Air filter | fits BMW M2/M3/M4 incl. Competition/CS/CSL (G80/G81/G82/G87) S58 | Aulitzky Tuning

Valve Stem Seals by BlackBoost. Precision-engineered performance upgrade for Engine Double - 12 Cylinder.

Facts: Acceleration time: 60-130mph Reduced by 0.22 seconds Max. Flow rate per airbox at 28? H2O: Standard 620 CFM, Eventuri 736 CFM Material: Carbon Manufacturer: Eventuri Parts certificate: A certificate is available for this product for certain regions and vehicles (details below) The F90 Eventuri intake system has been developed through extensive real-world testing and airflow simulation analyses. Now in the updated V2 design, it features sealed filter housings to maintain a more stable IAT even when stationary. The new covers that seal the housings, in conjunction with our blade and shield combination, provide unrestricted airflow while maintaining low IATs through cold air saturation. Our large front air scoops channel ambient air directly into the intake area, ensuring that the engine does not suffer from heat soak. In addition, our gold-coloured, heat-reflecting shields have integrated flow guides that direct the ambient air from the blades into the filters. We have also managed to increase the cross-sectional area of the inlet pipe by over 30% compared to the standard inlet, as it passes through the openings in the struts. The Eventuri difference The F90 Eventuri system uses our patented carbon fibre housings with our bespoke Gen 2 filters, providing an aerodynamically efficient airflow path from the filter to the turbos. Not just another cone filter with a heat shield, but a unique design that creates the Venturi effect and maintains laminar flow conditions to reduce turbo drag. Internal volume Another important design feature of the inlet housings is the internal volume of the tubes as they pass through the struts. On the F90, the airbox system must pass through an oval opening in the strut brace on each side before reaching the turbo inlets. We have managed to increase the internal size of our inlets at this junction, resulting in more available volume for the turbos and therefore less restriction. The increase in cross-sectional area between the Eventuri and the standard airbox is 31% as follows: Inner cross-sectional area of the intake pipe at the strut brace: Standard airbox pipe = 6487 mm² Eventuri intake pipe = 8497 mm² Each intake system consists of: 2 x carbon fibre venturi housings with integrated pipes 2 x customised high-performance Generation 2 filters 2 x carbon fibre filter covers 2 x aluminium intake covers 2 x carbon fibre air scoops 2 x laser-cut heat shields, lined with gold heat reflective material 2 x laser-cut air ramps integrated into the heat shields High-quality silicone couplings and OEM hose clamps Parts certificate The manufacturer's specifications apply for installation. An existing certificate is no guarantee that the product can also be installed in the corresponding vehicle. A certificate is available for this product for the following regions and vehicles: * DE/AT: Vehicle registration document, field K --- CH/LI: Vehicle licence, field 24 Country Model Type approval* DE/AT BMW M5 e1*2007/46*1828*.. DE/AT BMW M5 Competition e1*2007/46*1828*.. DE/AT BMW M8 e1*2007/46*2019*.. DE/AT BMW M8 Competition e1*2007/46*2019*.. Compatible vehicles:VehicleTypePowerEngine capacityEngine typeYear of construction BMW 5 Series (F90)M5 441kW / 600hp4395cm³S63 B44 B09.17 - BMW 8 Series (F91/F92/F93)M8 441kW / 600hp4395cm³S63 B44 B07.19 -

Facts:Material: CarbonManufacturer: EventuriExpert opinion: without Our complete engine cover set is made from prepreg carbon fiber and has cutouts to expose our intake, which is sold separately. Available in a satin finish to reduce reflections into the interior and also contrast with the glossy intake system underneath. The complete set consists of the main center cover, two side covers and the rear strut cover. Compatible vehicles:VehicleVehicle typePowerEngine capacityEngine type Lamborghini Huracan5.2 LP 580-25.2 LP 610-25.2 LP 610-4426kW / 580hp449kW / 610hp449kW / 610hp5204cm³CSJB, DKBDGFACSJB, DKB Lamborghini HuracanLP 640-2470kW / 640hp5204cm³DGFB Lamborghini Huracan5.2 Performante470kW / 640hp5204cm³DGFB

