Charge Pipe/ Inlet Carbon for V1/V2 Intake | fits Honda Civic Gen.9 Type-R (FK2) 310hp | Eventuri

Facts:Power increase: 24-30 hp, 28-35 ft-lbBrand: EventuriMaterial: CarbonParts certificate: A certificate is available for this product for certain regions and vehicles (details below) The FK2 Type R V2 intake is an updated version of our original FK2 system that now replaces the stock rubber intake tube with our carbon tube and a custom silicone hose. The new carbon tube also includes the MAF sensor and therefore also replaces our original MAF metal tube from the original Eventuri system. The addition of the carbon tube smooths the path from the venturi filter housing to the stock turbo inlet tube and the difference is significant in terms of additional power gained. The rest of the intake remains the same, with our cold air scoop and venturi filter housing ensuring smooth airflow and low intake temperatures. By incorporating an effective cold air intake, which the stock system lacks, and coupling it with our patented venturi housing and carbon intake tube, our intake delivers industry-leading results consistently. The Eventuri differenceThe FK2 Type R V2 Eventuri system uses our patented carbon fiber housing with our custom Gen 2 filter that provides an aerodynamically efficient airflow path from the filter to the turbos. Not just another cone filter with a heat shield, but a unique design that creates the Venturi effect and maintains laminar flow conditions to reduce drag on the turbo. Each component has been designed for a specific purpose and to a very high standard. Each Eventuri FK2 V2 kit consists of:Patented carbon fiber intake housingAnodized aluminum intake coverTailor-made generation 2 high-flow filterCarbon intake tube with integrated MAF sensor holderCustomized silicone hose with vent outletsCarbon cold air duct with water drainOEM windshield pre-cut for the ductMounting bracket made from laser-cut stainless steelHigh-quality silicone coupling with hose clamps according to OEM specification Parts certificateThe manufacturer's specifications apply for installation. An existing certificate is no guarantee that the product can also be installed in the corresponding vehicle. A certificate is available for this product for the following regions and vehicles:* DE/AT: Vehicle registration document, field K --- CH/LI: Vehicle registration document, field 24Country Model Type approval*DE/AT Honda Civic e11*xx/xx*0256*.. Compatible vehicles:VehicleVehicle typePowerEngine capacityEngine typeYear of construction Honda Civic (FK2)Type-R228kW / 310hp1996cm³K20C108.15 - 12.16

The Eventuri Carbon Side Panel for Honda Civic FK2 Type R is made entirely of carbon fiber and is sure to attract envious glances when you look under the hood.Especially in combination with the intake system and the engine cover, the side panel makes the engine compartment of the Civic shine in new splendor.The engine cover is not included in the scope of delivery, but can be ordered separately. Expert opinion: Material certificate Compatible vehicles:VehicleVehicle typePowerEngine capacityEngine typeYear of construction Honda Civic (FK2)Type-R228kW / 310hp1996cm³K20C108.15 - 12.16

Material: Carbon Manufacturer: Eventuri Expertise: Parts certificate The long awaited upgrade for the Eventuri carbon intake system for the Honda Civic FK2 Type-R! The new addition to the Eventuri portfolio is a 1 to 1 replacement of the OEM LMM pipe with a perfectly crafted full carbon fibre LMM pipe. The improved flow characteristics and the optimised shielding from engine heat thanks to the Prepeg carbon make this small upgrade an improvement, and not just visually. In road tests, 12 hp more power was measured over and above the additional power already delivered by the Eventuri Intake! Compatible vehicles: VehicleTypePower outputDisplacementEngineYear of construction Honda Civic (FK2)Type-R228kW / 310PS1996ccK20C108.15 - 12.16

The Eventuri carbon engine cover for Honda Civic FK2 Type R, especially in conjunction with the intake system, ensures envious glances when opening the hood.The engine cover is made entirely of carbon fiber and can also be produced in different colored Kevlar structures (red, blue, yellow) on request.The side panel is not included with this engine cover, but can be ordered separately. Expert opinion: Material certificate Compatible vehicles: VehicleVehicle typePowerEngine capacityEngine typeYear of construction Honda Civic (FK2)Type-R228kW / 310hp1996cm³K20C108.15 - 12.16

