Track plate set Plug&Play 22mm/axle 5x112 | fits BMW M3/M4 incl. Competition (G80/G82/G83) | incl. ABE | H&R
AED 1,243.03*
Delivery time: Availability on request at Aulitzky Tuning*
Finanzieren Sie ihren Einkauf über die Targobank.
×
Ratenrechner
Ihre Monatsraten
6 Monate
Kaufpreis:
Monatliche Rate:
Zinsen:
Gesamtbetrag inkl. Zinsen:
Product number:
HRB55664-11
Product information "Track plate set Plug&Play 22mm/axle 5x112 | fits BMW M3/M4 incl. Competition (G80/G82/G83) | incl. ABE | H&R"
H&R Track Plate Set Plug & Play 22mm/axle (11mm per side) for the current G8x models.
In conjunction with the following BMW original tyres:
- 18 inch
- 19 inch
- 20 inch
- 20/21 inch
Compatible vehicles:
- BMW M3 / M3 Competition G80
- BMW M4 / M4 Competition G82/G83
Scope of delivery:
- 4x H&R wheel spacers 11mm (22mm/axle) in black or silver (depending on colour choice)
- Rim locks
- 20x wheel bolts
Fitting instructions:
We recommend balancing the wheel spacers together with the tyres!
Please note:
The illustration shown is an example picture!
The track plates must be registered!
There aren't any asked questions yet.
Actuator for exhaust flap | fits BMW F8X F9X G8X | 18307851568 | Aulitzky Tuning
AED 357.73*
Actuator for exhaust flap
OEM part number: 18307851568 (18 30 7 851 568)
Suitable for the following BMW models with exhaust flap:
F80 F82 F83 F85 F86 F87N F90 F91 F92 F93 F95 F96 F97 F98
G01 G02 G05 G06 G14 G15 G16 G20 G21 G22 G23 G26 G30 G42 G82 G83
Air filter | fits BMW M2/M3/M4 incl. Competition/CS/CSL (G80/G81/G82/G87) S58 | Aulitzky Tuning
AED 541.66*
Here you get a sports air filter with all its advantages:- higher air flow rate- higher filter performance (even smaller particles are filtered)- The particles are trapped in the filter after intake and thus remain trapped until cleaning.- Washable and reusable filter- Increased air flow and therefore better combustion in the engine- No reduction in air flow over a minimum of 50,000 km- Sufficient air even at high engine speeds- more power- Better intake noise- Reduced fuel consumption
These sports air filters have polyurethane as the edge material. Polyurethane is more resistant to petrol, vapours and the like. It has an ideal remoulding. This ensures that the edge of the filter is 100% sealed even when it is reinserted after cleaning.
The edge surface is made from a single mould. With many other makes, pores in the edge material and joining surfaces where the edge is joined together often lead to a crack in the edge, which can result in unclean air being sucked into the engine.
With paper filters, the air flow rate is significantly lower and decreases further after just a short period of use.In addition, paper filters must be disposed of after the specified mileage. TitanTec sports air filters last a lifetime. This is good for the environment and your wallet.Other washable cotton filters only filter much larger particles compared to TitanTec sports air filters.
Cleaning the filters:A TitanTec sports air filter has no oil residue and has 100% of its original performance again after cleaning.Cleaning is quick and easy.We recommend cleaning after 15,000-20,000 kilometres or once a year at the latest.The best time to clean the air filter is around the end of May or beginning of June, i.e. after the pollen count, as this is the time when the air filter is under the most strain.Under no circumstances should aggressive cleaning agents such as petroleum ether, cleaning petrol, brake cleaner etc. be used, as this can damage the material.
Details:
Type: 2x panel filter
Length: 187 mm
Width: 235 mm
Compatible vehicles:
BMW 2 Coupe (G42, G87) M2, 460 hp, 338 kW, from 11/22
BMW 3 (G20, G80, G28) M3, 480 hp, 353 kW, from 11/20
BMW 3 (G20, G80, G28) M3 Competition, 510 hp, 375 kW, from 11/20
BMW 3 (G20, G80, G28) M3 Competition xDrive, 510 hp, 375 kW, from 05/21
BMW 3 (G20, G80, G28) M3 CS xDrive, 551 hp, 405 kW, from 03/23
BMW 3 Touring (G21, G81) M3 Competition xDrive, 510 hp, 375 kW, from 07/22
BMW 4 Coupe (G22, G82) M4, 480 hp, 353 kW, from 11/20
BMW 4 Coupe (G22, G82) M4 Competition, 510 hp, 375 kW, from 11/20
BMW 4 Coupe (G22, G82) M4 Competition M xDrive, 510 hp, 375 kW, from 05/21
BMW 4 Coupe (G22, G82) M4 CSL, 551 hp, 405 kW, 05/22 to 02/23
BMW 4 Convertible (G23, G83) M4 Competition M xDrive, 510 hp, 375 kW, from 07/21
Air inlets Double-Ducts Carbon | fits BMW M3/M4 (G80/G81/G82/G83) | Aulitzky Tuning
AED 4,874.54*
The carbon replacement air intakes Twin Fin for the G8x were developed to match the channel lines of the SP1 G8X front splitter. With both the SP1 and Twin Fin ducts installed, you get the aggressive angles your front end needs.Our covers are a direct replacement, which means you can finally remove the honeycomb grille that is currently in front of the air ducts.These covers are made of pure pre-preg carbon, so the bumper adds minimal weight while providing the aggressive look you've been wanting.
Details:- 100% pure pre-preg carbon fiber construction- OEM style fabric- High gloss finish- Fit guarantee- Mounts to the OEM front bumper using the original grille clip positions- with parts certificate according to §19.3
Compatible vehicles:- BMW G80 M3/Competition/CS Sedan (2021+)- BMW G81 M3 Competition Touring (2021+)- BMW G82 M4/Competition/CSL Coupe (2021+)- BMW G83 M4 Competition Convertible (2021+)Note: This is NOT an original BMW product!
