kg- Axle load rear axle: up to 1270kg- EC type approval number: e1*2018/858*00003..- Only for vehicles without levelling system BMW 4 (G82) M4 353kW / 480PS 7909-ACWBMW 4 (G82) M4 Competition 375kW / 510hp 7909-ACXBMW 4 (G82) M4 Competition M 375kW / 510hp 7909-ADABMW 4 (G83) M4 Competition M 375kW | 510hp 7909-ADB

The Air Intake Set for the G8X models made of carbon fibre gives your vehicle an upscale look. When you buy Pre-Preg carbon fibre, you are investing in a higher quality and more durable material that will outlast other forms of carbon fibre and potentially save you money in the long run. Scope of delivery:- 1x Air Intake Set Details:- 100% carbon fibre construction- High gloss finish- Fit guarantee Compatible vehicles with S58 engine:- BMW G80 M3 (all models)- BMW G81 M3 (all models)- BMW G82 M4 (all models)- BMW G83 M4 (all models) Note: This is NOT an original BMW product!

The Competition intercooler kit fits the following vehicles:Mercedes W 176 A160 1,6L 75KW/102hp (2016-2018)Mercedes W 176 A180 1.6L 90KW/122hp (2012-2018)Mercedes W 176 A200 1.6L 115KW/156hp (2012-2018)Mercedes W 176 A220 2.0L 135KW/184hp (2016-2018)Mercedes W 176 A250 2.0L 155-160KW/211-218hp (2012-2018)Mercedes W 176 A180 CDI 1.8L 80KW/108hp (2012-2014)Mercedes W 176 A200 CDI 1,8L 100KW/136hp (2012-2014)Mercedes W 176 A200 CDI 2,2L 100KW/136hp (2014-2018)Mercedes W 176 A220 CDI 2.2L 125KW/170hp (2012-2018)Mercedes C 117 CLA180 1.6L 90KW/122hp (2013-2019)Mercedes C 117 CLA200 1,6L 115KW/156hp (2013-2019)Mercedes C 117 CLA220 2.0L 135KW/184hp (2016-2019)Mercedes C 117 CLA250 2.0L 155-160KW/211-218hp (2013-2019)Mercedes C 117 CLA220 CDI 2.2L 125KW/170hp (2013-2019)Mercedes W 242 / W 246 B160 1.6L 75KW/102hp (2015-2019)Mercedes W 242 / W 246 B180 1.6L 90KW/122hp (2011-2019)Mercedes W 242 / W 246 B200 1,6L 115KW/156hp (2011-2019)Mercedes W 242 / W 246 B220 2.0L 135KW/184hp (2015-2019)Mercedes W 242 / W 246 B250 2.0L 155KW/211hp (2015-2019)Mercedes W 242 / W 246 B180 CDI 1.8L 80KW/108hp (2011-2014)Mercedes W 242 / W 246 B200 CDI 1.8L 100KW/136hp (2011-2014)Mercedes W 242 / W 246 B200 CDI 2.2L 100KW/136hp (2014-2019)Mercedes W 242 / W 246 B220 CDI 2.2L 125KW/170hp (2011-2019) Maximize the performance of your vehicle with our Competition high-performance intercooler! Unleash the true potential of your vehicle and experience the ultimate performance boost. With impressive mesh dimensions of 640mm x 200mm x 110mm and a remarkable capacity of 14,080cc, our Competition high performance intercooler offers a 25% larger flow area and an astonishing 110% more charge air volume compared to the standard intercooler. Our Competition high performance mesh exceeds all expectations when it comes to cooling performance. Even under extreme conditions, this intercooler keeps a cool head. Despite its impressive performance, this intercooler is surprisingly light at 10.5 kg. Thanks to our advanced technology and the use of cast aluminium for the free-form end boxes, we have minimized back pressure and maximized performance. Our intercoolers are equipped with an anti-corrosion coating with outstanding heat conduction properties. This guarantees permanent and optimal cooling, which is noticeable in a significant increase in performance. Our kit is completely ready to install, and replacement with the standard intercooler is straightforward - a true plug-and-play experience. This intercooler was developed to meet the highest demands of racing. With a pressure test of up to 6 bar, it is ready for action-packed racetracks. All our products are subject to strict quality control to ensure they meet the highest standards. Push your limits and boost your vehicle's performance to a new level. Our Competition high performance intercooler is the best choice for demanding drivers who want more. Ready for the ultimate driving experience? Get our Competition high performance intercooler today and feel the difference! Advantages of the Wagner Tuning intercooler:- improved cooling performance- 25% larger inflow area- 110% more charge air volume- less back pressure- Plug & Play Scope of delivery:1 intercooler2 aluminum adapters1 mounting material1 parts certificate + installation instructions With parts certificate (for easy registration according to §19 paragraph 3 of the StVZO).

