Crankshaft protection | fits BMW M2 Comp./ M3/M4 incl. Competition (F87/F80/F82/F83) S55 | Aulitzky Tuning

AED 769.70*

Delivery time: Immediately available: approx. 1-3 working days*

place a request

Finanzieren Sie ihren Einkauf über die Targobank.

Product number: ATKWSS55

Product information "Crankshaft protection | fits BMW M2 Comp./ M3/M4 incl. Competition (F87/F80/F82/F83) S55 | Aulitzky Tuning"

Scope of delivery:
- Aulitzky tuning crankshaft lock incl. 8 original fastening screws
- Fitting instructions

Compatible vehicles:

Vehicle	Vehicle type	Power	Engine capacity	Engine type	Year of construction
BMW 2er Coupe (F87)	M2 Competition	302kW / 411hp	2979cm³	S55 B30 A	06.18 - 06.21
BMW 3er (F80)	M3	317kW / 431hp	2979cm³	S55 B30 A	03.14 - 10.18
BMW 3er (F80)	M3 Competition	331kW / 450hp	2979cm³	S55 B30 A	03.16 - 10.18
BMW 4er (F82/F83)	M4	317kW / 431hp	2979cm³	S55 B30 A	03.14 - 07.20
BMW 4er (F82/F83)	M4 Competition	331kW / 450hp	2979cm³	S55 B30 A	03.16 - 07.20

Please enter a valid email address.

Your question *

Please enter a valid question.

I agree that my data will be processed to answer the question. I have taken note of the Privacy Policy and agree to the information described therein.*

To continue, enter the characters shown above*

Fields marked with * are mandatory.

There aren't any asked questions yet.

Connecting rod bearing change | for BMW M6 (E63/E64) 507hp S85

Includes the following services:- Remove and replace connecting rod bearings- Check and measure crankshaft journals- Check and adjust oil pump- Clean all parts- Wheel alignment- Change oil and filter- Including all parts such as bearings, screws, seals, oil filter and engine oil (10W60)- Entry with BMW company number stamp in the service booklet- 1 l oil refillIn addition and depending on requirements, we can also replace the spark plugs and engine bearings for an additional charge for the parts. Note:This service can only be carried out at our company headquarters!

AED 11,820.70*

Connecting rod bearing change | for BMW M3 (E46) 343hp S54

Includes the following services: - Removing and replacing the connecting rod bearings - Check and measure crankshaft journals - Check and adjust the oil pump - Clean all parts - Wheel alignment - Oil & filter change - incl. all parts such as bearings, screws, seals, oil filter and engine oil (10W60) - Entry in the service booklet with BMW registration number stamp - 1 litre oil refill In addition, and depending on requirements, we can also replace the spark plugs and engine mounts for an additional charge. Please note: This service can only be carried out at our company headquarters!

AED 6,837.00*

Connecting rod bearing change | for BMW M5 (E60/E61) 507hp S85

AED 11,820.70*

Connecting rod bearing change | for BMW M3 (E90/E92/E93) 420hp S65

Includes the following services:- Removing and replacing the connecting rod bearings- Check and measure crankshaft journals- Check and adjust the oil pump- Clean all parts- Wheel alignment- Oil & filter change- incl. all parts such as bearings, screws, seals, oil filter and engine oil (10W60)- Entry in the service booklet with BMW serial number stamp- 1 liter oil refillIn addition, and depending on requirements, we can also replace the spark plugs and engine mounts for an additional charge. Please note:This service can only be carried out at our company headquarters!

From AED 8,401.81*

Details

Connecting rod bearing change | for BMW M5 (E39) 400hp S62

AED 7,520.70*

Connecting rod bearing change | for BMW Z4M (E85/E86) 343hp S54

AED 5,800.70*

Connecting rod bearing change | for BMW M2/M3/M4 incl. Competition/CS (F80/F82/F83/F87) S55

Includes the following services:- Removing and replacing the connecting rod bearings- Check and measure crankshaft journals- Check and adjust the oil pump- Clean all parts- Wheel alignment- Oil & filter change- incl. all parts such as bearings, screws, seals, oil filter and engine oil (10W60)- Entry in the service booklet with BMW serial number stamp- 1 liter oil refillIn addition, and depending on requirements, we can also replace the spark plugs and engine mounts for an additional charge. Please note:This service can only be carried out at our company headquarters!