Air inlets Performance Carbon | fits BMW M3/M4 (G80/G81/G82/G83) | Aulitzky Tuning
AED 3,031.68*
The Carbon Performance Twin Fin air intakes for the G8x were developed to give the vehicle a distinctive look. These covers are made of pure pre-preg carbon, so the bumper adds minimal weight while providing the aggressive look you've been wanting.
Details:- 100% pure pre-preg carbon fiber construction- OEM style fabric- High gloss finish- Fit guarantee- with parts certificate according to §19.3
Compatible vehicles:- BMW G80 M3/Competition/CS Sedan (2021+)- BMW G81 M3 Competition Touring (2021+)- BMW G82 M4/Competition/CSL Coupe (2021+)- BMW G83 M4 Competition Convertible (2021+)Note: This is NOT an original BMW product!
Air intake set Carbon | fits BMW M3/M4 incl. Competition/CS/CSL (G80/G81/G82/G83) | Aulitzky Tuning
AED 3,573.70*
The Air Intake Set for the G8X models made of carbon fibre gives your vehicle an upscale look.
When you buy Pre-Preg carbon fibre, you are investing in a higher quality and more durable material that will outlast other forms of carbon fibre and potentially save you money in the long run.
Scope of delivery:- 1x Air Intake Set
Details:- 100% carbon fibre construction- High gloss finish- Fit guarantee
Compatible vehicles with S58 engine:- BMW G80 M3 (all models)- BMW G81 M3 (all models)- BMW G82 M4 (all models)- BMW G83 M4 (all models)
Note: This is NOT an original BMW product!
Armrest Alcantara / Leather | fits BMW M2/M3/M4 (G80/G81/G82/G83/G87) | Aulitzky Tuning
Add a touch of luxury to the interior of your G8X with this custom-made center armrest in high-quality leather or Alcantara.
The red contrast stitching creates a sporty look inspired by motorsport. Fully compatible with the Karbonius center console and easy to install without any modifications.
Features:
- Available in high-quality leather or Alcantara
- Red motorsport-style stitching
- Quick installation – no modifications required
- Exclusive design for a personalized interior
Scope of delivery:
- 1x center armrest
Compatible vehicles:
- BMW G87 M2
- BMW G80 M3
- BMW G81 M3
- BMW G82 M4
- BMW G83 M4
Note: This is NOT an original BMW product!
AED 903.36*
Tip
Aulitzky Exhaust | Cat/OPF replacement pipes | fits BMW M3/M4 incl. Competition/CS/CSL (G80/G81/G82/G83) S58 | Motorsport articles
Facts:
- 2x 3" (76mm)
- Catless
- with connections for differential pressure sensors
- without approval in the area of the StVZO*
The replacement pipes remove the underfloor catalytic converters and the petrol particulate filters.
Only suitable in combination with our Aulitzky Exhaust exhaust system! An adaptation to the original exhaust system will take place in the 2nd quarter of 2025.
Compatible vehicles:VehicleVehicle typePower outputDisplacementEngineYear of construction
BMW 3 Series (G80)M3353kW / 480PS2993cm³S58 B30 B11.20 -
BMW 3 Series (G80/G81)M3 Competition / xDrive375kW / 510PS390kW / 530PS2993cm³S58 B30 A05.21 -07.24 -
BMW 3 Series (G80)M3 CS xDrive405kW / 551PS2993cm³S58 B30 A03.23 -
BMW 4 Series (G82)M4353kW / 480PS2993cm³S58 B30 B11.20 -
BMW 4 Series (G82/G83)M4 Competition / M xDrive375kW / 510PS2993cm³S58 B30 A11.20 -
BMW 4 Series (G82)M4 CSL xDrive405kW / 551hp412kW / 560PS2993cm³S58 B30 A05.22 - 02.2311.22 - 02.23
Please note:
This article is not authorised for use on public roads. Only suitable for racing and export.
For dealers only. No sale to end customers!
From
AED 6,139.24*
%
Tip
Aulitzky Exhaust | Catless Downpipe | fits BMW M2/M3/M4 incl. Competition (G80/G81/G82/G83/G87) S58 | Motorsport articles
AED 5,301.90*
AED 7,223.28*
(26.6% saved)
Facts:
- 2x 3" (76mm)
- catless
- for current OPF models
- with Thermo-Integral insulation
- without approval in the area of the StVZO*
Compatible vehicles:VehicleVehicle typePowerDisplacementEngineYear of construction
BMW 2 Series (G87)M2338kW / 460PS353kW / 480PS2993cm³S58 B30 A11.22 -08.24 -
BMW 3 Series (G80)M3353kW / 480PS2993ccS58 B30 B11.20 -
BMW 3 Series (G80/G81)M3 Competition / xDrive375kW / 510PS390kW / 530PS2993ccS58 B30 A05.21 -07.24 -
BMW 3 Series (G80)M3 CS xDrive405kW / 551PS2993cm³S58 B30 A03.23 -
BMW 4 Series (G82)M4353kW / 480PS2993cm³S58 B30 B11.20 -
BMW 4 Series (G82/G83)M4 Competition / M xDrive375kW / 510PS2993cm³S58 B30 A11.20 -
BMW 4 Series (G82)M4 CSL xDrive405kW / 551hp412kW / 560PS2993cm³S58 B30 A05.22 - 02.2311.22 - 02.23
Please note:
This article is not authorised for use on public roads. Only suitable for racing and export.
For dealers only. No sale to end customers!
