Charge Pipe/ Inlet Carbon for V1/V2 Intake | fits Honda Civic Gen.10 Type-R (FK8) 320hp | Eventuri

Facts:Brand: EventuriMaterial: CarbonInstallation: like original part (exchange)Parts certificate: For this product a certificate is available for certain regions and vehicles (details below) The intake system for the Honda Civic Type-R FK8 was a new kind of challenge for the aircraft engineers at Eventuri, requiring a lot of ingenuity and technical know-how. The problem was the position of the OEM airbox, which sits directly in front of the radiator fan in the FK8. This arrangement poses a challenge for Eventuri's open filter system - how do you ensure that the intake system does not draw hot air out of the engine compartment?The solution is a completely new type of carbon scoop that draws the fresh airflow from the direction of the fenders. The opening, which is twice as large as the original airbox, is no longer in the airflow of the radiator fan and thus ensures cool and even ventilation. The well-known effect of the Eventuri intake systems then also takes effect in the Honda Civic Type-R FK8:The airflow is accelerated via the cone inside the filter housing. The bundled and directed air then reaches the turbo at lower temperatures and more evenly due to less friction in the air supply. This not only significantly improves responsiveness, but also increases performance. The Eventuri Honda Civic Type-R FK8 intake comes with the following parts:- Patented Eventuri filter- Full carbon prepreg airbox- Full carbon intake manifold- Secondary intake scoop- Carbon cover Parts certificateThe manufacturer's specifications apply for installation. An existing certificate is no guarantee that the product can also be installed in the corresponding vehicle. A certificate is available for this product for the following regions and vehicles:* DE/AT: Vehicle registration document, field K --- CH/LI: Vehicle registration document, field 24Country Model Type approval*DE/AT Honda Civic 5DR FC e11*2007/46*3633*..DE/AT Honda Civic 5DR FK e6*2007/46*0256*..CH/LI Civic 2.0i TypeR 1HA511CH/LI Civic 2.0i TypeR 1HA564CH/LI Civic 2.0i TypeR 1HA580CH/LI Honda Civic 1HA493 Compatible vehicles:VehicleVehicle typePowerEngine capacityEngine typeYear of construction Honda Civic (FK8)Type-R235kW / 320hp1996cm³K20C106.17 - 12.22

Facts: 15mm larger intake diameter +30hp on the Dyno Stage 3 Civic FK8 Type-R Brand: Eventuri Material: Carbon fibre Installation: like original part (exchange) Parts certificate: A certificate is available for this product for certain regions and vehicles (details below) By now it is clear that Eventuri is not your next run-of-the-mill company, but has a specific goal with exceptional products. The design of the new turbo tubes for the Civic FK2 and FK8 makes this clear once again. Small part, big effect: 15mm larger inlet diameter +30 hp on the Dyno Stage 3 Civic FK8 Type-R Naturally full carbon fibre Perfect fit Parts certificate Both the Eventuri Honda Civic FK2 Type-R Intake and the FK8 Type-R Intake were available in 2 versions. In both cases, the turbo pipe ONLY fits the new variants (V2) of the intakes. This means that for all customers with old (V1) intakes, the LMM pipe upgrade must first be purchased. Eventuri offers two variants for both pipes (FK2 and FK8): Each for V1 and V2 customers. Eventuri Turbo Tube for Honda Civic FK8 Type-R The turbo tube for the FK8 is available in 2 variants and only fits the Eventuri Intake. Variant 1: Customers with the old V1 Intake (old carbon LMM tube) Scope of delivery: - Carbon Turbo Tube - CNC turbo flanges - FK8 specific silicone tube - FK8 V2 carbon LMM tube Variant 2: Customers with the new V2 Intake (with new carbon LMM tube) Scope of delivery: - Carbon Turbo Tube - CNC turbo flanges - FK8 specific silicone pipe Parts certificate The manufacturer's specifications apply for installation. An existing certificate is no guarantee that the product can also be installed in the corresponding vehicle. A certificate is available for this product for the following regions and vehicles: * DE/AT: Vehicle registration document, field K --- CH/LI: Vehicle licence, field 24 Country Model Type approval* DE/AT Honda Civic 5DR FC e11*2007/46*3633*.. DE/AT Honda Civic 5DR FK e6*2007/46*0256*.. Compatible vehicles: VehicleVehicle typePowerEngine capacityEngine typeYear of construction Honda Civic (FK8)Type-R235kW / 320hp1996cm³K20C106.17 - 12.22

