Aulitzky Exhaust | ECE downpipe 3,54” (90mm) with sports catalyst | fits Hyundai i30 N/ Performance (PD) nonOPF 250/275hp

Facts: - only suitable for N 2.0l Turbo 184kW / N Performance 2.0l Turbo 202kW without gasoline particulate filter - replaces the main catalyst - with 200 cell stainless steel sports catalyst - Euro 6 compatible - with ECE approval* Compatible vehicles:VehicleVehicle typePowerEngine capacityEngineYear of construction Hyundai i30 III (PD)i30 N184kW / 250hp1998cm³G4KH07.17 - Hyundai i30 III (PD)i30 N Performance202kW / 275hp1998cm³G4KH07.17 - Note: Depending on the software version, the check engine light may come on. We recommend a software adjustment in this case. *This downpipe has ECE approval so that it can be used within the scope of the German Road Traffic Licensing Regulations (StVZO) without registration in the vehicle documents.

Facts: - only for N Performance 2.0l Turbo 202kW with petrol particulate filter - replaces the main catalytic converter - with 200 cell stainless steel sports catalytic converter - Euro 6 compatible - with ECE approval* Compatible vehicles:VehicleVehicle typePower outputEngine capacityEngineYear of manufactureHyundai i30 III (PD)i30 N Performance OPF202kW / 275PS1998cm³G4KH07.17 - Note: Depending on the software version, the check engine light may come on. We recommend a software adjustment in this case. *This downpipe has ECE approval so that it can be used within the scope of the StVZO without registration in the vehicle documents.

The Wagner Tuning Competition Gen.2 intercooler kit fits the following models:Hyundai I30 N 184KW/250hp (2017-2020)*Hyundai I30 N Performance 202KW/275hp (2017-2020)*Hyundai I30 N Project C 202KW/275hp (2019-2020)**not suitable for facelift from 05/2021 Prepare to unleash the full potential of your Hyundai i30 N with the innovative Wagner Tuning high-performance intercooler with parts certificate! This cooler has been specifically designed to meet the requirements of your i30 N and offers impressive performance gains. Our intercooler is equipped with a modern competition mesh (Tube Fin) and has impressive dimensions: 580 mm x 150 mm x 135.4 mm + 580 mm x 62 mm x 70 mm (stepped mesh: 14.3 liters). Compared to the standard intercooler, it offers a massive 44.3% larger flow area and an astonishing 101.4% more net volume. Our cast aluminium end boxes have been carefully designed in CAD and optimized using CFD simulations to ensure ideal internal airflow. The result? Excellent cooling properties with minimal back pressure. The newly developed high-performance mesh, supplemented by a specially manufactured air baffle, ensures that neighboring components, such as the water cooler, receive sufficient airflow. Perfect for racing! Our intercoolers are equipped with an anti-corrosion coating that not only protects against environmental influences, but also offers excellent heat conduction properties. This ensures long-lasting and optimum cooling performance for your i30 N. Installation takes place at the original mounting points and is uncomplicated thanks to the plug and play design. You can rely on the quality of our products as they are subject to strict quality control. Enrich your driving experience with the Wagner Tuning high-performance intercooler for the Hyundai i30 N. Feel the power! Advantages of the Wagner Tuning intercooler:- Improved cooling performance- 44.3% larger inflow area- 101.4% more net volume- Minimal back pressure- Plug and Play Inlet and outlet diameter: Ø65mm Mesh OEM intercooler:V = 7.1 LA = 793.60 cm² Mesh Wagner Tuning intercooler:V = 14.3 LA = 1142.6 cm²m = 9.3 kgScope of delivery:1 intercooler2 silicone hoses1 air baffle1 mounting material1 parts certificate + installation instructions With parts certificate (for easy registration according to §19 paragraph 3 of the StVZO).The parts certificate supplied only covers Euro 6b (without OPF) models. 

