The Eventuri Carbon Side Panel for Honda Civic FK2 Type R is made entirely of carbon fiber and is sure to attract envious glances when you look under the hood. Especially in combination with the intake system and the engine cover, the side panel makes the engine compartment of the Civic shine in new splendor. The engine cover is not included in the scope of delivery, but can be ordered separately.
Facts:Brand: EventuriMaterial: CarbonInstallation: like original part (exchange)Parts certificate: For this product a certificate is available for certain regions and vehicles (details below)
The intake system for the Honda Civic Type-R FK8 was a new kind of challenge for the aircraft engineers at Eventuri, requiring a lot of ingenuity and technical know-how. The problem was the position of the OEM airbox, which sits directly in front of the radiator fan in the FK8. This arrangement poses a challenge for Eventuri's open filter system - how do you ensure that the intake system does not draw hot air out of the engine compartment?The solution is a completely new type of carbon scoop that draws the fresh airflow from the direction of the fenders. The opening, which is twice as large as the original airbox, is no longer in the airflow of the radiator fan and thus ensures cool and even ventilation.
The well-known effect of the Eventuri intake systems then also takes effect in the Honda Civic Type-R FK8:The airflow is accelerated via the cone inside the filter housing. The bundled and directed air then reaches the turbo at lower temperatures and more evenly due to less friction in the air supply. This not only significantly improves responsiveness, but also increases performance.
The Eventuri Honda Civic Type-R FK8 intake comes with the following parts:- Patented Eventuri filter- Full carbon prepreg airbox- Full carbon intake manifold- Secondary intake scoop- Carbon cover
Parts certificateThe manufacturer's specifications apply for installation. An existing certificate is no guarantee that the product can also be installed in the corresponding vehicle.
A certificate is available for this product for the following regions and vehicles:* DE/AT: Vehicle registration document, field K --- CH/LI: Vehicle registration document, field 24Country Model Type approval*DE/AT Honda Civic 5DR FC e11*2007/46*3633*..DE/AT Honda Civic 5DR FK e6*2007/46*0256*..CH/LI Civic 2.0i TypeR 1HA511CH/LI Civic 2.0i TypeR 1HA564CH/LI Civic 2.0i TypeR 1HA580CH/LI Honda Civic 1HA493
Compatible vehicles:VehicleVehicle typePowerEngine capacityEngine typeYear of construction Honda Civic (FK8)Type-R235kW / 320hp1996cm³K20C106.17 - 12.22
Facts:Power increase: 24-30 hp, 28-35 ft-lbBrand: EventuriMaterial: CarbonParts certificate: A certificate is available for this product for certain regions and vehicles (details below)
The FK2 Type R V2 intake is an updated version of our original FK2 system that now replaces the stock rubber intake tube with our carbon tube and a custom silicone hose. The new carbon tube also includes the MAF sensor and therefore also replaces our original MAF metal tube from the original Eventuri system. The addition of the carbon tube smooths the path from the venturi filter housing to the stock turbo inlet tube and the difference is significant in terms of additional power gained. The rest of the intake remains the same, with our cold air scoop and venturi filter housing ensuring smooth airflow and low intake temperatures. By incorporating an effective cold air intake, which the stock system lacks, and coupling it with our patented venturi housing and carbon intake tube, our intake delivers industry-leading results consistently.
The Eventuri differenceThe FK2 Type R V2 Eventuri system uses our patented carbon fiber housing with our custom Gen 2 filter that provides an aerodynamically efficient airflow path from the filter to the turbos. Not just another cone filter with a heat shield, but a unique design that creates the Venturi effect and maintains laminar flow conditions to reduce drag on the turbo.
Each component has been designed for a specific purpose and to a very high standard.
Each Eventuri FK2 V2 kit consists of:Patented carbon fiber intake housingAnodized aluminum intake coverTailor-made generation 2 high-flow filterCarbon intake tube with integrated MAF sensor holderCustomized silicone hose with vent outletsCarbon cold air duct with water drainOEM windshield pre-cut for the ductMounting bracket made from laser-cut stainless steelHigh-quality silicone coupling with hose clamps according to OEM specification
Parts certificateThe manufacturer's specifications apply for installation. An existing certificate is no guarantee that the product can also be installed in the corresponding vehicle.
A certificate is available for this product for the following regions and vehicles:* DE/AT: Vehicle registration document, field K --- CH/LI: Vehicle registration document, field 24Country Model Type approval*DE/AT Honda Civic e11*xx/xx*0256*..
Compatible vehicles:VehicleVehicle typePowerEngine capacityEngine typeYear of construction Honda Civic (FK2)Type-R228kW / 310hp1996cm³K20C108.15 - 12.16
Material: Carbon
Manufacturer: Eventuri
Expertise: Parts certificate
The long awaited upgrade for the Eventuri carbon intake system for the Honda Civic FK2 Type-R!
The new addition to the Eventuri portfolio is a 1 to 1 replacement of the OEM LMM pipe with a perfectly crafted full carbon fibre LMM pipe. The improved flow characteristics and the optimised shielding from engine heat thanks to the Prepeg carbon make this small upgrade an improvement, and not just visually.
In road tests, 12 hp more power was measured over and above the additional power already delivered by the Eventuri Intake!