The Eventuri FK8 and FK2 engine cover is made of black carbon and red Kevlar and fits directly on the FK8 and also on the FK2 Type-R. Expert opinion: Material certificate Compatible vehicles:VehicleVehicle typePowerEngine capacityEngine typeYear of construction Honda Civic (FK2)Type-R228kW / 310hp1996cm³K20C108.15 - 12.16 Honda Civic (FK8)Type-R235kW / 320hp1996cm³K20C106.17 - 12.22

Transform your F97 into a high-performance powerhouse with the BlackBoost cooling air intake system. Experience more power, style and driving dynamics with this premium upgrade. In the world of performance modifications, the airbox is one of the most important engine components you should upgrade. The factory airbox is very restrictive in terms of airflow and filter area. Our cooling air intakes are designed and engineered to overcome these factory restrictions and deliver the maximum airflow with the lowest possible temperatures given the space available. The BlackBoost Cold Air Intakes are designed to be flush with the bonnet of the vehicle and ensure a consistent seal with the rubber seals of the airbox, whilst also ensuring a large surface area to work properly. The BlackBoost twin-flow filters are specifically designed to maximise airflow and surface area. The BlackBoost intake kit is a plug-and-play solution that works perfectly without further customisation and requires no additional software tuning. It also works smoothly in combination with turbo upgrades, downpipes, methanol injections etc. to unleash the necessary airflow and utilise the full capacity of the engine for those aiming for 1000+ WHP figures.Key Features:- Proven power increase from 8 to 30+ hp on production vehicles- Improved responsiveness across the entire rev range- Optimised airflow and increased volume range compared to standard equipment- Increased surface area of the filter elements- Can support airflow for 1000+ WHP configurations- Larger filter element surface area compared to OEM- Plug-and-play bolt-on installation- No ECU tuning required Compatible vehicles:BMW X3M (F97) 353kW | 480HP | 2993cm³ | S58BMW X3M (F97) Competition | 375kW | 510HP | 2993cm³ | S58 Attention: The intake can only be used in combination with the approved 670hp Stage and must be installed in an open configuration! The intake itself is not approved. Only with in-house installation!

The Competition intercooler kit fits the following vehicles:Ford Focus MK3 ST250 2,0L 184KW/250hp (2012+) Unleash the true power of your Ford Focus MK3 with our Competition high performance intercooler kit! Your Ford Focus MK3 deserves the best, and our Competition High Performance Intercooler Kit will ensure you get just that. Here's what you can expect: With mesh dimensions of 640mm x 200mm x 110mm, our intercooler offers an impressive 24% larger flow area compared to the factory radiator. This means your engine gets more air, resulting in a noticeable increase in power.Our kit offers an astonishing 60% more charge air volume than the stock radiator. This leads to improved combustion and ultimately more power and efficiency. Despite its impressive size, our intercooler weighs only 10.5 kg. The radiator's end boxes are made of cast aluminium and have been optimized for the best possible internal airflow using CAD designs. This guarantees optimal airflow and minimizes back pressure. Our competition high performance mesh is specially developed to provide excellent cooling characteristics. All our intercoolers have an anti-corrosion coating with excellent heat conduction properties to ensure long-lasting and optimal cooling. Installation is carried out by replacing the OEM intercooler and is easy to perform. No complex adjustments required. Our kit is completely ready to install and allows for a smooth plug-and-play experience. If you're out on the track or simply want to get the maximum performance out of your Ford Focus MK3, this kit is the right choice. We subject all our products to rigorous quality control to ensure they meet the highest standards. Don't miss the chance to take the performance of your Ford Focus MK3 to a new level. Visit our website for more information and to order your kit. Advantages of the Wagner Tuning intercooler:- improved cooling performance- 24% larger inflow area- 60% more charge air volume- flow-optimized- minimized back pressure- Plug & Play Scope of delivery:1 intercooler1 mounting material1 assembly instructionsAttention: Not approved in the area of the StVZO.