The Wagner Tuning Competition Gen.2 intercooler kit fits the following model:Hyundai I30 N Performance 206KW/280PS (2021+) Experience the ultimate performance boost for your Hyundai i30 N with the impressive Wagner Tuning high performance intercooler. Specially developed to meet the demanding requirements of the Hyundai i30 N, this intercooler is equipped with a new type of competition mesh (Tube Fin), which impresses with its dimensions of 580 mm x 150 mm x 135.4 mm + 580 mm x 62 mm x 70 mm (stepped mesh: 14.3 litres). With a 44.3 % larger inflow area and 101.4 % larger mesh volume compared to the original intercooler, this high-performance mesh offers unrivalled performance. The high-quality cast aluminium end boxes have been CAD designed and optimised using CFD simulations to ensure ideal internal airflow. The result is outstanding cooling properties with minimal back pressure. In addition, the innovative high-performance mesh enables sufficient airflow to neighbouring components such as the water cooler through the use of a specially manufactured air baffle. This kit is therefore perfect for racing and offers optimum cooling of the supercharged air with a significant increase in performance. With an anti-corrosion coating, which has outstanding heat conduction properties, the Wagner Tuning intercoolers are optimally protected against environmental influences and offer a long-lasting and efficient cooling effect. Installation is effortless at the original mounting points and is easy to carry out thanks to the plug-and-play system. Like all our products, this intercooler is also subject to strict quality control. With an inlet and outlet diameter of Ø65mm, this intercooler enables optimum flow and contributes to an impressive increase in performance for your Hyundai i30 N. Take your vehicle to a new level and experience the full power that this high-performance intercooler offers. Boost your performance and dominate the road like never before. Advantages of the Wagner Tuning intercooler:- improved cooling performance- 44.3% larger flow area- 104.4% more net volume- Minimal back pressure- Inlet and outlet diameter of Ø65mm- Plug & Play OEM intercooler:V = 7.1 LITRESA = 79360 mm² Wagner Tuning intercooler:V = 14.3 LA = 114492 mm²G = 9.3kg Scope of delivery:1 intercooler2 silicone hoses1 air baffle1 mounting material1 installation instruction Attention: Not authorised in the area of the StVZO.