Tip
Aulitzky Exhaust | ECE downpipe with sports catalyst | fits BMW M2/M3/M4 incl. Competition/CS/CSL (G80/G81/G82/G83/G87) S58
From
AED 13,366.13*
Facts:
- 2x 3” (76mm), replaces the main catalyst
- with 200 cell stainless steel sports catalyst
- Euro 6 compatible
- for current OPF models
- with Thermo-Integral insulation (for an extra charge)
- with ECE approval*
Compatible vehicles:VehicleVehicle typePowerCapacityEngineYear of construction
BMW 2er (G87)M2338kW / 460hp2993cm³S58 B30 A11.22 -
BMW 3 Series (G80)M3353kW / 480hp2993cm³S58 B30 B11.20 -
BMW 3 Series (G80/G81)M3 Competition / xDrive375kW / 510hp390kW / 530hp2993cm³S58 B30 A05.21 -07.24 -
BMW 3 Series (G80)M3 CS xDrive405kW / 551hp2993cm³S58 B30 A03.23 -
BMW 4 Series (G82)M4353kW / 480hp2993cm³S58 B30 B11.20 -
BMW 4 Series (G82/G83)M4 Competition / M xDrive375kW / 510hp2993cm³S58 B30 A11.20 -
BMW 4 Series (G82)M4 CSL xDrive405kW / 551hp412kW / 560hp2993cm³S58 B30 A05.22 - 02.2311.22 - 02.23
Note: Depending on the software version, the engine control light may light up. We recommend the purchase of an OFF set module or software customisation.
*This downpipe has ECE approval so that it can be used within the scope of the German Road Traffic Licensing Regulations (StVZO) without registration in the vehicle documents.
Tip
Aulitzky Exhaust | ECE exhaust system 3" (76mm) from OPF with flap control | fits BMW M3/M4 incl. Competition/CS/CSL (G80/G81/G82/G83) S58
AED 15,172.86*
Surface:
blasted (glass beads)
Facts:
- Tailpipes: 4x100mm black
- 3.0 inch stainless steel
- MSD removal
- Mounting for the original electric flap actuator
- Made in Germany (Lake Constance)
- with ECE approval*
Scope of delivery:
- 1x Aulitzky Exhaust exhaust system from OPF
- 4x tailpipes 100mm black
- ECE handout
Compatible vehicles:VehicleVehicle typePower outputDisplacementEngineYear of construction
BMW 3 Series (G80)M3353kW / 480PS2993cm³S58 B30 B11.20 -
BMW 3 Series (G80/G81)M3 Competition / xDrive375kW / 510PS390kW / 530PS2993cm³S58 B30 A05.21 -07.24 -
BMW 3 Series (G80)M3 CS xDrive405kW / 551PS2993cm³S58 B30 A03.23 -
BMW 4 Series (G82)M4353kW / 480PS2993cm³S58 B30 B11.20 -
BMW 4 Series (G82/G83)M4 Competition / M xDrive375kW / 510PS2993cm³S58 B30 A11.20 -
BMW 4 Series (G82)M4 CSL xDrive405kW / 551hp2993cm³S58 B30 A05.22
*The ECE and the combination certificate for the pre-facelift and facelift models are available (includes intake, intercooler, boost pipe kit, downpipe, exhaust system, 670hp Aulitzky App performance increase and 107dB increase in stationary noise).
In conjunction with the standard flap control system (with type approval), this flap exhaust system has ECE approval, meaning that it can be used legally within the scope of the German Road Traffic Licensing Regulations (StVZO) without registration in the vehicle documents.
Variants from AED 14,450.17*
Aulitzky Exhaust | OPF-Deleter | fits BMW M3/M4 incl. Competition (G80/G81/G82/G83) S58 | Motorsport articles
AED 1,626.05*
The Aulitzky Exhaust OPF-Deleter module is used to mechanically remove the OPF (gasoline particulate filter) without subsequent software adaptation.It is installed in the engine compartment and can be removed at any time without leaving any residue.
- No error messages from the module
- No detection possible using the manufacturers test device
Notes:An OPF deleter is only there to suppress an error message from the catalytic converter or OPF monitoring. This can appear if, for example, a modified downpipe or an export flap control is installed and the flaps are permanently open as a result.Caution:The OPF must still be installed.However, if the OPF is removed completely, the OPF offset cables are required in addition to the OPF deleter. (These are also available in the online store).After removing the OPF, the complete sensor system including all lines must still be connected to the exhaust system and be tight! Otherwise there will be error messages despite the OPF deleter and offset cable!
Compatible vehicles:VehicleVehicle typePowerEngine capacityEngine typeYear of constructionBMW 3er (G80)M3353kW / 480hp2993cm³S58 B30 B11.20 -BMW 3er (G80/G81)M3 Competition / xDrive375kW / 510hp2993cm³S58 B30 A05.21 -BMW 4er (G82)M4353kW / 480hp2993cm³S58 B30 B11.20 -BMW 4er (G82/G83)M4 Competition / M xDrive375kW / 510hp2993cm³S58 B30 A05.21 -
Note:
This product is NOT approved in the StVZO and is NOT intended for sale within the EU!
This article is intended exclusively for show and motorsport purposes and must not be used/installed on public roads.
If the component is installed on/in the vehicle, the operating license expires!
For dealers only. No sale to end customers!
Aulitzky Exhaust | Race flap control module | fits BMW M3/M4 incl. Competition (G80/G81/G82/G83) S58 | Motorsport articles
AED 1,622.43*
Function:- variable flap control of the original or retrofitted flap exhaust system- controllable via steering wheel buttons
Compatible vehicles:
VehicleTypePowerEngine capacityEngine typeYear of constructionBMW 3er (G80)M3353kW / 480hp2993cm³S58 B30 B11.20 -BMW 3er (G80/G81)M3 Competition / xDrive375kW / 510hp2993cm³S58 B30 A05.21 -BMW 4er (G82)M4353kW / 480hp2993cm³S58 B30 B11.20 -BMW 4er (G82/G83)M4 Competition / M xDrive375kW / 510hp2993cm³S58 B30 A05.21 -
Note:
This product is NOT StVZO approved and NOT intended for sale within the EU!
This item is for show & motorsport purposes only and must not be used/installed on public roads.
If the component is installed on/in the vehicle, the operating license expires!