Facts:Performance increase (standard vehicle): 10-13hp, 12-15NmPerformance increase (tuned vehicle): 15-20hp, 25-30NmMaterial: CarbonManufacturer: EventuriExpert opinion: without The S3 8Y intake manifold is a complete redesign of the standard intake manifold right up to the turbo inlet. Taking inspiration from our RS3 intake, we have made the most of the available space to create an intake that is suitable for all power levels, from standard equipment through to high performance systems with hybrid or full frame turbos. This intake system has been developed to provide the highest possible flow rate while achieving the lowest possible intake temperatures. Each component has been designed to give the turbo a smooth and clear flow path. The restrictive standard intake pipe with a diameter of 73 mm is replaced by an intake pipe with a larger diameter of 94 mm. The filter itself has an outer diameter of 192mm or 7.5? with a filter area of over 110,000mm^2. The patented Venturi housing is designed to provide the largest possible internal volume for the space available in the Golf engine bay and provides laminar flow to the turbo pipe. Finally, the duct seals the filter opening at the windshield, but is not restricted by the stock intake alone. The resulting system can significantly outflow the stock airbox while keeping intake temperatures to a minimum with the sealed design. Dyno testingOur MK8 Golf intake has been independently tested by a renowned tuner in the UK, Regal Autosport. A MK8 Golf R was tested in original condition and with a tuning box. The tests were carried out on the same day, with the standard airbox being tested first and then the Eventuri. No other changes were made to the car. The first graph shows the results with a stock map. As you can see, there is a measurable gain across the rev range of up to 12 hp. This gain is noticeable even in a standard vehicle on the road due to better throttle response and faster acceleration. The tuning box was used for both the stock airbox and the Eventuri intake without any changes being made between tests. With a higher flow requirement, the stock airbox places a greater restriction on the turbo, which is evident by the significant gain achieved with the Eventuri fitted. We now have a power increase of up to 20 hp and 30 Nm across the entire rev range, which is even more noticeable on the road. We expect the gains to be even greater with higher tuning levels. The improvements are due to a combination of reasons:1) The closed system keeps IAT levels low - the Golf's engine bay can heat up very quickly, so an open cone filter leads to an increase in IAT levels and therefore a loss of power.2) The Venturi housing provides a smooth transition from the filter to the intake pipes, both of which are matched to an internal diameter of 94mm. This contributes to a more efficient operation of the turbo.3) The entire system is made of pure pre-impregnated carbon fiber, which provides excellent insulation against heat and has smooth inner surfaces, unlike fiberglass, which has sharp resin lines. Compatible vehicles:VehicleVehicle typePowerEngine capacityEngine type Audi A3 (8Y)S3 quattro228kW / 310hp1984cm³DNFB Audi TT (8S)TTS quattro235kW / 320hp1984cm³DNFD

The Wagner Tuning Competition intercooler kit EVO 2 upgrade kit fits the following models:Porsche 997 Turbo (2006-2008) 3.6L; 353KW / 480hp EVO 2 high-performance intercooler kit: The ultimate performance upgrade for your Porsche 997 Turbo Experience the unbridled power of your Porsche 997 Turbo with our EVO 2 High Performance Intercooler Kit. Here's what this kit has to offer. Our EVO 2 high performance intercoolers (2 x [330mm x 222mm x 145mm] = 21,244cm³) are designed to provide a whopping 77% more charge air volume than the factory intercoolers. This means a significant increase in the performance of your vehicle. Our specially developed competition high performance mesh ensures excellent cooling characteristics. Even under extreme conditions, your engine will maintain the optimum temperature. Despite its impressive performance, our intercooler kit is surprisingly light. Each of the two coolers weighs just 2x 6.7 kg, which helps to reduce weight in addition to increasing performance. CAD-developed free-form end boxes made of cast aluminum ensure the best possible internal air flow and a high pressure resistance of up to 6 bar (tested). Our kit includes a custom-fit carbon air duct which ensures that the intercooler is optimally supplied with fresh air. This is crucial for the maximum performance of your vehicle. The kit includes additional silicone hoses with an enlarged cross-section to optimize the airflow. Our intercoolers are coated with an anti-corrosion coating that not only ensures longevity, but also has excellent heat conduction properties. Our kit comes complete with new carbon air guides, silicone hoses and aluminum adapters. Installation is simple and is done in exchange for the factory intercoolers. This kit is specifically designed for racing and features a 70mm inlet and outlet for maximum performance. Get the most out of your Porsche 997 Turbo with our EVO 2 high performance intercooler kit. Visit our website for more information and to order your kit. Advantages of the Wagner Tuning intercooler:- improved cooling performance- 77% more charge air volume- extended to 70 mm inlet and outlet- Precisely fitting carbon air duct- simple replacement Scope of delivery:2 intercoolers4 carbon air ducts4 silicone hoses4 hose clamps1 mounting materialAttention: Not approved in the area of the StVZO.