Delivery time: Availability on request at Aulitzky Tuning*
Optional: Installation on site at Aulitzky Tuning
- Installation and removal of coilover suspension
- Wheel camber correction kit
- Wheel alignment
- Calibration of assistance systems/lights
- Individual suspension tuning according to customer requirements
- Individual test drive and adjustment together with the customer
Product information "KW V1 coilover suspension inox | fits Ford Focus Mk2 (DA) 2.5 ST | 10230023"
KW V1 coilover suspension
Sportiness paired with outstanding looks. With factory pre-configured damping. Our entry-level model for more driving pleasure through an appealing and individually adjustable lowering is the KW V1 coilover suspension in the KW typical "inox-line". Thanks to its high-quality workmanship, the consistent use of stainless steel struts, corrosion-resistant springs and harmonised components, it stands for many years of driving pleasure - and not just for the life of the car.
Stepless lowering The KW V1 enables maximum lowering within the tested adjustment range. This varies depending on the vehicle model and can, for example, be between 30 and 70 millimetres or 50 to 90 millimetres for an individual lowering. Thanks to the dirt-resistant trapezoidal thread and the polyamide threaded ring, the stepless lowering can be varied quickly and easily even years later. Depending on the vehicle, the lowering is carried out either on the wheel-guiding KW stainless steel suspension struts or on the rear axle height adjustment for non-wheel-guiding double-wishbone rear axles.
The benchmark for sporty, dynamic tuning fans With its harmonious basic set-up for sporty driving on the road, the KW V1 convinces the discerning tuning fan. Our development engineers determine a specific damper set-up and spring rate for each vehicle in order to increase your driving pleasure with the optimum balance of sportiness and suitability for everyday use. After all, you are not buying just any coilover suspension, but a KW coilover suspension that has been specially developed and tuned for your vehicle type. As a manufacturer, KW only uses its own resources, high-quality components and the same damper technology as mass-produced manufacturers. With the KW V1, the rolling and rolling movements of the vehicle body are reduced during compression, allowing you to benefit from unadulterated directness and sportier handling when driving.
Our experience for your driving pleasure As a manufacturer of customised suspension solutions for road and racing, we have been the market leader and innovation driver for over 25 years. No matter where in the world, sporty drivers, car manufacturers and tuners rely on our KW coilovers "Made in Germany". Every KW coilover suspension is subjected to extensive load tests during production and is developed and manufactured directly at our company headquarters in Fichtenberg, Swabia, in order to fulfil the high standards of our KW quality management. As a German manufacturer, it is a matter of course for us to provide a multi-year warranty on our KW coilover suspension kits, which exceed OEM quality and cover over 4,600 applications. When installed by one of our KW specialist dealers, this warranty is valid for up to five years.
- Optimally adjusted in advance - sporty and harmonious damping technology - Stainless steel technology "inox-line" - Individually height-adjustable - Tested adjustment range - Ready-to-install complete solution - High-quality components for a long service life - Complete documentation for easy handling
Setup - factory pre-configured damping setup The KW V1 has a vehicle-specific, permanently configured damper setup. The spring and the damper are perfectly matched to each other so that you experience an optimum balance of sportiness and suitability for everyday use when driving.
Even with a full payload and maximum axle loads, the dampers always work with a sporty characteristic curve. The KW V1 is particularly interesting for tuning enthusiasts who prioritise the show & shine concept.
Please note the conditions and instructions for this product:
- VA + HA height-adjustable (VA coilover struts, HA springs with height adjustment + damper)
- When used with standard wheel/tyre combinations, additional standard wheel spacers from the accessories may be required
Compatible vehicles:
Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive
FORD FOCUS II (DA_) 07/2004-09/2013 2.5 ST Hatchback Petrol 166 KW 2522 ccm 5 Front-wheel drive
The closed APR carbon intake system increases performance by optimising the air mass flow and at the same time offers perfect filtration.