Facts: +30 hp on the Dyno Stage 3 Civic FK2 Type-R Brand: Eventuri Material: Carbon fibre Installation: like original part (exchange) Expertise: without By now it is clear that Eventuri is not your next run-of-the-mill company, but has a special goal with extraordinary products. The design of the new turbo tubes for the Civic FK2 and FK8 makes this clear once again. Small part, big effect: +30 hp on the Dyno Stage 3 Civic FK8 Type-R Naturally full carbon fibre Perfect fit Both the Eventuri Honda Civic FK2 Type-R Intake and the FK8 Type-R Intake were available in 2 versions. In both cases, the turbo pipe ONLY fits the new variants (V2) of the intakes. This means that for all customers with old (V1) intakes, the LMM pipe upgrade must first be purchased. Eventuri offers two variants for both pipes (FK2 and FK8): For V1 and V2 customers respectively. Eventuri Turbo Tube for Honda Civic FK2 Type-R The turbo tube for the FK8 is available in 2 variants and only fits the Eventuri Intake. Variant 1: Customers with the old V1 Intake (old carbon LMM tube) Scope of delivery: - Carbon Turbo Tube - CNC turbo flanges - FK2 specific silicone tube - FK2 V2 carbon LMM tube Variant 2: Customers with the new V2 Intake (with new carbon LMM tube) Scope of delivery: - Carbon Turbo Tube - CNC turbo flanges - FK2 specific silicone tubeCompatible vehicles: VehicleTypepowerengine capacityEngineYear of construction Honda Civic (FK2)Type-R228kW / 310PS1996ccK20C108.15 - 12.16

Transform your F97 into a high-performance powerhouse with the BlackBoost cooling air intake system. Experience more power, style and driving dynamics with this premium upgrade. In the world of performance modifications, the airbox is one of the most important engine components you should upgrade. The factory airbox is very restrictive in terms of airflow and filter area. Our cooling air intakes are designed and engineered to overcome these factory restrictions and deliver the maximum airflow with the lowest possible temperatures given the space available. The BlackBoost Cold Air Intakes are designed to be flush with the bonnet of the vehicle and ensure a consistent seal with the rubber seals of the airbox, whilst also ensuring a large surface area to work properly. The BlackBoost twin-flow filters are specifically designed to maximise airflow and surface area. The BlackBoost intake kit is a plug-and-play solution that works perfectly without further customisation and requires no additional software tuning. It also works smoothly in combination with turbo upgrades, downpipes, methanol injections etc. to unleash the necessary airflow and utilise the full capacity of the engine for those aiming for 1000+ WHP figures.Key Features:- Proven power increase from 8 to 30+ hp on production vehicles- Improved responsiveness across the entire rev range- Optimised airflow and increased volume range compared to standard equipment- Increased surface area of the filter elements- Can support airflow for 1000+ WHP configurations- Larger filter element surface area compared to OEM- Plug-and-play bolt-on installation- No ECU tuning required Compatible vehicles:BMW X3M (F97) 353kW | 480HP | 2993cm³ | S58BMW X3M (F97) Competition | 375kW | 510HP | 2993cm³ | S58 Attention: The intake can only be used in combination with the approved 670hp Stage and must be installed in an open configuration! The intake itself is not approved. Only with in-house installation!

A high-end kit for a high-end car. The new F90 gets a new, innovative look. The new AERO body kit from 3DDesign for the F90 fits seamlessly into the familiar, discreetly aggressive race style of the 3DDesign lines. The iconic design is complemented by a perfect fit and the usual uncompromising quality. The real eye-catcher and centerpiece of the body kit - an carbon diffuser that is uncompromisingly and aggressively designed as a direct replacement part. The clear lines and curved shape fit perfectly into the image of the F90. Three inner fins not only ensure a racy look, but also optimum airflow. The F90 M5 carbon diffuser comes in two parts and can also be purchased separately. A performance diffuser for the F90, which is also a real visual upgrade! Pure luxury! Compatible vehicles:BMW 5 (G30, F90) M5 2017-2023BMW 5 (G30, F90) M5 Competition 2018-2023