The pictures shown are examples.
Tip
Aulitzky Tuning | Cooler and intake package | fits BMW M2/M3/M4 incl. Competition/CS/CSL (G80/G81/G82/G83/G87) S58
AED 14,450.17*
The Aulitzky Tuning Cooler and intake package for the S58 engines of the G8x series was developed to meet the high demands of the engine.
With combination certificate!*
Compatible vehicles:VehicleVehicle typePowerCapacityEngineYear of construction
BMW 2er (G87)M2338kW / 460hp2993cm³S58 B30 A11.22 -
BMW 3 Series (G80)M3353kW / 480hp2993cm³S58 B30 B11.20 -
BMW 3 Series (G80/G81)M3 Competition / xDrive375kW / 510hp390kW / 530hp2993cm³S58 B30 A05.21 -07.24 -
BMW 3 Series (G80)M3 CS xDrive405kW / 551hp2993cm³S58 B30 A03.23 -
BMW 4 Series (G82)M4353kW / 480hp2993cm³S58 B30 B11.20 -
BMW 4 Series (G82/G83)M4 Competition / M xDrive375kW / 510hp2993cm³S58 B30 A11.20 -
BMW 4 Series (G82)M4 CSL xDrive405kW / 551hp412kW / 560hp2993cm³S58 B30 A05.22 - 02.2311.22 - 02.23
*The combination certificate for the pre-facelift and facelift models is available (includes intake manifold, intake, intercooler, boost pipe kit, downpipe, exhaust system, 670hp Aulitzky App performance increase and 107dB increase in stationary noise).
Tip
Aulitzky Tuning | Intake manifold | fits BMW M2/M3/M4 incl. Competition/CS/CSL (G80/G81/G82/G83/G87) S58
AED 14,450.17*
The Aulitzky Tuning intake manifold for the S58 engines of the G8x series was developed to meet the high demands of the engine.
Advantages:
- Improved cooling performance with up to 20° cooler intake air temperatures
- Maximum mechanical and thermal relief for the turbocharger
- Increase in power and torque
- Absolute pressure resistance and reliability
- Easy installation thanks to plug-and-play
- 1/8 NPT connections for measuring and monitoring additional parameters
- Optimally suited for all performance levels
With combination certificate!*
Compatible vehicles:VehicleVehicle typePowerCapacityEngineYear of construction
BMW 2er (G87)M2338kW / 460hp2993cm³S58 B30 A11.22 -
BMW 3 Series (G80)M3353kW / 480hp2993cm³S58 B30 B11.20 -
BMW 3 Series (G80/G81)M3 Competition / xDrive375kW / 510hp390kW / 530hp2993cm³S58 B30 A05.21 -07.24 -
BMW 3 Series (G80)M3 CS xDrive405kW / 551hp2993cm³S58 B30 A03.23 -
BMW 4 Series (G82)M4353kW / 480hp2993cm³S58 B30 B11.20 -
BMW 4 Series (G82/G83)M4 Competition / M xDrive375kW / 510hp2993cm³S58 B30 A11.20 -
BMW 4 Series (G82)M4 CSL xDrive405kW / 551hp412kW / 560hp2993cm³S58 B30 A05.22 - 02.2311.22 - 02.23
*The combination certificate for the pre-facelift and facelift models is available (includes intake manifold, intake, intercooler, boost pipe kit, downpipe, exhaust system, 670hp Aulitzky App performance increase and 107dB increase in stationary noise).
Tip
Aulitzky Tuning | Portinjection Rail | fits BMW M2/M3/M4 incl. Competition/CS/CSL (G80/G81/G82/G83/G87) S58
AED 719.08*
The Aulitzky Tuning Portinjection Rail for the S58 engines of the G8x series was developed to meet the high demands of the engine.Compatible vehicles:VehicleVehicle typePowerCapacityEngineYear of construction
BMW 2er (G87)M2338kW / 460hp2993cm³S58 B30 A11.22 -
BMW 3 Series (G80)M3353kW / 480hp2993cm³S58 B30 B11.20 -
BMW 3 Series (G80/G81)M3 Competition / xDrive375kW / 510hp390kW / 530hp2993cm³S58 B30 A05.21 -07.24 -
BMW 3 Series (G80)M3 CS xDrive405kW / 551hp2993cm³S58 B30 A03.23 -
BMW 4 Series (G82)M4353kW / 480hp2993cm³S58 B30 B11.20 -
BMW 4 Series (G82/G83)M4 Competition / M xDrive375kW / 510hp2993cm³S58 B30 A11.20 -
BMW 4 Series (G82)M4 CSL xDrive405kW / 551hp412kW / 560hp2993cm³S58 B30 A05.22 - 02.2311.22 - 02.23
Tip
Aulitzky Tuning | Transmission oil cooler | fits BMW M2/M3/M4 incl. Competition/CS/CSL (G80/G81/G82/G83/G87) S58
AED 2,851.01*
The Aulitzky Tuning transmission oil cooler for the S58 engines of the G8x series was developed to meet the high demands of the engine.
Advantages:
- Specially developed for the S58 3.0L R6 biturbo engine
- Ensures that the oil temperature remains within the optimum range even under extreme conditions
- Particularly suitable for performance-enhanced vehicles
With combination certificate!*
Compatible vehicles:VehicleVehicle typePowerCapacityEngineYear of construction
BMW 2er (G87)M2338kW / 460hp2993cm³S58 B30 A11.22 -
BMW 3 Series (G80)M3353kW / 480hp2993cm³S58 B30 B11.20 -
BMW 3 Series (G80/G81)M3 Competition / xDrive375kW / 510hp390kW / 530hp2993cm³S58 B30 A05.21 -07.24 -
BMW 3 Series (G80)M3 CS xDrive405kW / 551hp2993cm³S58 B30 A03.23 -
BMW 4 Series (G82)M4353kW / 480hp2993cm³S58 B30 B11.20 -
BMW 4 Series (G82/G83)M4 Competition / M xDrive375kW / 510hp2993cm³S58 B30 A11.20 -
BMW 4 Series (G82)M4 CSL xDrive405kW / 551hp412kW / 560hp2993cm³S58 B30 A05.22 - 02.2311.22 - 02.23
*The combination certificate for the pre-facelift and facelift models is available (includes intake manifold, intake, intercooler, boost pipe kit, downpipe, exhaust system, 670hp Aulitzky App performance increase and 107dB increase in stationary noise).