From AED 10,745.70*

Details

Last seen products

Wheel bolt 10x M14 x 1.25 x 38 mm KE60° silver | ST Suspensions

ST wheel nuts & wheel bolts Wheel bolts & wheel nuts - the right bolts for every wheel spacerWe recommend ST wheel bolts in black or silver for fitting the D1, D2, DZ and DZX systems. The wheel bolts must be selected longer by the thickness of the spacer disc. The type of bolt head and thread must also be taken into account. Important note! The minimum screw-in depth of the wheel bolts must be observed in all cases: - M12x1.25 min. 8.0 turns- M12x1.5 at least 6.5 turns- M12x1.75 at least 6.5 turns- M14x1.25 min. 9.0 turns- M14x1.5 min. 7.5 turns- M15x1.25 min. 10.0 turns- 1/2" min. 8.0 turns Caution:If the wheel bolt is too long, the axle parts may be damaged! Technical information:Item number: 56110100Short description: Wheel bolt M14x1.25x38mm KE60° silver (10 pcs.)Colour: silverApproval: Registration-freeScope of delivery: Set (10 pcs.) in boxDesign: Cone 60°Product: Wheel boltThread: M14x1.25Shaft length: 38mmKey width: 17mmcollar: tapered collarProduct category: Wheel bolts / Rim locksBrand: ST

AED 81.70*

Front spoiler SOOQOO Carbon | fits BMW M5 (G90/G99) S68 | Aulitzky Tuning

The G90 SOOQOO front spoiler made of Pre-Preg carbon fibre gives your vehicle a distinctly sporty aggressiveness and gives it a lot of presence on the road. Details:- Constructed from 100% pure pre-preg carbon fibre- OEM style weave- High-gloss finish- Perfect fit- registration according to §21 possible Scope of delivery:1x front spoiler in prepreg carbon fibre Compatible vehicles:BMW M5 G90BMW M5 G99Note: This is NOT an original BMW product!

AED 5,585.70*

Canards SOOQOO Carbon | fits BMW M5 (G90/G99) S68 | Aulitzky Tuning

The SOOQOO front canards made of pre-preg Carbon fiber give your vehicle a distinctly sporty aggressivenessDetails:- Constructed from 100% pure pre-preg carbon fibre- OEM style weave- High-gloss finish- Perfect fit- registration according to §21 possible Scope of delivery:1x front spoiler in prepreg carbon fibre Compatible vehicles:BMW M5 G90BMW M5 G99 TouringNote: This is NOT an original BMW product!

AED 2,145.70*

Connecting rod bearing change | for BMW M3 (E46) 343hp S54

AED 6,837.00*

KW coilover springs | height-adjustable spring kit | fits Audi RS5 quattro B8 | 25310106

KW coilover springs The spring set with stepless lowering KW coilover springs are used to lower the vehicle in combination with the standard dampers. In contrast to conventional spring sets, individual height adjustment is possible within the tested adjustment range. This solution uses vehicle-specific spring mounts with matched KW lowering springs and suitable elastomers as well as dust protection systems. The standard damper system, for example with electronic or hydraulic control, remains active. Setup - sporty and harmonious spring rates The high-quality chrome-silicon steel springs used by KW coilover springs are matched to the respective standard suspension dampers and wheel loads in their spring rate for each specific vehicle. When developing the respective spring sets, we ensure that the spring rates also harmonise perfectly with the different damper characteristics of your adaptive standard suspension. So even with a KW coilover spring set, you will experience your car more directly and dynamically. KW coilover springs are suitable for car drivers who want to lower their vehicle discreetly and take advantage of an individual adjustment range. Stepless lowering Similar to a coilover suspension, the KW coilover springs allow a stepless lowering in a discreet range. This is not possible with conventional lowering springs. The dust protection elements and spring travel limiters included in the scope of delivery are always adapted to the maximum possible lowering. This means that the height-adjustable KW springs can be used to achieve a sporty, harmonious driving behaviour without compromising the driving dynamics of performance-oriented vehicles. Please note the conditions and instructions for this product: - Only for vehicles with electronic damper control - VA + HA height-adjustable (spring set consisting of VA+HA springs with height adjustment, can only be used with standard dampers) Technical information: Lowering VA/HA (mm): 5-25/5-20 Adjustment HA: Thread Approval: Parts certificate (§19.3) Scope of delivery: Set (VA+HA) Compatible vehicles: Manufacturer Model Version Body Fuel Performance Displacement Cylinder Drive AUDI A5 (B8) 8T3 06/2007-01/2017 RS5 quattro Coupe Petrol 331 KW 4163 ccm 8 All-wheel drive

AED 3,356.75*

Upgrade Ducts Carbon for intake system | fits Mercedes-Benz C63/S AMG (W205) | Eventuri

Eventuri Carbon Upgrade Ducts for the Mercedes W205 C63(S) intake system To ensure a stable intake tract under high pressure conditions, Eventuri changes the front air ducts from silicone to carbon fibre. Part assembly: Intake system Brand: Eventuri Material: Carbon Installation: as original part (replacement) Expert opinion: Parts certificate Compatible vehicles:VehicleVehicle typePowerEngine capacityEngine typeYear of construction Mercedes C-Class (W205)C63 AMG350kW / 476hp3982cm³M 177.98010.14 - Mercedes C-Class (W205)C63 S AMG375kW / 510hp3982cm³M 177.98010.14 -

AED 1,036.30*

Crankshaft protection | fits BMW M2 Comp./ M3/M4 incl. Competition (F87/F80/F82/F83) S55 | Aulitzky Tuning

Ratenrechner

Ask a question

Previously asked questions