Front spoiler Low-Line Carbon | fits BMW M3 (E92/E93) S65 | Aulitzky Tuning

ST wheel nuts & wheel bolts Wheel bolts & wheel nuts - the right bolts for every wheel spacerWe recommend ST wheel bolts in black or silver for fitting the D1, D2, DZ and DZX systems. The wheel bolts must be selected longer by the thickness of the spacer disc. The type of bolt head and thread must also be taken into account. Important note! The minimum screw-in depth of the wheel bolts must be observed in all cases: - M12x1.25 min. 8.0 turns- M12x1.5 at least 6.5 turns- M12x1.75 at least 6.5 turns- M14x1.25 min. 9.0 turns- M14x1.5 min. 7.5 turns- M15x1.25 min. 10.0 turns- 1/2" min. 8.0 turns Caution:If the wheel bolt is too long, the axle parts may be damaged! Technical information:Item number: 56110100Short description: Wheel bolt M14x1.25x38mm KE60° silver (10 pcs.)Colour: silverApproval: Registration-freeScope of delivery: Set (10 pcs.) in boxDesign: Cone 60°Product: Wheel boltThread: M14x1.25Shaft length: 38mmKey width: 17mmcollar: tapered collarProduct category: Wheel bolts / Rim locksBrand: ST

The ECU covers on the right and left are made of high-quality carbon fibre and give your vehicle that certain something. Details:- Constructed from 100% pure pre-preg carbon fibre- OEM style weave- High-gloss finish- Perfect fit- registration free Scope of delivery:1x set of ECU covers (1x right and 1x left) Compatible vehicles:BMW M5 G90BMW M5 G99Note: This is NOT an original BMW product!

The G90 SOOQOO front spoiler made of Pre-Preg carbon fibre gives your vehicle a distinctly sporty aggressiveness and gives it a lot of presence on the road. Details:- Constructed from 100% pure pre-preg carbon fibre- OEM style weave- High-gloss finish- Perfect fit- registration according to §21 possible Scope of delivery:1x front spoiler in prepreg carbon fibre Compatible vehicles:BMW M5 G90BMW M5 G99Note: This is NOT an original BMW product!

Facts: Power increase: 15-18 hp, 12-16ft-lb Manufacturer: Eventuri Material: Carbon fibre Parts certificate: A certificate is available for this product for certain regions and vehicles (details below) The Mercedes M139 intake manifold for the A45 and CLA45 has been developed to allow the turbo a smoother airflow. By redesigning the system to allow a much more direct path, the turbo is able to generate boost pressure with less drag and therefore reach the target boost pressure earlier in the rev range. This intake system is designed to provide the highest possible flow rate while maintaining the lowest intake temperatures to achieve a net power gain. The de-throttled flow path also allows for a more pronounced spooling of the turbo, adding to the dynamics of the overall driving experience. The Eventuri difference The Mercedes M139 Eventuri system uses our patented carbon fibre housing, which provides an aerodynamically efficient airflow path from the filter to the turbo. It's not another cone filter with a heat shield, but a unique design that creates the Venturi effect and maintains laminar flow conditions to reduce the drag of the turbo. Bench test Our M139 intake has been independently tested by a Mercedes specialised tuner in the UK - MSL Performance. Several runs were carried out with the OEM airbox to get a repeatable result and then again with the Eventuri intake. The tests were carried out back-to-back on the same day. The results show an increase in torque and power across the rev range - not just at peak revs, which is why the car feels more responsive and can accelerate faster through the gears. The Eventuri A45/CLA45 intake system consists of a number of components designed for a specific purpose and manufactured to the highest standards. We use 100% pre-impregnated carbon fibre with no glass fibre, which means we can achieve a smooth internal surface to get a smoother airflow. Below you will find the details of each component and the design philosophy behind it: Each intake system consists of: Patented carbon fibre Venturi filter housing Customised high-flow dry cone filter Carbon fibre inlet duct Laser-cut stainless steel brackets Parts certificate The manufacturer's specifications apply for installation. An existing certificate is no guarantee that the product can also be installed in the corresponding vehicle. A certificate is available for this product for the following regions and vehicles: * DE/AT: Vehicle registration document, field K --- CH/LI: Vehicle licence, field 24 Country Model Type approval* DE/AT Mercedes AMG A 45 e1*2007/46*1829*.. DE/AT Mercedes AMG A 45 S e1*2007/46*1829*.. DE/AT Mercedes AMG CLA 45 e1*2007/46*1912*.. DE/AT Mercedes AMG CLA 45 S e1*2007/46*1912*.. Compatible vehicles:VehicleTypePowerEngine capacityEngine typeYear of construction Mercedes A-Class (W177)A45 AMG 4-matic+285kW / 387hp1991cm³M 139.98007.19 - Mercedes A-Class (W177)A45 S AMG 4-matic+310kW / 421hp1991cm³M 139.98007.19 - Mercedes CLA (C118/X118)CLA45 AMG 4-matic+285kW / 387hp1991cm³M 139.98007.19 - Mercedes CLA (C118/X118)CLA45 S AMG 4-matic+310kW / 421hp1991cm³M 139.98007.19 -

Cold Air Intake System by BlackBoost. Precision-engineered performance upgrade for Mercedes AMG G63 (463A) M177 4.0L V8 BiTurbo Gen-2. Designed and built by BlackBoost Performance Engineering.

Scope of delivery: - Aulitzky tuning crankshaft lock incl. 8 original fastening screws - Fitting instructions Compatible vehicles:VehicleVehicle typePowerEngine capacityEngine typeYear of construction BMW 2er Coupe (F87)M2 Competition302kW / 411hp2979cm³S55 B30 A06.18 - 06.21 BMW 3er (F80)M3317kW / 431hp2979cm³S55 B30 A03.14 - 10.18 BMW 3er (F80)M3 Competition331kW / 450hp2979cm³S55 B30 A03.16 - 10.18 BMW 4er (F82/F83)M4317kW / 431hp2979cm³S55 B30 A03.14 - 07.20 BMW 4er (F82/F83)M4 Competition331kW / 450hp2979cm³S55 B30 A03.16 - 07.20