Your Hyundai i30/i30N is missing a data display! We have: The CANchecked MFD28 Gen.2 for the Hyundai i30/i30N (Model GD 2011-2017, Model PD from 2017). Access to all data from the engine:The sensors are queried directly via Can Bus and are displayed on our proven MFD28. The display for the Hyundai i30/N comes with a vehicle-specific cover and fits into the interior like an original part. This means that the ventilation through the slots remains intact. Our display emulates a manufacturer tester so that all detailed values are available. We have optimized the protocol to achieve maximum polling speed. Details:- integrates perfectly into the vehicle interior- Up to 64 sensors can be queried- 10 individually configurable views with our DSS - Display Setup Software- ready-made views for a quick start with our display- simply plug and play via our cable set - plug in, done- 4 additional analog inputs for exhaust gas temperature, oil pressure and more- Best readability - optional anti-reflective film included- Query the sensors like manufacturer diagnostic tools Performance Meter:Measure your acceleration times in our performance widget - 0-100, 100-200, 0-200 Data Jogging:Log all data to the internal SD card. Whether “on-demand” (start at the tap of a finger) or permanently. All data from your last turn is saved. Preset alarms:Preset alerts can be easily activated and customized. For example, receive a large warning message if the exhaust gas temperature is above 900 degrees. 4 additional analog inputs:Additional temperature and/or pressure sensors can be connected for further monitoring options. e.g. exhaust gas temperature or exhaust gas back pressure. An ethanol sensor can be connected to one of the digital inputs. Read out/delete errors:Read out errors from the engine control unit in plain text and also delete them Individual designWhether it's the individual start screen or the selection from a variety of different widgets. Make the display your display! Access to all data from the engine control unit:We supply your display with a ready-made TRI file as standard. All sensors that are queried are defined here. Temperatures:Engine water temperature, oil temperature, intake temperature Pressures:Boost pressure, ambient pressure, fuel pressure High-pressure pump Lambda/mixture:Lambda value target/actual, injection time, short-term lambda adjustment, long-term lambda adjustment Other:RPM, air mass (g/s), vehicle speed, throttle valve angle, total ignition angle, ignition angle per cylinder, terminal 30 voltage, gear If values are missing, they can easily be added. It always depends on the engine whether it supports the values, sometimes not all sensors are available. For which engines and models is the Hyundai i30 N display:The bezel of the display fits all Hyundai i30 (GD) and a bezel for the i30 Facelift (PD) is also available - the respective version for RHD (right-hand drive) is also available. The data may vary between the different engines. If you have any questions, please contact us - please always tell us the exact vehicle type and engine. Read out and delete errors:Swipe down to access the “DTC” (Diagnostic Trouble Codes = fault memory). The display reads the fault memory from the engine. Optionally, you can also delete these directly on the display. Errors for the engine are displayed in plain text so that you can decide for yourself whether you can continue driving. MFD28 Technical data:- Dimensions: 70.3 x 52mm - Hardware: 2.8” TFT screen, touchscreen, MicroSD, MicroUSB- High-quality milled aluminum front frame- Symmetrical display - ideal for rotating it by 90- Views completely freely configurable on the PC with our DSS - Display Setup Software- Up to 64 widgets per display- 64 sensors (Can Bus + internal)- 10 views- 4x analog inputs- Optional external switching flash- Can bus switching- Can Bus protocols: UDS, KWP2000, OBD Supported values:Many customers always ask: “Which values can I query from my control unit”. The answer: “ALL”. Our MFD28 is compatible with ISO 11898-2 and SAE J2284.The control unit manufacturers themselves determine which values are sent via the CAN bus interface. The documentation is important here - possibly even in the form of a DBC file that can be imported directly. You can also access our extensive list of already implemented control units. This can be found in the download area. A total of up to 50 sensors can be queried if the manufacturer supports this.Broadcast data as well as OBD2 queries via Can Bus (11bit/29bit) are implemented. Special protocols such as TP2.0 from VW/Audi and UDS are also available. DSS - Display Setup Software:With our DSS - Display Setup Software, the display can be conveniently configured on the PC. The Can Bus protocol can be customized, you can import DBC files and design the displays with your own widgets.The log viewer downloads log files from the display. These can then be viewed and values can be individually selected and scaled.A built-in Can Bus logger allows you to take a close look at the log. This can be used to reverse-engineer unknown Can Buses.

The carbon front lip in DK style for G8X models provides that certain something and impresses with its sporty look.Parts certificate in preparation Compatible vehicles:BMW 3 (G80) M3 BMW 3 (G80) M3 Competiton BMW 3 (G80) M3 CS BMW 3 Touring (G81) M3 CompetitonBMW 4 (G82) M4 BMW 4 (G82) M4 Competiton BMW 4 (G82) M4 CSL BMW 4 Convertible (G83) M4 Competiton MNote: This is NOT an original BMW product!

Eibach Pro-Kit performance suspension springs for front and rear axle E10-20-040-03-22 The Eibach Pro-Kit lowering springs are the ideal solution for your vehicle, as the kit lowers the centre of gravity, reduces rebound when accelerating, reduces body roll when cornering and dips when braking. As a result, understeer and oversteer no longer occur. Lowering the vehicle with the Pro-Kit springs reduces the standard distance between the tyres and the wheel arch and gives the vehicle a sporty look. In addition, the handling of the vehicle is maximised. The Eibach Pro-Kits are designed by Eibach suspension engineers and test experts to deliver a combination of sporty looks and performance without compromising on safety or ride quality. - Developed and tested for combination with standard and aftermarket dampers- Component of the Eibach Pro system- Top performance handling- Lowers the vehicle's centre of gravity by up to 40 mm (depending on the vehicle)- Spring design for traction and attraction- Progressive suspension characteristics- Performance handling- ABE or parts certificate Note: Only for vehicles without levelling control. Information:- Lowering front axle: approx. 25mm- Lowering rear axle: approx. 25mm- Type of approval: with expert opinion- Suspension: for all standard damping systems- Illustration may differ from the original Compatible vehicles:- Axle load front axle: up to 1185kg- Axle load rear axle: up to 1425kg- EC type approval number: e1*2007/46*1988*..- Only for vehicles without levelling system BMW X3 (F97) M 353kW / 480PS 7909-ACGBMW X3 (F97) M Competition 375kW / 510hp 7909-ACFBMW X4 (F98) M 353kW / 480PS 7909-ACHBMW X4 (F98) M Competition 375kW / 510hp 7909-ACI