Facts:- Higher power and more torque- Better throttle response- Improved engine noise- Closed carbon fibre system- All fastening elements included- Pleated filter made from cotton gauze- Directional rotating vanes for correct loading of the filter
The carbon fibre intake system is an attractive high performance upgrade for the 1.8T and 2.0T engines found in various vehicles on the MQB platform. The factory intake design has the foundation for excellent performance, but much of it is sacrificed in an effort to fulfil other design requirements.
With requirements to support only factory power output, low noise levels and long service intervals, there is plenty of room for improvement. Expect more power and torque across the powerband with a more direct and responsive feel when operating the throttle. Engine and turbocharger noise will be improved and, depending on driving style, fuel consumption may even be reduced.
In the endeavour to achieve an ideal pressure ratio (1:1) between inlet and outlet, the intake area has several important features.
Through CFD optimisation and validation on the test bench, the filter housing of the intake section has been shaped into a spiral that uses the inertia of the air entering the system to increase the pressure on the outside of the filter. In this way, an even pressure distribution is achieved over the entire surface of the filter and not just at a few key points, maximising the utilisation of the filter area. Compared to many other common intake styles, the APR intake system allows the use of a small, compact filter with better filter utilisation than systems that are often twice the size.
Unlike conventional open element filters, the APR intake system only draws air from the grille area near the front edge of the bonnet. In this way, air is drawn in from an area of relatively high pressure. As the speed of the vehicle increases, the pressure builds up further and ultimately supports the effectiveness of the intake system. By sealing the intake system, the pressure created by the ram air effect and the spiral shape is not simply lost in the engine compartment. This is in contrast to filters with open elements, which draw in air from a relatively low pressure range in the engine compartment.
The design specifications called for an intake system that would only reproduce the true turbocharger sound of the engine when the air is drawn in through the turbocharger or expelled from the diverter valve when the throttle valve is lifted.
The stiffness of the carbon fibre composite material results in engine intake resonance, allowing occupants to hear a clean and clear intake note without sounding intrusive or cheap.
