Free shipping
info@aulitzkytuning.ae
+971 50 660 4009

Wheel bolt 10x M14 x 1.25 x 38 mm KE60° silver | ST Suspensions

AED 81.70*

Delivery time: Availability on request at Aulitzky Tuning*

place a request
Product number: ST56110100
Product information "Wheel bolt 10x M14 x 1.25 x 38 mm KE60° silver | ST Suspensions"

ST wheel nuts & wheel bolts

Wheel bolts & wheel nuts - the right bolts for every wheel spacer
We recommend ST wheel bolts in black or silver for fitting the D1, D2, DZ and DZX systems. The wheel bolts must be selected longer by the thickness of the spacer disc. The type of bolt head and thread must also be taken into account.

Important note! The minimum screw-in depth of the wheel bolts must be observed in all cases:

- M12x1.25 min. 8.0 turns
- M12x1.5 at least 6.5 turns
- M12x1.75 at least 6.5 turns
- M14x1.25 min. 9.0 turns
- M14x1.5 min. 7.5 turns
- M15x1.25 min. 10.0 turns
- 1/2" min. 8.0 turns

Caution:
If the wheel bolt is too long, the axle parts may be damaged!

Technical information:
Item number: 56110100
Short description: Wheel bolt M14x1.25x38mm KE60° silver (10 pcs.)
Colour: silver
Approval: Registration-free
Scope of delivery: Set (10 pcs.) in box
Design: Cone 60°
Product: Wheel bolt
Thread: M14x1.25
Shaft length: 38mm
Key width: 17mm
collar: tapered collar
Product category: Wheel bolts / Rim locks
Brand: ST

Please enter a valid email address.
Please enter a valid question.
Fields marked with * are mandatory.

There aren't any asked questions yet.
Last seen products

Last seen products

Canards SOOQOO Carbon | fits BMW M5 (G90/G99) S68 | Aulitzky Tuning
The SOOQOO front canards made of pre-preg Carbon fiber give your vehicle a distinctly sporty aggressivenessDetails:- Constructed from 100% pure pre-preg carbon fibre- OEM style weave- High-gloss finish- Perfect fit- registration according to §21 possible Scope of delivery:1x front spoiler in prepreg carbon fibre Compatible vehicles:BMW M5 G90BMW M5 G99 TouringNote: This is NOT an original BMW product!

AED 2,145.70*
Connecting rod bearing change | for BMW M3 (E46) 343hp S54
Includes the following services: - Removing and replacing the connecting rod bearings - Check and measure crankshaft journals - Check and adjust the oil pump - Clean all parts - Wheel alignment - Oil & filter change - incl. all parts such as bearings, screws, seals, oil filter and engine oil (10W60) - Entry in the service booklet with BMW registration number stamp - 1 litre oil refill In addition, and depending on requirements, we can also replace the spark plugs and engine mounts for an additional charge. Please note: This service can only be carried out at our company headquarters!

AED 6,837.00*
KW coilover springs | height-adjustable spring kit | fits Audi RS5 quattro B8 | 25310106
KW coilover springs The spring set with stepless lowering KW coilover springs are used to lower the vehicle in combination with the standard dampers. In contrast to conventional spring sets, individual height adjustment is possible within the tested adjustment range. This solution uses vehicle-specific spring mounts with matched KW lowering springs and suitable elastomers as well as dust protection systems. The standard damper system, for example with electronic or hydraulic control, remains active. Setup - sporty and harmonious spring rates The high-quality chrome-silicon steel springs used by KW coilover springs are matched to the respective standard suspension dampers and wheel loads in their spring rate for each specific vehicle. When developing the respective spring sets, we ensure that the spring rates also harmonise perfectly with the different damper characteristics of your adaptive standard suspension. So even with a KW coilover spring set, you will experience your car more directly and dynamically. KW coilover springs are suitable for car drivers who want to lower their vehicle discreetly and take advantage of an individual adjustment range. Stepless lowering Similar to a coilover suspension, the KW coilover springs allow a stepless lowering in a discreet range. This is not possible with conventional lowering springs. The dust protection elements and spring travel limiters included in the scope of delivery are always adapted to the maximum possible lowering. This means that the height-adjustable KW springs can be used to achieve a sporty, harmonious driving behaviour without compromising the driving dynamics of performance-oriented vehicles. Please note the conditions and instructions for this product: - Only for vehicles with electronic damper control - VA + HA height-adjustable (spring set consisting of VA+HA springs with height adjustment, can only be used with standard dampers) Technical information: Lowering VA/HA (mm): 5-25/5-20 Adjustment HA: Thread Approval: Parts certificate (§19.3) Scope of delivery: Set (VA+HA) Compatible vehicles: Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive AUDI A5 (B8) 8T3 06/2007-01/2017 RS5 quattro Coupe Petrol 331 KW 4163 ccm 8 All-wheel drive

AED 3,356.75*
Upgrade Ducts Carbon for intake system | fits Mercedes-Benz C63/S AMG (W205) | Eventuri
Eventuri Carbon Upgrade Ducts for the Mercedes W205 C63(S) intake system To ensure a stable intake tract under high pressure conditions, Eventuri changes the front air ducts from silicone to carbon fibre. Part assembly: Intake system Brand: Eventuri Material: Carbon Installation: as original part (replacement) Expert opinion: Parts certificate Compatible vehicles:VehicleVehicle typePowerEngine capacityEngine typeYear of construction Mercedes C-Class (W205)C63 AMG350kW / 476hp3982cm³M 177.98010.14 - Mercedes C-Class (W205)C63 S AMG375kW / 510hp3982cm³M 177.98010.14 -

AED 1,036.30*