Tip
Aulitzky Tuning | Water cooler Set side-mounted | fits BMW M2/M3/M4 incl. Competition/CS/CSL (G80/G81/G82/G83/G87) S58
AED 3,429.16*
The side-mounted Aulitzky Tuning water cooler for the S58 engines of the G8x series was developed to meet the high demands of the engine.
Advantages:
- Specially developed for the S58 3.0L R6 biturbo engine
- Constant maximum performance
- Thermal stabilization
With combination certificate!*
Compatible vehicles:VehicleVehicle typePowerCapacityEngineYear of construction
BMW 2er (G87)M2338kW / 460hp2993cm³S58 B30 A11.22 -
BMW 3 Series (G80)M3353kW / 480hp2993cm³S58 B30 B11.20 -
BMW 3 Series (G80/G81)M3 Competition / xDrive375kW / 510hp390kW / 530hp2993cm³S58 B30 A05.21 -07.24 -
BMW 3 Series (G80)M3 CS xDrive405kW / 551hp2993cm³S58 B30 A03.23 -
BMW 4 Series (G82)M4353kW / 480hp2993cm³S58 B30 B11.20 -
BMW 4 Series (G82/G83)M4 Competition / M xDrive375kW / 510hp2993cm³S58 B30 A11.20 -
BMW 4 Series (G82)M4 CSL xDrive405kW / 551hp412kW / 560hp2993cm³S58 B30 A05.22 - 02.2311.22 - 02.23
*The combination certificate for the pre-facelift and facelift models is available (includes intake manifold, intake, intercooler, boost pipe kit, downpipe, exhaust system, 670hp Aulitzky App performance increase and 107dB increase in stationary noise).
Tip
Aulitzky Tuning | Water cooler | fits BMW M2/M3/M4 incl. Competition/CS/CSL (G80/G81/G82/G83/G87) S58
AED 4,187.98*
The Aulitzky Tuning water cooler for the S58 engines of the G8x series was developed to meet the high demands of the engine.
Advantages:
- Specially developed for the S58 3.0L R6 biturbo engine
- 60% increase in cooler volume
- Constant maximum performance
- Thermal stabilization
With combination certificate!*
Compatible vehicles:VehicleVehicle typePowerCapacityEngineYear of construction
BMW 2er (G87)M2338kW / 460hp2993cm³S58 B30 A11.22 -
BMW 3 Series (G80)M3353kW / 480hp2993cm³S58 B30 B11.20 -
BMW 3 Series (G80/G81)M3 Competition / xDrive375kW / 510hp390kW / 530hp2993cm³S58 B30 A05.21 -07.24 -
BMW 3 Series (G80)M3 CS xDrive405kW / 551hp2993cm³S58 B30 A03.23 -
BMW 4 Series (G82)M4353kW / 480hp2993cm³S58 B30 B11.20 -
BMW 4 Series (G82/G83)M4 Competition / M xDrive375kW / 510hp2993cm³S58 B30 A11.20 -
BMW 4 Series (G82)M4 CSL xDrive405kW / 551hp412kW / 560hp2993cm³S58 B30 A05.22 - 02.2311.22 - 02.23
*The combination certificate for the pre-facelift and facelift models is available (includes intake manifold, intake, intercooler, boost pipe kit, downpipe, exhaust system, 670hp Aulitzky App performance increase and 107dB increase in stationary noise).
Boost Pipe Kit | fits BMW M2 (G87) 460hp S58 | Wagner Tuning
AED 2,131.93*
Suitable for:
BMW M2 G87 S58 338kW/460hp 2993cm³
BMW M2 G87 S58 353kW/480hp 2993cm³
BMW M3 G80 S58 353kW/480hp 2993cm³
BMW M3 Competition/xDrive G80/G81 S58 375kW/510hp 2993cm³
BMW M3 Competition xDrive G80/G81 S58 390kW/530hp 2993cm³
BMW M3 CS xDrive G80 S58 405kW/551hp 2993cm³
BMW M4 G82 S58 353kW/480hp 2993cm³
BMW M4 Competition/M xDrive G82/G83 S58 375kW/510hp 2993cm³
BMW M4 CSL xDrive G82 S58 405kW/551hp 2993cm³
BMW M4 CSL xDrive G82 S58 412kW/560PS 2993cm³
Optimise the performance and responsiveness of your G8X with our high-quality Boost Pipe Kit for the S58 engine. Developed using advanced CFD simulations for maximum flow optimisation, this kit offers a premium solution for demanding drivers looking for a performance boost.
Your benefits:Flow optimised: Each Boost Pipe has been carefully designed using CFD simulations to ensure optimal airflow and improved performance.
Highest pressure resistance: The Boost Pipe Kit has undergone rigorous testing and is pressure resistant up to 6 bar to ensure reliable performance even under extreme conditions.
High quality materials: Made from high quality aluminium for maximum durability and performance.
Precise fit: Each Boost Pipe is customised for a perfect fit and easy installation without the need for additional adjustments.
Improved performance: Optimising the airflow not only increases performance but also improves engine response for an exciting riding experience.
Scope of delivery:1x aluminium boost pipe1x parts certificate
Note:Please note that the product image is for illustrative purposes only and the actual product may differ.
With parts certificate (for easy registration according to §19 paragraph 3 of the StVZO).
Canards Performance Carbon | fits BMW M3/M4 (G80/G81/G82/G83) S58 | Aulitzky Tuning
AED 1,803.11*
The high-quality carbon fibre front canards are a perfect addition to significantly enhance the style of your vehicle.