The Wagner Tuning Competition intercooler kit for the VAG 1.8TSI - 2.0TSI engine is suitable for the following vehicles:VW Golf 7+7.5 GTI 2,0 TSI 162-228KW/220-310hp (incl. Facelift- Performance and Clubsport[S], as well as TCR models)VW Golf 7+7.5 R 2.0 TSI 221-228KW/300-310hp (incl. facelift models)VW Arteon 2.0 TSI 140-206KW/190-280hp (7-speed DSG only)VW T-Roc 2.0TSI 4Motion 140KW/190hp (not included in the parts certificate)VW T-Roc R 4Motion 221KW/300hp (not included in the parts certificate)Skoda Superb 3V 2,0TSI 162KW/220hpSkoda Superb 3V 2,0TSI 206KW/280hp With further modifications (see notes under data sheets) on the vehicle, also suitable for:Audi Q2 40TFSI 140KW/190hp* (not included in the parts certificate)Audi SQ2 221KW/300hp (not included in the parts certificate)Audi A3 8V 1,8TSI 132KW/180hp*Audi A3 8V 2,0TSI 140KW/190hp*Audi S3 8V 2.0TSI 221-228KW/300-310hp*Audi TT 8S 2.0TFSI 169KW / 230hp*Audi TTS 8S 2.0TSI 228KW/310hp*Seat Leon 5F Cupra 2,0TSI 195-272KW/265-370hp* (incl. Cupra ST 265-370 & Cupra R)Skoda Octavia 5E 1,8TSI 132KW/180hp*Skoda Octavia 5E RS 2.0TSI 162-180KW/220-245hp**The additional modifications increase the installation time to approx. 5-6 hours. Experience top performance with the Competition intercooler kit for your VW Golf 7 GTI! Get your VW Golf 7 GTI ready for the ultimate performance upgrade with our Competition intercooler kit. We have developed this kit to take your vehicle performance to a whole new level. Our intercooler has impressive mesh dimensions of 640 mm x 410 mm x 65 mm, offering an increased external charge air volume of 17 liters compared to the factory 9 liters. This means more air, more power and impressive acceleration for your Golf 7 GTI. Our specially developed competition high-performance mesh (Tube Fine) ensures optimum airflow to neighboring components such as the water cooler. Despite its size, our intercooler is surprisingly light at just 8.9 kg. The cast aluminium end boxes were created in the CAD system and optimized using CFD simulations to ensure optimal internal airflow. An integrated air duct in the end box ensures an even filling of the competition high-performance mesh. The intercooler inlets and outlets have been enlarged to an impressive Ø 70 mm and our kit includes reinforced silicone hoses to cope with the increased airflow. Compared to the factory intercooler, our intercooler offers significantly less back pressure, resulting in improved performance. All our intercoolers are equipped with an anti-corrosion coating with excellent heat conduction properties. This guarantees long-lasting and optimum cooling performance for a constant increase in performance. Replacing the factory intercooler with our kit is uncomplicated and can be carried out without any problems. Enjoy the benefits without costly modifications. Our products are subject to strict quality control procedures to ensure the highest standards. Prepare to conquer the road with your Golf 7 GTI. Boost your vehicle's performance and acceleration with our Competition intercooler kit and enjoy a top-class driving experience. Give your Golf 7 GTI the performance it deserves. Get ready to dominate the road! Advantages of the Wagner Tuning intercooler:- improved cooling performance- Charge air volume of 17 liters (instead of 8.9 liters OEM)- Inlets and outlets extended to Ø 70 mm- less back pressure- uncomplicated replacement (plug-and-play) Scope of delivery:1 intercooler2 silicone hoses2 hose clamps1 mounting material1 installation instruction1 parts certificate (OPF models excluded) With parts certificate (OPF models excluded) for easy registration according to §19 paragraph 3 of the StVZO.