Facts: 15mm larger intake diameter +30hp on the Dyno Stage 3 Civic FK8 Type-R Brand: Eventuri Material: Carbon fibre Installation: like original part (exchange) Parts certificate: A certificate is available for this product for certain regions and vehicles (details below) By now it is clear that Eventuri is not your next run-of-the-mill company, but has a specific goal with exceptional products. The design of the new turbo tubes for the Civic FK2 and FK8 makes this clear once again. Small part, big effect: 15mm larger inlet diameter +30 hp on the Dyno Stage 3 Civic FK8 Type-R Naturally full carbon fibre Perfect fit Parts certificate Both the Eventuri Honda Civic FK2 Type-R Intake and the FK8 Type-R Intake were available in 2 versions. In both cases, the turbo pipe ONLY fits the new variants (V2) of the intakes. This means that for all customers with old (V1) intakes, the LMM pipe upgrade must first be purchased. Eventuri offers two variants for both pipes (FK2 and FK8): Each for V1 and V2 customers. Eventuri Turbo Tube for Honda Civic FK8 Type-R The turbo tube for the FK8 is available in 2 variants and only fits the Eventuri Intake. Variant 1: Customers with the old V1 Intake (old carbon LMM tube) Scope of delivery: - Carbon Turbo Tube - CNC turbo flanges - FK8 specific silicone tube - FK8 V2 carbon LMM tube Variant 2: Customers with the new V2 Intake (with new carbon LMM tube) Scope of delivery: - Carbon Turbo Tube - CNC turbo flanges - FK8 specific silicone pipe Parts certificate The manufacturer's specifications apply for installation. An existing certificate is no guarantee that the product can also be installed in the corresponding vehicle. A certificate is available for this product for the following regions and vehicles: * DE/AT: Vehicle registration document, field K --- CH/LI: Vehicle licence, field 24 Country Model Type approval* DE/AT Honda Civic 5DR FC e11*2007/46*3633*.. DE/AT Honda Civic 5DR FK e6*2007/46*0256*.. Compatible vehicles: VehicleVehicle typePowerEngine capacityEngine typeYear of construction Honda Civic (FK8)Type-R235kW / 320hp1996cm³K20C106.17 - 12.22

Facts: +30 hp on the Dyno Stage 3 Civic FK2 Type-R Brand: Eventuri Material: Carbon fibre Installation: like original part (exchange) Expertise: without By now it is clear that Eventuri is not your next run-of-the-mill company, but has a special goal with extraordinary products. The design of the new turbo tubes for the Civic FK2 and FK8 makes this clear once again. Small part, big effect: +30 hp on the Dyno Stage 3 Civic FK8 Type-R Naturally full carbon fibre Perfect fit Both the Eventuri Honda Civic FK2 Type-R Intake and the FK8 Type-R Intake were available in 2 versions. In both cases, the turbo pipe ONLY fits the new variants (V2) of the intakes. This means that for all customers with old (V1) intakes, the LMM pipe upgrade must first be purchased. Eventuri offers two variants for both pipes (FK2 and FK8): For V1 and V2 customers respectively. Eventuri Turbo Tube for Honda Civic FK2 Type-R The turbo tube for the FK8 is available in 2 variants and only fits the Eventuri Intake. Variant 1: Customers with the old V1 Intake (old carbon LMM tube) Scope of delivery: - Carbon Turbo Tube - CNC turbo flanges - FK2 specific silicone tube - FK2 V2 carbon LMM tube Variant 2: Customers with the new V2 Intake (with new carbon LMM tube) Scope of delivery: - Carbon Turbo Tube - CNC turbo flanges - FK2 specific silicone tubeCompatible vehicles: VehicleTypepowerengine capacityEngineYear of construction Honda Civic (FK2)Type-R228kW / 310PS1996ccK20C108.15 - 12.16

Our light grey T-shirt with a white crossed-out area at chest height and a red Aulitzky Tuning logo on the front. The tuning lettering is covered by a black band across the chest and sleeves. So you're super stylish on the go and always well dressed. A cool look for every day :) Available in different sizes. Material: 100% organic cotton Washing instructions: 30°C / no tumble dryer