Compatible vehicles:Audi A3 (8V1, 8VK) 1.8 TFSI CJSA - 180 hpAudi A3 (8V1, 8VK) 1.8 TFSI quattro CJSB - 180 hpAudi A3 (8V1, 8VK) 2.0 TFSI CZPB - 190 hpAudi A3 (8V1, 8VK) 2.0 TFSI quattro CZPB - 190 hpAudi A3 (8V1, 8VK) S3 quattro CJXB - 280 hpAudi A3 (8V1, 8VK) S3 quattro CJXC - 300 hpAudi A3 (8V1, 8VK) S3 quattro CJXF - 286 hpAudi A3 (8V1, 8VK) S3 quattro CJXG - 310 hpAudi A3 (8V1, 8VK) S3 quattro DJHA - 310 hpAudi A3 Cabriolet (8V7, 8VE) 1.8 TFSI CJSA - 180 hpAudi A3 Cabriolet (8V7, 8VE) 1.8 TFSI CJSB - 180 hpAudi A3 Cabriolet (8V7, 8VE) 1.8 TFSI quattro CJSB - 180 hpAudi A3 Cabriolet (8V7, 8VE) 2.0 TFSI CZPB - 190 hpAudi A3 Cabriolet (8V7, 8VE) 2.0 TFSI quattro CZPB - 190 hpAudi A3 Cabriolet (8V7, 8VE) S3 quattro CJXC - 300 hpAudi A3 Cabriolet (8V7, 8VE) S3 quattro CJXF - 286 hpAudi A3 Cabriolet (8V7, 8VE) S3 quattro DJHA - 310 hpAudi A3 Cabriolet (8V7, 8VE) S3 quattro DNUE - 300 hpAudi A3 Saloon (8VS, 8VM) 1.8 TFSI CJSA - 180 hpAudi A3 Saloon (8VS, 8VM) 1.8 TFSI CJSB - 180 hpAudi A3 Saloon (8VS, 8VM) 1.8 TFSI quattro CJSB - 180 hpAudi A3 Saloon (8VS, 8VM) 2.0 TFSI CZPB - 190 hpAudi A3 Saloon (8VS, 8VM) S3 quattro CJXB - 280 hpAudi A3 Saloon (8VS, 8VM) S3 quattro CJXC - 300 hpAudi A3 Saloon (8VS, 8VM) S3 quattro CJXF - 286 hpAudi A3 Saloon (8VS, 8VM) S3 quattro CJXG - 310 hpAudi A3 Saloon (8VS, 8VM) S3 quattro DJHA - 310 hpAudi A3 Saloon (8VS, 8VM) S3 quattro DNUE - 300 hpAudi A3 Sportback (8VA, 8VF) 1.8 TFSI CJSA - 180 hpAudi A3 Sportback (8VA, 8VF) 1.8 TFSI CJSB - 180 hpAudi A3 Sportback (8VA, 8VF) 1.8 TFSI quattro CJSB - 180 hpAudi A3 Sportback (8VA, 8VF) 2.0 TFSI CZPB - 190 hpAudi A3 Sportback (8VA, 8VF) 2.0 TFSI quattro CZPB - 190 hpAudi A3 Sportback (8VA, 8VF) S3 quattro CJXB - 280 hpAudi A3 Sportback (8VA, 8VF) S3 quattro CJXC - 300 hpAudi A3 Sportback (8VA, 8VF) S3 quattro CJXF - 286 hpAudi A3 Sportback (8VA, 8VF) S3 quattro CJXG - 310 hpAudi A3 Sportback (8VA, 8VF) S3 quattro DJHA - 310 hpAudi A3 Sportback (8VA, 8VF) S3 quattro DNUE - 300 hpAudi Q2 (GAB, GAG) 2.0 TFSI quattro CZPB - 190 hpAudi Q2 (GAB, GAG) SQ2 TFSI quattro DNUE - 300 hpAudi Q3 (F3B) 40 TFSI quattro DKTC - 190 hpAudi Q3 (F3B) 45 TFSI quattro DKTA - 230 hpAudi Q3 Sportback (F3N) 40 TFSI quattro DKTC - 190 hpAudi Q3 Sportback (F3N) 45 TFSI quattro DKTA - 230 hpAudi TT (FV3, FVP) 1.8 TFSI CJSA - 180 hpAudi TT (FV3, FVP) 1.8 TFSI CJSB - 180 hpAudi TT (FV3, FVP) 2.0 TFSI CHHC - 230 hpAudi TT (FV3, FVP) 2.0 TFSI quattro CHHC - 230 hpAudi TT (FV3, FVP) 2.0 TTS quattro CJXF - 286 hpAudi TT (FV3, FVP) 2.0 TTS quattro CJXG - 310 hpAudi TT (FV3, FVP) 2.0 TTS quattro DNUF - 306 hpAudi TT (FV3, FVP) 45 TFSI DKTB - 245 hpAudi TT (FV3, FVP) 45 TFSI quattro DKTB - 245 hpAudi TT Roadster (FV9, FVR) 1.8 TFSI CJSA - 180 hpAudi TT Roadster (FV9, FVR) 1.8 TFSI CJSB - 180 hpAudi TT Roadster (FV9, FVR) 2.0 TFSI CHHC - 230 hpAudi TT Roadster (FV9, FVR) 2.0 TFSI quattro CHHC - 230 hpAudi TT Roadster (FV9, FVR) 2.0 TTS quattro CJXF - 286 hpAudi TT Roadster (FV9, FVR) 2.0 TTS quattro CJXG - 310 hpAudi TT Roadster (FV9, FVR) 2.0 TTS quattro DNUF - 306 hpAudi TT Roadster (FV9, FVR) 45 TFSI DKTB - 245 hpAudi TT Roadster (FV9, FVR) 45 TFSI quattro DKTB - 245 hpCupra Ateca (KH7, KHP) 2.0 TSI 4Drive DNUE - 300 hpCupra Formentor (KM7) 2.0 TSI 4Drive CZPB - 190 hpSeat Ateca (KH7, KHP) 2.0 TSI 4Drive CZPB - 190 hpSeat Leon (5F1) 1.8 TSI CJSA - 180 PSSeat Leon (5F1) 2.0 Cupra CJXA - 280 hpSeat Leon (5F1) 2.0 Cupra CJXC - 300 hpSeat Leon (5F1) 2.0 Cupra CJXE - 265 hpSeat Leon (5F1) 2.0 Cupra CJXH - 290 hpSeat Leon (5F1) 2.0 Cupra DNUC - 290 hpSeat Leon (5F1) 2.0 Cupra R CJXG - 310 hpSeat Leon SC (5F5) 1.8 TSI CJSA - 180 hpSeat Leon SC (5F5) 2.0 Cupra CJXA - 280 hpSeat Leon SC (5F5) 2.0 Cupra CJXC - 300 hpSeat Leon SC (5F5) 2.0 Cupra CJXE - 265 hpSeat Leon SC (5F5) 2.0 Cupra CJXH - 290 hpSeat Leon ST (5F8) 1.8 TSI CJSA - 180 hpSeat Leon ST (5F8) 2.0 Cupra CJXA - 280 hpSeat Leon ST (5F8) 2.0 Cupra CJXC - 300 hpSeat Leon ST (5F8) 2.0 Cupra CJXE - 265 hpSeat Leon ST (5F8) 2.0 Cupra CJXH - 290 hpSeat Leon ST (5F8) 2.0 Cupra DNUC - 290 hpSeat Leon ST (5F8) 2.0 Cupra 4Drive CJXC - 300 hpSeat Leon ST (5F8) 2.0 Cupra 4Drive DNUE - 300 hpSkoda Octavia III (5E3, NL3, NR3) 1.8 TSI CJSA - 180 hpSkoda Octavia III (5E3, NL3, NR3) 2.0 TSI RS CHHA - 230 hpSkoda Octavia III (5E3, NL3, NR3) 2.0 TSI RS CHHB - 220 hpSkoda Octavia III (5E3, NL3, NR3) 2.0 TSI RS DLBA - 245 hpSkoda Octavia III Combi (5E5, 5E6) 1.8 TSI CJSA - 180 hpSkoda Octavia III Combi (5E5, 5E6) 1.8 TSI CJSB - 180 hpSkoda Octavia III Combi (5E5, 5E6) 2.0 TSI RS CHHA - 230 hpSkoda Octavia III Combi (5E5, 5E6) 2.0 TSI RS CHHB - 220 hpSkoda Octavia III Combi (5E5, 5E6) 2.0 TSI RS DLBA - 245 hpSkoda Superb III (3V3) 2.0 TSI CHHB - 220 hpSkoda Superb III (3V3) 2.0 TSI 4x4 CJXA - 280 hpSkoda Superb III Estate (3V5) 2.0 TSI CHHB - 220 hpSkoda Superb III Estate (3V5) 2.0 TSI 4x4 CJXA - 280 hpVW Arteon (3H7, 3H8) 2.0 TSI CZPB - 190 hpVW Arteon (3H7, 3H8) 2.0 TSI 4motion DJHC - 280 hpVW Arteon (3H7, 3H8) 2.0 TSI 4motion DNUA - 272 hpVW Arteon SHOOTING BRAKE (3H9) 2.0 TSi CZPB - 190 hpVW Arteon SHOOTING BRAKE (3H9) 2.0 TSi 4motion DNUA - 272 hpVW Golf VII (5G1, BQ1, BE1, BE2) 2.0 