Unlike regular carbon fibre, pre-preg carbon is reinforced to increase strength and durability. It can also be a staggering 70% lighter than other carbon fibre options.Prepreg carbon is far more uniform than other types of carbon, meaning the likelihood of imperfections is drastically reduced. The manufacturing process eliminates unwanted air bubbles and results in a perfectly smooth and high-gloss finish.
Details:- 100% pure prepreg carbon fibre construction- OEM-style weave- High gloss finish- Fit guarantee- With parts certificate according to §19.3
Scope of delivery:- 1x set carbon front canards
Compatible vehicles:
BMW G80 M3 Limousine (2021+)
BMW G80 M3 Competition Limousine (2021+)
BMW G81 M3 Touring (2023+)
BMW G81 M3 Competition Touring (2023+)
BMW G82 M4 Coupe (2021+)
BMW G82 M4 Competition Coupé (2021+)
BMW G83 M4 Cabrio (2021+)
BMW G83 M4 Competition Cabrio (2021+)
Note: This is NOT an original BMW product!
Canards Performance Carbon | fits BMW M3/M4 (G80/G81/G82/G83) S58 | Aulitzky Tuning
AED 1,261.09*
The high-quality carbon fibre front canards are a perfect addition to significantly enhance the style of your vehicle.
Unlike regular carbon fibre, pre-preg carbon is reinforced to increase strength and durability. It can also be a staggering 70% lighter than other carbon fibre options.Prepreg carbon is far more uniform than other types of carbon, meaning the likelihood of imperfections is drastically reduced. The manufacturing process eliminates unwanted air bubbles and results in a perfectly smooth and high-gloss finish.
Details:- 100% pure prepreg carbon fibre construction- OEM-style weave- High gloss finish- Fit guarantee- With parts certificate according to §19.3
Scope of delivery:- 1x Performance carbon canards
Compatible vehicles:
BMW G80 M3 Limousine (2021+)
BMW G80 M3 Competition Limousine (2021+)
BMW G81 M3 Touring (2023+)
BMW G81 M3 Competition Touring (2023+)
BMW G82 M4 Coupe (2021+)
BMW G82 M4 Competition Coupé (2021+)
BMW G83 M4 Cabrio (2021+)
BMW G83 M4 Competition Cabrio (2021+)
Note: This is NOT an original BMW product!
Carbon side diffusers | fits BMW M3 incl. Competition (G80/G81) | Aulitzky Tuning
AED 1,803.11*
Made from state-of-the-art pre-preg carbon fibre, these side diffusers for the rear emphasise the character of your vehicle and make it stand out both on the road and online.
Why do we use pre-preg carbon fibre?Unlike normal carbon fibre, pre-preg carbon is reinforced to increase strength and durability.It can also be a staggering 70% lighter than other carbon fibre options, ideal for weight saving.In terms of quality, pre-preg carbon is far more consistent, meaning that the likelihood of imperfections is drastically reduced.of imperfections is drastically reduced.The manufacturing process eliminates unwanted air bubbles and results in a perfect, smooth, sleekand high-gloss finish that is the ultimate piece to complement your vehicle.
When you buy Pre-Preg, you are investing in a higher quality, more durable part that will outlast other forms ofoutlast other forms of carbon fibre and potentially save you money in the long run.
Details:- 100% pure prepreg carbon fibre construction- OEM style weave- High-gloss finish- with parts certificate according to §19.3
Scope of delivery:1x set of side diffusers
Compatible vehicles:- BMW G80 M3 Sedan (2021+)- BMW G80 M3 Competition Sedan (2021+)- BMW G81 M3 Competition Touring (2021+)Note: This is NOT an original BMW product!
Centre console side cover carbon | fits BMW M2/M3/M4 incl. Competition (G80/G81/G82/G83/G87) | Aulitzky Tuning
AED 719.08*
The side centre consoles give your vehicle an upscale look and feel.
When you buy Pre-Preg carbon fibre, you are investing in a higher quality and more durable material that will outlast other forms of carbon fibre and potentially save you money in the long run.
Details:- 100% carbon fibre construction- High gloss finish- Fit guarantee- registration free
Scope of delivery:1x set of centre console side covers (1x right / 1x left)
Compatible vehicles:- BMW G87 M2 - BMW G80 M3 incl. Competition Saloon (2021+)- BMW G81 M3 incl. Competition Touring (2023+)- BMW G82 M4 incl. Competition Coupé (2021+)- BMW G83 M4 incl. Competition Convertible (2021+)
Note: This is NOT an original BMW product!
Cold Air Intake System | fits BMW M2/M3/M4 incl. Competition/CS/CSL (G80/G81/G82/G87) | Blackboost
AED 8,668.66*
Transform your G8X into a high-performance powerhouse with the BlackBoost cooling air intake system. Experience more power, style and driving dynamics with this premium upgrade.
In the world of performance modifications, the airbox is one of the most important engine components you should upgrade. The factory airbox is very restrictive in terms of airflow and filter area.
Our cooling air intakes are designed and engineered to overcome these factory restrictions and deliver the maximum airflow with the lowest possible temperatures given the space available.
The BlackBoost Cold Air Intakes are designed to be flush with the bonnet of the vehicle and ensure a consistent seal with the rubber seals of the airbox, whilst also ensuring a large surface area to work properly.
The BlackBoost twin-flow filters are specifically designed to maximise airflow and surface area. The BlackBoost intake kit is a plug-and-play solution that works perfectly without further customisation and requires no additional software tuning.
It also works smoothly in combination with turbo upgrades, downpipes, methanol injections etc. to unleash the necessary airflow and utilise the full capacity of the engine for those aiming for 1000+ WHP figures.