The high-quality carbon fibre front canards are a perfect addition to significantly enhance the style of your vehicle. Unlike regular carbon fibre, pre-preg carbon is reinforced to increase strength and durability. It can also be a staggering 70% lighter than other carbon fibre options.Prepreg carbon is far more uniform than other types of carbon, meaning the likelihood of imperfections is drastically reduced. The manufacturing process eliminates unwanted air bubbles and results in a perfectly smooth and high-gloss finish. Details:- 100% pure prepreg carbon fibre construction- OEM-style weave- High gloss finish- Fit guarantee- With parts certificate according to §19.3 Scope of delivery:- 1x set carbon front canards Compatible vehicles: BMW G80 M3 Limousine (2021+) BMW G80 M3 Competition Limousine (2021+) BMW G81 M3 Touring (2023+) BMW G81 M3 Competition Touring (2023+) BMW G82 M4 Coupe (2021+) BMW G82 M4 Competition Coupé (2021+) BMW G83 M4 Cabrio (2021+) BMW G83 M4 Competition Cabrio (2021+)  Note: This is NOT an original BMW product!

Attention: Only compatible with vehicles with a production date from 01.12.2020!To check compatibility, we need the chassis number of the vehicle. Facts: - replaces the main catalyst - with 200 cell HJS stainless steel sports catalyst - Euro 6 compatible - for current OPF models - with Thermo-Integral insulation (at extra cost) - with ECE approval Compatible vehicles:VehicleVehicle typePower Engine capacityEngineYear of constructionBMW X3 (F97)M353kW / 480hp2993cm³S58 B30 A12.20 - Note: Depending on the software version, the engine control light may light up. We recommend the purchase of an OFF set module or software customisation.

KW V4 coilover suspension incl. support bearings - State of the Art With the new KW V4 with its coilover struts made of stainless steel or aluminum, you give your super sports car the necessary reserves to further increase the driving dynamics. The three-way adjustable high-performance dampers with their independent adjustment of the rebound as well as low-speed and high-speed compression damping are based on the successful racing technology of the multiple overall winner of the ADAC Zurich 24h Race Nürburgring and, depending on the vehicle-specific version, have aluminum support bearings. The new KW V4 is developed exclusively for selected high-performance vehicles, which can be moved more safely at the limits of driving dynamics thanks to our KW suspension technology. - 3-way adjustable high-performance dampers with stainless steel coilover struts - Separate and independent damper adjustment in: - Rebound damping with 16 exact clicks + (firmer) / - (more comfortable) - Low-speed compression damping with 6 exact clicks + (firmer) / - (more comfortable) - High-speed compression damping with 14 exact clicks + (firmer) / - (more comfortable) - Two basic settings ex works with comfort setting and performance setting - Depending on the vehicle, aluminum support bearings are an integral part of the scope of delivery Please note the conditions and instructions for this product: - VA + HA height-adjustable (VA coilover struts, HA springs with height adjustment + dampers) - Dampers have easy-to-use adjustment wheels. Due to the design, the rebound stage can only be adjusted if the piston rod is accessible. - Electronic damper control must be deactivated. Electronic kit for deactivation is included in the scope of delivery. Technical information: Lowering VA/HA (mm): 20-35/15-30 Version: V4 Force adjustment: Rebound and compression damping Material: Stainless steel Adjustment VA/HA: thread/thread Approval: Parts certificate (§19.3) Compatible vehicles: BMW 3 Series (G20, G80) G3L 11/2018- M3 COMPETITION M XDRIVE notchback petrol 375 KW 2993 ccm 6 all-wheel drive BMW 4 Series Coupe (G22, G82) 07/2020- M4 Competition M xDrive Coupe Petrol 375 KW 2993 ccm 6 all-wheel drive