GTI CHHA - 230 hpVW Golf VII (5G1, BQ1, BE1, BE2) 2.0 GTI CHHB - 220 PSVW Golf VII (5G1, BQ1, BE1, BE2) 2.0 GTI CXDA - 220 hpVW Golf VII (5G1, BQ1, BE1, BE2) 2.0 GTI DKTB - 245 hpVW Golf VII (5G1, BQ1, BE1, BE2) 2.0 GTI DLBA - 245 PSVW Golf VII (5G1, BQ1, BE1, BE2) 2.0 GTI Clubsport CJXE - 265 PSVW Golf VII (5G1, BQ1, BE1, BE2) 2.0 GTI Clubsport S CJXG - 310 PSVW Golf VII (5G1, BQ1, BE1, BE2) 2.0 GTI TCR DNUC - 290 PSVW Golf VII (5G1, BQ1, BE1, BE2) 2.0 R 4motion CJXC - 300 hpVW Golf VII (5G1, BQ1, BE1, BE2) 2.0 R 4motion CJXG - 310 hpVW Golf VII (5G1, BQ1, BE1, BE2) 2.0 R 4motion DJHA - 310 hpVW Golf VII (5G1, BQ1, BE1, BE2) 2.0 R 4motion DNUE - 300 hpVW Golf VII Estate (BA5, BV5) 1.8 TSI 4motion CJSB - 179 hpVW Golf VII Variant (BA5, BV5) 2.0 R 4motion CJXC - 300 hpVW Golf VII Variant (BA5, BV5) 2.0 R 4motion CJXG - 310 hpVW Golf VII Estate (BA5, BV5) 2.0 R 4motion DJHA - 310 hpVW Golf VII Variant (BA5, BV5) 2.0 R 4motion DNUE - 300 hpVW Passat ALLTRACK B8 Variant (3G5, CB5) 2.0 TSI 4motion CHHB - 220 hpVW Passat ALLTRACK B8 Variant (3G5, CB5) 2.0 TSI 4motion CJXA - 280 hpVW Passat B8 (3G2, CB2) 1.8 TSI CJSA - 180 hpVW Passat B8 (3G2, CB2) 1.8 TSI CJSC - 180 hpVW Passat B8 (3G2, CB2) 2.0 TSI CHHB - 220 hpVW Passat B8 (3G2, CB2) 2.0 TSI CXDA - 220 hpVW Passat B8 (3G2, CB2) 2.0 TSI CZPB - 190 hpVW Passat B8 (3G2, CB2) 2.0 TSI 4motion CJXA - 280 hpVW Passat B8 (3G2, CB2) 2.0 TSI 4motion DNUA - 272 hpVW Passat B8 Estate (3G5, CB5) 1.8 TSI CJSA - 180 hpVW Passat B8 Estate (3G5, CB5) 1.8 TSI CJSC - 180 hpVW Passat B8 Estate (3G5, CB5) 2.0 TSI CHHB - 220 hpVW Passat B8 Estate (3G5, CB5) 2.0 TSI CXDA - 220 hpVW Passat B8 Estate (3G5, CB5) 2.0 TSI CZPB - 190 hpVW Passat B8 Estate (3G5, CB5) 2.0 TSI 4motion CJXA - 280 hpVW Passat B8 Estate (3G5, CB5) 2.0 TSI 4motion DNUA - 272 hpVW Tiguan (AD1, AX1) 2.0 TSI 4motion CHHB - 220 hpVW Tiguan (AD1, AX1) 2.0 TSI 4motion CZPA - 180 hpVW Tiguan (AD1, AX1) 2.0 TSI 4motion DKTA - 230 hpVW Tiguan ALLSPACE (BW2, BJ2) 2.0 TSI 4motion CXDA - 220 hpVW Tiguan ALLSPACE (BW2, BJ2) 2.0 TSI 4motion DGVA - 180 hpVW Tiguan ALLSPACE (BW2, BJ2) 2.0 TSI 4motion DNJA - 220 hpVW Touran (5T1) 1.8 TSI CJSA - 180 hpVW T-Roc (A11, D11) 2.0 R 4motion DNUE - 300 hpVW T-Roc (A11, D11) 2.0 TSI 4motion CZPB - 190 hp
Eibach Pro-Kit performance suspension springs for front and rear axle E10-20-041-01-22
The Eibach Pro-Kit lowering springs are the ideal solution for your vehicle, as the kit lowers the centre of gravity, reduces rebound when accelerating, reduces body roll when cornering and dips when braking. As a result, understeer and oversteer no longer occur.