A high-end kit for a high-end car. The new F90 gets a new, innovative look. The new AERO body kit from 3DDesign for the F90 fits seamlessly into the familiar, discreetly aggressive race style of the 3DDesign lines. The iconic design is complemented by a perfect fit and the usual uncompromising quality. The real eye-catcher and centerpiece of the body kit - an carbon diffuser that is uncompromisingly and aggressively designed as a direct replacement part. The clear lines and curved shape fit perfectly into the image of the F90. Three inner fins not only ensure a racy look, but also optimum airflow. The F90 M5 carbon diffuser comes in two parts and can also be purchased separately. A performance diffuser for the F90, which is also a real visual upgrade! Pure luxury! Compatible vehicles:BMW 5 (G30, F90) M5 2017-2023BMW 5 (G30, F90) M5 Competition 2018-2023

The Wagner Tuning Competition intercooler kit EVO 2 fits the following vehicles:Volkswagen T5.1 2,5TDI 96KW/131hp 2003-2009*Volkswagen T5.1 2,5TDI 128KW/174hp 2003-2009** Vehicles with MKB: AXB, AXC, AXD, AXE, BLJ, BRR, BRS require the Wagner Tuning silicone hose kit on the driver's side. Ready to take your vehicle to the next level of performance? Our Competition high performance intercooler is the solution for demanding drivers who want maximum performance and optimum cooling. With net dimensions of 670 mm x 302 mm x 75 mm (= 15,175 cm³), this intercooler offers an impressive 40% larger flow area and an incredible 229% more charge air volume compared to the standard cooler. This means that your engine receives more air, resulting in a noticeable increase in performance. The Competition high-performance mesh has been specially developed and offers outstanding cooling properties. It allows your engine to operate at the optimum temperature. Despite its impressive performance, this high-performance intercooler weighs just 8.9 kg. The free-form end boxes made of high-quality cast aluminum have been developed in the CAD system to ensure the best possible internal air flow. With integrated air baffles in the inlet, this intercooler ensures even filling to maximize performance. The original click connections have been eliminated and the connection diameters at the inlet and outlet have been increased to a generous Ø65 mm. Our kit includes two reinforced silicone hoses to ensure excellent cooling with minimal back pressure. All our intercoolers have an anti-corrosion coating with excellent heat conduction properties. This ensures long-lasting and optimum cooling with a clear increase in performance. Installation is carried out at the original mounting points and is effortless. This intercooler is a 1:1 replacement that requires no complex modifications. Our products are subject to strict quality control procedures to ensure they meet the highest standards. Get ready to dominate the road and take your vehicle to a new level of performance. Our Competition high performance intercooler is the choice of champions. Order today and experience the power! Advantages of the Wagner Tuning intercooler:- improved cooling performance- 40% larger inflow area- 229% more charge air volume- Inlet and outlet extended to Ø65 mm- original mounting points (plug & play) OEM intercooler:Cooling surface 1440cm²charge air volume 4,6L Wagner Tuning intercooler:Cooling surface 2023cm²Charge air volume 15.2L Scope of delivery:1 intercooler2 silicone hoses1 aluminum adapter1 mounting material1 assembly instructionAttention: Not approved in the area of the StVZO.

Our light grey T-shirt with a white crossed-out area at chest height and a red Aulitzky Tuning logo on the front. The tuning lettering is covered by a black band across the chest and sleeves. So you're super stylish on the go and always well dressed. A cool look for every day :) Available in different sizes. Material: 100% organic cotton Washing instructions: 30°C / no tumble dryer