Compatible vehicles:
VehicleTypePower outputDisplacementEngineYear of construction
Honda Civic (FK2)Type-R228kW / 310PS1996ccK20C108.15 - 12.16
The Eventuri carbon engine cover for Honda Civic FK2 Type R, especially in conjunction with the intake system, ensures envious glances when opening the hood.The engine cover is made entirely of carbon fiber and can also be produced in different colored Kevlar structures (red, blue, yellow) on request.The side panel is not included with this engine cover, but can be ordered separately.
Expert opinion: Material certificate
Compatible vehicles:
VehicleVehicle typePowerEngine capacityEngine typeYear of construction
Honda Civic (FK2)Type-R228kW / 310hp1996cm³K20C108.15 - 12.16
Facts:
+30 hp on the Dyno Stage 3 Civic FK2 Type-R
Brand: Eventuri
Material: Carbon fibre
Installation: like original part (exchange)
Expertise: without
By now it is clear that Eventuri is not your next run-of-the-mill company, but has a special goal with extraordinary products. The design of the new turbo tubes for the Civic FK2 and FK8 makes this clear once again.
Small part, big effect:
+30 hp on the Dyno Stage 3 Civic FK8 Type-R
Naturally full carbon fibre
Perfect fit
Both the Eventuri Honda Civic FK2 Type-R Intake and the FK8 Type-R Intake were available in 2 versions. In both cases, the turbo pipe ONLY fits the new variants (V2) of the intakes. This means that for all customers with old (V1) intakes, the LMM pipe upgrade must first be purchased.
Eventuri offers two variants for both pipes (FK2 and FK8): For V1 and V2 customers respectively.
Eventuri Turbo Tube for Honda Civic FK2 Type-R
The turbo tube for the FK8 is available in 2 variants and only fits the Eventuri Intake.
Variant 1: Customers with the old V1 Intake (old carbon LMM tube)
Scope of delivery:
- Carbon Turbo Tube
- CNC turbo flanges
- FK2 specific silicone tube
- FK2 V2 carbon LMM tube
Variant 2: Customers with the new V2 Intake (with new carbon LMM tube)
Scope of delivery:
- Carbon Turbo Tube
- CNC turbo flanges
- FK2 specific silicone tubeCompatible vehicles:
VehicleTypepowerengine capacityEngineYear of construction
Honda Civic (FK2)Type-R228kW / 310PS1996ccK20C108.15 - 12.16
Still looking for the right gift?
How about a gift voucher?
You can never go wrong with that :)
Make someone happy and give them a gift voucher from Aulitzky Tuning worth €1000.
Please note:
- The value of the voucher cannot be redeemed for cash.
- Redeemable on our entire product range.
- The voucher will be sent in paper form and can then be redeemed on site.
- If required, it is possible to convert this voucher into a discount code for the online shop. Please simply contact us for this.
The Competition Intercooler Upgrade Kit is suitable for the following vehicles:Honda Civic Type R FK8 235kW / 320PS (2017-2022)
Get your Honda Civic Type R FK8 ready for a breathtaking driving experience with the innovative Wagner Tuning high-performance intercooler.
This intercooler has been specially developed to meet the demanding requirements of your vehicle and offers impressive performance gains. Our intercooler is equipped with a modern competition mesh (Tube Fin) and has impressive dimensions: 670 mm x 183.4 mm x 125 mm (15.4 litres). Compared to the standard intercooler, it offers a massive 91% larger flow area and an astonishing 140% more mesh volume.
Our cast aluminium end boxes have been carefully designed in CAD and optimised using CFD simulations to ensure ideal internal airflow. A built-in air baffle inside the radiator inlet ensures even filling of the intercooler. The result? Outstanding cooling properties with minimal back pressure. The newly developed competition high-performance mesh, supplemented by a specially manufactured air baffle, ensures that neighbouring components such as the water cooler receive sufficient airflow. Perfect for racing! Our intercoolers are equipped with an anti-corrosion coating that not only protects against environmental influences, but also offers excellent heat conduction properties. This ensures long-lasting and optimum cooling performance for your Civic Type R FK8. Installation is carried out at the original mounting points and is uncomplicated thanks to the design. You can rely on the quality of our products as they are subject to strict quality control.
Advantages of the Wagner Tuning intercooler:- Improved cooling performance- 91% larger inflow area- 140% more net volume- Minimal back pressure- Plug and PlayInlet diameter Ø65mm ; Outlet diameter Ø70mmMesh OEM intercooler:V = 6.4 LITRESA = 640 cm²
Mains Wagner Tuning intercooler:V = 15.4 LA = 1226 cm²
Scope of delivery:1 intercooler1 air baffle2 Silicone hose1 mounting material1 installation instruction1 parts certificate
With parts certificate (for easy registration according to §19 paragraph 3 of the StVZO).
The 3DDesign carbon diffuser for the F87 is made of carbon fiber/carbon fiber and gives the rear of the vehicle a new shine in no time at all. Installation is extremely simple - but the effect is all the greater. The calm design of the diffuser emphasizes the elegance of the otherwise sporty vehicle.
Incl. parts certificate
Compatible vehicles:BMW 2 Coupe (F22, F87) M2 2015-2018BMW 2 Coupe (F22, F87) M2 CS 2019-2021BMW 2 Coupe (F22, F87) M2 Competition 2018-2021