Lowering the vehicle with the Pro-Kit springs reduces the standard distance between the tyres and the wheel arch and gives the vehicle a sporty look. In addition, the handling of the vehicle is maximised.
The Eibach Pro-Kits are designed by Eibach suspension engineers and testing experts to deliver a combination of sporty looks and performance without compromising on safety or ride quality.
- Developed and tested for combination with standard and aftermarket dampers- Component of the Eibach Pro system- Top performance handling- Lowers the vehicle's centre of gravity by up to 40 mm (depending on the vehicle)- Spring design for traction and attraction- Progressive suspension characteristics- Performance handling- ABE or parts certificate
Note: Only for vehicles without levelling control.
Information:- Lowering front axle: approx. 25mm- Lowering rear axle: approx. 20mm- Type of approval: with expert opinion- Illustration may differ from the original
Compatible vehicles:- Axle load front axle: up to 1215kg- Axle load rear axle: up to 1260kg- EC type approval number: e1*2007/46*1688*..- Only for vehicles without levelling system
BMW 5 (F90) M5 441kW / 600PS 7909-ABWBMW 5 (F90) M5 Competition 460kW / 625hp 7909-ABV
The side-mounted Aulitzky Tuning water cooler for the S58 engines of the G8x series was developed to meet the high demands of the engine.
Advantages:
- Specially developed for the S58 3.0L R6 biturbo engine
- Constant maximum performance
- Thermal stabilization
With combination certificate!*
Compatible vehicles:VehicleVehicle typePowerCapacityEngineYear of construction
BMW 2er (G87)M2338kW / 460hp2993cm³S58 B30 A11.22 -
BMW 3 Series (G80)M3353kW / 480hp2993cm³S58 B30 B11.20 -
BMW 3 Series (G80/G81)M3 Competition / xDrive375kW / 510hp390kW / 530hp2993cm³S58 B30 A05.21 -07.24 -
BMW 3 Series (G80)M3 CS xDrive405kW / 551hp2993cm³S58 B30 A03.23 -
BMW 4 Series (G82)M4353kW / 480hp2993cm³S58 B30 B11.20 -
BMW 4 Series (G82/G83)M4 Competition / M xDrive375kW / 510hp2993cm³S58 B30 A11.20 -
BMW 4 Series (G82)M4 CSL xDrive405kW / 551hp412kW / 560hp2993cm³S58 B30 A05.22 - 02.2311.22 - 02.23
*The combination certificate for the pre-facelift and facelift models is available (includes intake manifold, intake, intercooler, boost pipe kit, downpipe, exhaust system, 670hp Aulitzky App performance increase and 107dB increase in stationary noise).
Facts:
- only for N Performance 2.0l Turbo 202kW with petrol particulate filter
- replaces the main catalytic converter
- with 200 cell stainless steel sports catalytic converter
- Euro 6 compatible
- with ECE approval*
Compatible vehicles:VehicleVehicle typePower outputEngine capacityEngineYear of manufactureHyundai i30 III (PD)i30 N Performance OPF202kW / 275PS1998cm³G4KH07.17 -
Note: Depending on the software version, the check engine light may come on. We recommend a software adjustment in this case.
*This downpipe has ECE approval so that it can be used within the scope of the StVZO without registration in the vehicle documents.
KW coilover springs
The spring set with stepless lowering
KW coilover springs are used to lower the vehicle in combination with the standard dampers. In contrast to conventional spring sets, individual height adjustment is possible within the tested adjustment range. This solution uses vehicle-specific spring mounts with matched KW lowering springs and suitable elastomers as well as dust protection systems. The standard damper system, for example with electronic or hydraulic control, remains active.
Setup - sporty and harmonious spring rates
The high-quality chrome-silicon steel springs used by KW coilover springs are matched to the respective standard suspension dampers and wheel loads in their spring rate for each specific vehicle. When developing the respective spring sets, we ensure that the spring rates also harmonise perfectly with the different damper characteristics of your adaptive standard suspension. So even with a KW coilover spring set, you will experience your car more directly and dynamically. KW coilover springs are suitable for car drivers who want to lower their vehicle discreetly and take advantage of an individual adjustment range.