Scope of delivery:- Powder coated airbox- Filters- BlackBoost CFD developed filter adapter
Key Features:- Proven power increase from 8 to 30+ hp on production vehicles- Improved responsiveness across the entire rev range- Optimised airflow and increased volume range compared to standard equipment- Increased surface area of the filter elements- Can support airflow for 1000+ WHP configurations- Larger filter element surface area compared to OEM- Plug-and-play bolt-on installation- No ECU tuning required
Compatible vehicles:BMW M2 (G87) 338kW | 460PS | 2993cm³ | S58BMW M2 (G87) 353kW | 480PS | 2993cm³ | S58BMW M3 (G80) 353kW | 480PS | 2993cm³ | S58BMW M3 (G80) Competition 375kW | 510PS | 2993cm³ | S58BMW M3 (G80) Competition 375kW | 510PS | 2993cm³ | S58 | xDriveBMW M3 (G80) Competition 390kW | 530PS | 2993cm³ | S58 | xDriveBMW M3 (G80) CS 405kW | 551PS | 2993cm³ | S58 | xDriveBMW M3 (G81) Competition 375kW | 510PS | 2993cm³ | S58 | xDriveBMW M3 (G81) Competition 390kW | 530PS | 2993cm³ | S58 | xDriveBMW M4 (G82) | 353kW | 480PS | 2993cm³ | S58BMW M4 (G82) Competition | 375kW | 510PS | 2993cm³ | S58BMW M4 (G82) Competition M | 375kW | 510PS | 2993cm³ | S58 | xDriveBMW M4 (G82) CSL | 405kW | 551PS | 2993cm³ | S58 | xDriveBMW M4 (G82) CSL | 412kW | 560PS | 2993cm³ | S58 | xDriveBMW M4 (G83) Competition M | 375kW | 510PS | 2993cm³ | S58 | xDrive
Last seen products
Last seen products
Front lip DK-Style Carbon | fits BMW M3/M4 (G80/G81/G82/G83) | Aulitzky Tuning
AED 5,777.90*
The carbon front lip in DK style for G8X models provides that certain something and impresses with its sporty look.Parts certificate in preparation
Compatible vehicles:BMW 3 (G80) M3
BMW 3 (G80) M3 Competiton
BMW 3 (G80) M3 CS
BMW 3 Touring (G81) M3 CompetitonBMW 4 (G82) M4
BMW 4 (G82) M4 Competiton
BMW 4 (G82) M4 CSL
BMW 4 Convertible (G83) M4 Competiton MNote: This is NOT an original BMW product!
%
Lowering springs Pro-Kit Performance VA+HA 25mm | fits BMW X3M/X4M incl. Competition (F97/F98) S58 | Eibach
AED 1,792.27*
AED 2,132.80*
(15.97% saved)
Eibach Pro-Kit performance suspension springs for front and rear axle E10-20-040-03-22
The Eibach Pro-Kit lowering springs are the ideal solution for your vehicle, as the kit lowers the centre of gravity, reduces rebound when accelerating, reduces body roll when cornering and dips when braking. As a result, understeer and oversteer no longer occur.
Lowering the vehicle with the Pro-Kit springs reduces the standard distance between the tyres and the wheel arch and gives the vehicle a sporty look. In addition, the handling of the vehicle is maximised.
The Eibach Pro-Kits are designed by Eibach suspension engineers and test experts to deliver a combination of sporty looks and performance without compromising on safety or ride quality.
- Developed and tested for combination with standard and aftermarket dampers- Component of the Eibach Pro system- Top performance handling- Lowers the vehicle's centre of gravity by up to 40 mm (depending on the vehicle)- Spring design for traction and attraction- Progressive suspension characteristics- Performance handling- ABE or parts certificate
Note: Only for vehicles without levelling control.
Information:- Lowering front axle: approx. 25mm- Lowering rear axle: approx. 25mm- Type of approval: with expert opinion- Suspension: for all standard damping systems- Illustration may differ from the original
Compatible vehicles:- Axle load front axle: up to 1185kg- Axle load rear axle: up to 1425kg- EC type approval number: e1*2007/46*1988*..- Only for vehicles without levelling system
BMW X3 (F97) M 353kW / 480PS 7909-ACGBMW X3 (F97) M Competition 375kW / 510hp 7909-ACFBMW X4 (F98) M 353kW / 480PS 7909-ACHBMW X4 (F98) M Competition 375kW / 510hp 7909-ACI
%
Lowering springs Pro-Kit Performance VA+HA 30mm | fits BMW 3 Series M340i/330i/320d/330d (G21) | Eibach
AED 1,257.48*
AED 1,496.40*
(15.97% saved)
Eibach Pro-Kit performance suspension springs for front and rear axle E10-20-045-05-22
The Eibach Pro-Kit lowering springs are the ideal solution for your vehicle, as the kit lowers the centre of gravity, reduces rebound when accelerating, reduces body roll when cornering and dips when braking. As a result, understeer and oversteer no longer occur.
Lowering the vehicle with the Pro-Kit springs reduces the standard distance between the tyres and the wheel arch and gives the vehicle a sporty look. In addition, the handling of the vehicle is maximised.
The Eibach Pro-Kits are designed by Eibach suspension engineers and test experts to deliver a combination of sporty looks and performance without compromising on safety or ride quality.
- Developed and tested for combination with standard and aftermarket dampers- Component of the Eibach Pro system- Top performance handling- Lowers the vehicle's centre of gravity by up to 40 mm (depending on the vehicle)- Spring design for traction and attraction- Progressive suspension characteristics- Performance handling- ABE or parts certificate
Note: Only for vehicles without levelling control.