Stepless lowering
Similar to a coilover suspension, the KW coilover springs allow a stepless lowering in a discreet range. This is not possible with conventional lowering springs. The dust protection elements and spring travel limiters included in the scope of delivery are always adapted to the maximum possible lowering. This means that the height-adjustable KW springs can be used to achieve a sporty, harmonious driving behaviour without compromising the driving dynamics of performance-oriented vehicles.
Please note the conditions and instructions for this product:
- VA + HA height-adjustable (spring set consisting of VA+HA springs with height adjustment, can only be used with standard dampers)
Technical information:
Lowering VA/HA (mm): 5-25/15-35
Adjustment HA: Thread
Approval: Parts certificate (§19.3)
Scope of delivery: Set (VA+HA)
Compatible vehicles:
Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive
MERCEDES-BENZ C-KLASSE Cabriolet (A205) 204, 204 AMG 06/2016- AMG C 63 (205.486) Cabriolet Petrol 350 KW 3982 ccm 8 Rear-wheel drive
MERCEDES-BENZ C-KLASSE Cabriolet (A205) 204, 204 AMG 06/2016- AMG C 63 S (205. 487) Cabriolet Petrol 375 KW 3982 ccm 8 Rear-wheel drive
MERCEDES-BENZ C-KLASSE Coupe (C205) 204, 204 AMG 10/2015- AMG C 63 (205.386) Coupe Petrol 350 KW 3982 ccm 8 Rear-wheel drive
MERCEDES-BENZ C-KLASSE Coupe (C205) 204, 204 AMG 10/2015- AMG C 63 S (205.387) Coupe Petrol 375 KW 3982 ccm 8 Rear-wheel drive
The Competition intercooler kit EVO III is suitable for the following vehicles:BMW 335d E90/91/92/93 (2005-2013)* (without ACC)*Adaptations to the vehicle are necessary (see installation instructions). Only suitable for vehicles without ACC unit.
Unleash the full potential of your vehicle with the EVO3 high performance intercooler.
This radiator exceeds all expectations with net dimensions of 510mm x 303mm x 180mm (stepped to 20.65L). Compared to the standard intercooler, it offers an impressive 133% larger flow area and a whopping 183% more charge air volume. Our Competition high performance mesh is a masterpiece of engineering, a Tube Fin mesh with internal turbulators that takes air cooling to a new level. Despite its size, this cooler surprises with a total weight of only 13.2 kg.
The EVO 3 intercooler kit was developed specifically for the extreme requirements of the largest tuning stages. Original click connections are a thing of the past, instead we offer generous connection diameters of Ø70 mm, supported by reinforced silicone hoses. The result? Excellent cooling with minimal back pressure.
All our intercoolers have an anti-corrosion coating that not only prevents corrosion but also offers excellent heat conduction properties. This guarantees a long-lasting and optimum cooling performance with a noticeable increase in power. This kit is completely ready to install and can be easily replaced with your standard intercooler. However, due to its size, some minor adjustments to the radiator support are required. This intercooler has been tested to up to 6 bar and is absolutely pressure stable. You can rely on the quality of our products. Whether on the race track or on the road, the EVO 3 high-performance intercooler is designed for racing and offers the performance and cooling you need.
Advantages of the Wagner Tuning intercooler:- improved cooling performance- 133% larger inflow area- 183% more charge air volume- connection diameter of Ø70 mm- minimal back pressure- Plug and Play
Mains OEM intercooler:V = 7.29 LA = 663 cm²
Mains Wagner Tuning intercooler:V = 20.65 LA = 1545 cm²
Scope of delivery:1 intercooler (black coated)3 silicone hoses1 aluminium adapter (black anodized)1 aluminium charge air pipe (black anodized)1 mounting material1 assembly instructionsAttention: Not approved in the area of the StVZO.
AED 5,590.00*
This website uses cookies to ensure the best experience possible. More information...