Information:- Lowering front axle: approx. 30mm- Lowering rear axle: approx. 25mm- Type of approval: with expert opinion- Suspension: for all standard damping systems- Illustration may differ from the original
Compatible vehicles:- Axle load front axle: up to 1120kg- Axle load rear axle: up to 1360kg- EC type approval number: e1*2007/46*2017*..- Only for vehicles without levelling system
BMW 3 Series Touring (G21) year of construction 07.19- M340i xDriveM340i Mild-Hybrid xDrive330i xDrive320d xDrive320d Mild Hybrid xDrive330d330d Mild Hybrid
Tip
Aulitzky Exhaust | ECE downpipe with sports catalyst | fits BMW X3M (F97) (from BJ 01.12.2020)
From
AED 13,004.79*
Attention: Only compatible with vehicles with a production date from 01.12.2020!To check compatibility, we need the chassis number of the vehicle.
Facts:
- replaces the main catalyst
- with 200 cell HJS stainless steel sports catalyst
- Euro 6 compatible
- for current OPF models
- with Thermo-Integral insulation (at extra cost)
- with ECE approval
Compatible vehicles:VehicleVehicle typePower Engine capacityEngineYear of constructionBMW X3 (F97)M353kW / 480hp2993cm³S58 B30 A12.20 -
Note: Depending on the software version, the engine control light may light up. We recommend the purchase of an OFF set module or software customisation.
Competition intercooler EVO 1 | fits Mercedes-Benz A/B/CLA (W176/C117/W242/W246) | Wagner Tuning
AED 4,119.33*
The Competition intercooler kit fits the following vehicles:Mercedes W 176 A160 1,6L 75KW/102hp (2016-2018)Mercedes W 176 A180 1.6L 90KW/122hp (2012-2018)Mercedes W 176 A200 1.6L 115KW/156hp (2012-2018)Mercedes W 176 A220 2.0L 135KW/184hp (2016-2018)Mercedes W 176 A250 2.0L 155-160KW/211-218hp (2012-2018)Mercedes W 176 A180 CDI 1.8L 80KW/108hp (2012-2014)Mercedes W 176 A200 CDI 1,8L 100KW/136hp (2012-2014)Mercedes W 176 A200 CDI 2,2L 100KW/136hp (2014-2018)Mercedes W 176 A220 CDI 2.2L 125KW/170hp (2012-2018)Mercedes C 117 CLA180 1.6L 90KW/122hp (2013-2019)Mercedes C 117 CLA200 1,6L 115KW/156hp (2013-2019)Mercedes C 117 CLA220 2.0L 135KW/184hp (2016-2019)Mercedes C 117 CLA250 2.0L 155-160KW/211-218hp (2013-2019)Mercedes C 117 CLA220 CDI 2.2L 125KW/170hp (2013-2019)Mercedes W 242 / W 246 B160 1.6L 75KW/102hp (2015-2019)Mercedes W 242 / W 246 B180 1.6L 90KW/122hp (2011-2019)Mercedes W 242 / W 246 B200 1,6L 115KW/156hp (2011-2019)Mercedes W 242 / W 246 B220 2.0L 135KW/184hp (2015-2019)Mercedes W 242 / W 246 B250 2.0L 155KW/211hp (2015-2019)Mercedes W 242 / W 246 B180 CDI 1.8L 80KW/108hp (2011-2014)Mercedes W 242 / W 246 B200 CDI 1.8L 100KW/136hp (2011-2014)Mercedes W 242 / W 246 B200 CDI 2.2L 100KW/136hp (2014-2019)Mercedes W 242 / W 246 B220 CDI 2.2L 125KW/170hp (2011-2019)
Maximize the performance of your vehicle with our Competition high-performance intercooler!
Unleash the true potential of your vehicle and experience the ultimate performance boost.
With impressive mesh dimensions of 640mm x 200mm x 110mm and a remarkable capacity of 14,080cc, our Competition high performance intercooler offers a 25% larger flow area and an astonishing 110% more charge air volume compared to the standard intercooler. Our Competition high performance mesh exceeds all expectations when it comes to cooling performance. Even under extreme conditions, this intercooler keeps a cool head.
Despite its impressive performance, this intercooler is surprisingly light at 10.5 kg. Thanks to our advanced technology and the use of cast aluminium for the free-form end boxes, we have minimized back pressure and maximized performance. Our intercoolers are equipped with an anti-corrosion coating with outstanding heat conduction properties. This guarantees permanent and optimal cooling, which is noticeable in a significant increase in performance. Our kit is completely ready to install, and replacement with the standard intercooler is straightforward - a true plug-and-play experience.
This intercooler was developed to meet the highest demands of racing. With a pressure test of up to 6 bar, it is ready for action-packed racetracks. All our products are subject to strict quality control to ensure they meet the highest standards.
Push your limits and boost your vehicle's performance to a new level. Our Competition high performance intercooler is the best choice for demanding drivers who want more. Ready for the ultimate driving experience? Get our Competition high performance intercooler today and feel the difference!
Advantages of the Wagner Tuning intercooler:- improved cooling performance- 25% larger inflow area- 110% more charge air volume- less back pressure- Plug & Play
Scope of delivery:1 intercooler2 aluminum adapters1 mounting material1 parts certificate + installation instructions
With parts certificate (for easy registration according to §19 paragraph 3 of the StVZO).
Tip
Aulitzky Exhaust | ECE downpipe 3,54” (90mm) with sports catalyst | fits Hyundai i30 N/ Performance (PD) nonOPF 250/275hp
From
AED 7,174.50*
Facts:
- only suitable for N 2.0l Turbo 184kW / N Performance 2.0l Turbo 202kW without gasoline particulate filter
- replaces the main catalyst
- with 200 cell stainless steel sports catalyst
- Euro 6 compatible
- with ECE approval*
Compatible vehicles:VehicleVehicle typePowerEngine capacityEngineYear of construction
Hyundai i30 III (PD)i30 N184kW / 250hp1998cm³G4KH07.17 -
Hyundai i30 III (PD)i30 N Performance202kW / 275hp1998cm³G4KH07.17 -
Note: Depending on the software version, the check engine light may come on. We recommend a software adjustment in this case.
*This downpipe has ECE approval so that it can be used within the scope of the German Road Traffic Licensing Regulations (StVZO) without registration in the vehicle documents.